ml350 g5 extend array
Hello, I have a ML350 G5 server with Smart array controller E200i (128 Mb). I have a RAID5 array with 4 HD sas 72Gb 3,5" (3 + 1 hot spare).now, i have 2 free bays and i want to increse the archiving...
View ArticleOOPS...
Hey All, I have made a monumental stuff up - I have a DL380 G5, 2PSU, 2 CPU I am getting Internal Health Light Flashing at me. She was working and then just shut off, and thats all she wrote. Now, the...
View Articlelogical drive unavailable after a disk was replaced
Hi. I have a server with a long story. To understand a problem, I should first tell this story. I had a server with P212 controller and 12 drives 1.5Tb each. First two drives I used as a system mirror,...
View ArticleML310 G5 Raid1 Drive Replace
Let me start by saying I'm not an IT pro by any means and my knowledge with servers is limited. I also tried searching various things in this forum and searching the web but still have questions...
View ArticleIntermittent Connection
I recently upgraded a DL385 Gen 7 from Windows 2003 to 2008 R2. The connection to the switch is intermittent. The 2003 platform never experienced this issue. I've tried the latest broadcom drivers,...
View ArticleiLO 3 Web Interface not working
I have a Proliant DL380 G7 server running VMWare v5.0u3. iLO 3 firmware version 1.26. I can ping the associated IP address. I can access it via CLI (Putty SSH connection). But I cannot get the web...
View Articlemsa60 with sc44ge hba
Hey all, i use an ML110G7 with an MSA60. The Controller P411 shows the State of all DIsks on the MSA. Now i removed the P411 and use an sc44ge, but there show no status. All LEDs are off, only in...
View Articlehp management utility for solaris
I can find hp management utility for solaris, help pleasemy server dl 380 G5, smart array p400 server.
View ArticleInformsink support for hp-snmp-agents/hp service pack for proliant
Hi, We would like to use informsink instead of trapsink to send snmp alarms to our remote snmp trap reciever. When we configure /etc/snmp/snmpd.conf as follow: dlmod cmaX...
View ArticleDL380 G5 both power supplies led off
Hi, we've got a DL380 G5, and it has a problem with power supplies, both power supplies led are off, and the server won't boot. We've shutdown and opened the server to add memory dimms, and now the...
View ArticleUnusual number of FBWC modules failing... anyone else with this experience?
Since a couple of months we encounter an unusual number of failed FBWC modules. Some have problems charging the caps while others have "data in cache" that cannot be written to the drives.We tried all...
View ArticleWhich updates to download?
I have some ProLiant DL360 G7 and DL360p G8 servers. They are running ESXi 5.1 and 5.5.Security architect has mandated updating iLO and BIOS. Just curious as to which operating system I should...
View ArticleAdding a 2nd Power supply
to a ml350 G6 server. Is it as simple as ordering a matching power supply and inserting? Any BIOS settings need changed? Any other hardware required on motherboard? Thanks
View ArticleHP DL585 G7 thermal sensor cable and UID cable part numbers?
Hi, I am trying to find a replacement fan cable for my HP DL585 G7. The HP Proliant DL585 G7 Server Maintenance and Service Guide lists the cable in the cable kit: 594765-001, yet it does NOT list the...
View ArticleIntelligent Provisioning 1.60 breaks 2008 R2 install (will not accept product...
So I've got a pair of DL380p Gen8 servers here that are brand new from the factory (built about 3 weeks ago). The both came with Intelligent Provisioning 1.50. On the first one, I was able to install...
View ArticleCan't enter BIOS unless I remove the smart array raid controller
Hello, I know this post is quite old, but I cant enter bios unless I remove the smart array raid controller, or move it to another slot. Then it gives me the option to boot to BIOS along with other...
View ArticleImpossible to get Server Driver - Blocked during new Server Installation...
I hope this is a Joke, but i can't access any Drivers for my Server (no Warranty left since few months). Now I need to reinstall one of them, and what surprise, I cant access the Firmware upgrades nor...
View ArticleHP System Management Homepage v7.3.1.4
Hello Peers The SMH is not dispalying the Task Menu tab in the home page itself on Windows Server 2008 R2. I done the reinstallation of this tool but still the problem is not resolved. Is anybody gon...
View ArticleProliant DL980 G7 has 1TB RAM, but Xen Server 6.2 only recognizes 256GB of RAM
Hello, we have a problem using the VM server Xen version 6.2 in the Proliant DL980 G7, it has 1TB RAM, but Xen Server 6.2 only recognizes 256GB of RAM ... Other versions like Xen 6.0 and 6.1 recognizes...
View ArticleVersion Control Repository
Is the VCR no longer supported? I noticed that when updating the repository (i'm on latest version), the newest service pack it downloads is 2013.09.0B, but there is a 2014.02.0 available. It won't...
View Article