Proliant ml350 g4
I have a Proliant ML350 Gen 4 that had a HD failure. I replaced the drive and the array reuilt itself but it will not boot to Windows Server 2003. It has a PXE error and continues to reboot itself. I...
View ArticleDL560 GEN8 and vmWare
Hi, How can I establish 100% for sure prior to procuring that the following h/w configuration of a DL560 GEN8 will all be compatible with vmWare vSphere ESXi 5.5 without any suprises come install time...
View ArticleDL180 G6 troubleshooting PSU fan speed
Hi, I need some help !! On DL180 G6 server with 2X PSU, PSU's fan run at very high value on power on start ... and stay at the same level on normal process running. To return to normal run PSU's fan...
View ArticleTracking down original configs for old servers
Is there some reference point online here where I can punch in a serial number of an old server (in my case, I have 8 old ProLiant AMD-based servers) and get the original config? I know another...
View ArticleDelete an Array without data loss
Hi!I've a Proliant DL380 G5 server with two 73GB SAS disks in RAID1 array.The server is a VMware ESXi 5.1 serverThe question is: is possible to delete the array without loose data stored: OS, VMs,...
View ArticleDL380e Gen8 strange NIC icon Display
I have reloaded the O/S on this server several times first windows 2012R2, then R1 then R2 then R1, and finally back to R2 (These are the penalties of trying to keep up with the ragged bleeding edge. I...
View ArticleML110 G7 fan at 100% with P420
I have been using an ML110 G7 with P400 controller as my VMware lab for some time. It was always very noisy but I chose to live with it, after reading lots of posts from other users with the same...
View Articleproblem with an HP ML350 G5
HelloI have aproblem withan HPML350G5serverwhenever Iessyeinstalling theoperatingsystemI have thismessage:AError has occurredwhilereadingtheSmartStarthardwareinformationfile.Click"OK"...
View ArticleProliant ML110 G5 Server Problem
Hey,While upgrading some ran within this machine, its stopped working it wont even boot. Once the power button is p[ressed all the fans go on full pelt and nothing is displayed and no beeps.I've reset...
View Articleupgrade to 18.2 drives
I would like to upgrade my DL380 from four 9.1 drives to four. 18.2 drives. Where will I find the documentation on the steps to follow? thanks, ellis P.S. This thread has been moved from Disk to...
View ArticleML350 G5 and iLO Licensing - SNMP | IPMI
Hello ! We've got ML350 G5 servers with iLO 2 standard license. Does upgrading to higher iLO license will unlock new SNMP or IPMI data registers ? If it will, which ones ? many thanks !
View ArticleHPSUM 6.20 crashes when run from a mapped drive via the command line
After downloading the new 2014.02.0 Service Pack I have noticed that the (legacy???) command line I used to use with the previous HPSUM now crashes when run from a network drive. I use this...
View ArticleHP SUM Custom Baseline Problem
I'm trying to create a custom baseline to use with the hpsum command to install the drivers I want. I simply took the default baseline, copied it and changed the name, removed all the packages in the...
View ArticleGetting BIOS, Network, iLO settings via WBEM
I am trying to get system information using WMI, with the WBEM providers installed. Particularly, I'd like to be able to find some specific information about BIOS, Network, and iLO settings. Take BIOS...
View ArticleDL385G8 no controllers detected.
Hi there,I've got a new DL385 G8 which has a built in P420 controller...I was able to see this and configure it via the Array Configuration Utility.I upgraded the firmware using the Proliant Service...
View ArticleSmart Array E200i - "low battery voltage" even with new battery
Hi, we have a ProLiant ML350 G5 with a Smart Array E200i controller. Recently we noticed that "Cache is temporarly disabled due to low battery voltage (0x0001)" Array Accelerator Present: YesCache...
View ArticleNvidia Quadro K6000 - Drivers for DL380p G8 - Windows Server 2012 R2?
I know this is a long shot, considering I've already gone through HP support, and they haven't really given an answer... My company spec'd out 4 servers, and for the instance in question, (3) of these...
View ArticleCompaq Proliant ML 370
I have 3 SCSII Raid III disk already installed and am ruining Exchnage 2000 on it. I wat to install a new Drive.What will I need? What I have to keep in mind?Thank you P.S. This thread has been moevd...
View ArticleHPQLOCFG utility - bug with -s server name containing "-"
Not sure where else to file a bug report but wanted to try and get it fixed somehow. I'm using the HPQLOCFG (v1.0.0 dated 07/22/2013) utility to script ILO changes across my environment. My ILO DNS...
View ArticleExpand HD in Proliant DL380 G7
Hello, We have a Proliant DL380 G7 L (product 583917-B21) with all 6 HD connected (SAS MDL 2TB). PCI slots 2&3 full for FC (other PCI free: 1,4,5,6). We want to increase HD without formatting O.S....
View Article