Applying Offline Firmware without HP SUM or Firmware DVD ?
Hi, I've got an issue on a DL380 G7, where HP support are requesting that I upgrade the SAS Backplane Firmware from 1.14 to 1.18. Unfortunately the server in question is on a closed network, and remote...
View ArticleS.M.A.R.T. pre-fault error
On my proliant G6 I had on 2 HD (in different times) a S.M.A.R.T. pre-fault error. The Saart Array mark my HD and my RAID 5 Logical Drive with a yellow dot.My questio is:The pre-fault is a "prevision"...
View ArticleSmart Storage Administrator and Hyper-V 2012 R2 Core
HelloI am trying to install the Smart Storage Administrator on Hyper-V Server 2012 R2.Previously i installed HP Service Pack for ProLiant 2014.02.0 18 Feb 2014. I have a DL380 G6.Second i started...
View ArticleProliant DL360 G7 memory upgrade
Hi everybody. I need to upgrade a DL360 G7 server. At this moment the server have 32 GB with 8x4GB modules. The memory is single and the PN is 593339-TV1. My question is...can I upgrade memory with 8GB...
View ArticleHP ML350 Gen8 and Windows 2008R2
Hi, i'm trying to install MS Server 2008 R2 on a new ML350e Gen8. I have selected a Manual Install via Intelligent Provisioning. Bu the installation says that the CD/DVD driver is missing. Has anyone...
View ArticleProliant ML350 G5 Lights code
I have an HP Proliant ML350 G5 server and after a regular shut down at the shutdown button, it didn't came back. I haven't seen its logs for months, and I just have for now the front led panels:The...
View Articlecomaptiable network cards for ml350 g5
Hi All I have a ML350 G5 server and i need ti install another network card. Does anyone know if the TP Linl TG 3269 Gigabit pci will do the job. the other alternative is to buy one from USA and wait a...
View ArticleArray Accelerator Battery Charge Low - Error: 94 - HP DL 380 G5
Hi Guys,I found this error Post Error - Message: 1794-Drive Array - Array Accelerator Battery Charge Low - Error: 94 in diagnostic utility on a server HP DL 380 G5.The server automatically shutdown.The...
View ArticleML350p Gen8 beep at startup
Hello; I have a brand new ML350p Gen8 that we're setting up. When the system starts up, it emits an alarm(countinuous beep) at 2 times: 1 alarm during the DOS based part of startup, at about 6-7...
View Articlecpqlocfg.exe issues
Hello, I am using cpqlocfg.exe in a powershell script to gather ilo info from our server farm. It works great, but I have run into an issue. I am getting random text in the file created. It happens...
View ArticleLatest HP Agents and mysterious reboots...
I had a weird issue today with one of my DL380p Gen8 systems. It's running Windows Server 2012 and had all the latest HP software from the 2014.02 SPP. So here's the weird part... over the past week or...
View ArticleFailed disk on DL380
I have a failed disk on my DL380 server.Currently there are 4 disks configed to use Raid 5.If I replace the disk with the same size, will I have to change anything to get the data back onto the disk?Or...
View ArticleAdding Ultra320 36.4GB 15k SCSI drive to ProLiant ML110 G3
We have a new server in work which came with the a Ultra320 36.4GB drive installed. We purchased a second one but as I've never used SCSI before, I'm not sure how to set the correct ID.The part number...
View ArticleProliant ML150 G2 - HP SATA Drives only?
I had planned on using 3rd party SATA drives in my ML150 due to HP's pricing and minimal warranty on their hard drives. According to Seagate support and HP support, HP designed this server so that...
View Article10k RPM drives VS 15k RPM drives
I have a DL380 server that I am going to put some new hard drives in in a Raid5 configuration. I currently have 1 raid array that I am going to leave alone. It has 2 146gb 15k RPM drives in it.I was...
View ArticleHP Proliant ML 150 G2 - SATA Drivers Modules for CentOS 4.2
I have been installed a CentOS 4.2 on a HP Proliant ML150 G2, the CentOS 4.2 hasn`t the MV88SX6041 4port SATA ii (Hercules II) driver so i´ve been compiled them.If someone needs the drivers just send...
View Articleboot with an IDE HD on Proliant ML310 (first generation)
I'm trying to boot a proliant ML310 first generation with an IDE hard drive. The problems begin when the proliant try to start with the "non present" SCSI hard disc. This is a good reason for non start...
View ArticleLooking for SE326m1 bios upgrade
Hi to all, I have got a SE326m1 running Proliant system Bios R02 (july 2010) I'm looking for a rompaq bios to upgrade this SE326m1 and fix the ipmi security issue open in 2013. Unfortunately, this...
View ArticleFirmware Update issue
Hi, I recently applied the Service Pack for proliant servers 2014 release using the unattended setup on a DL580 G5 server. I believed I had already updated all items, but wanted to flash some new...
View ArticleArray Accelerator Battery has Failed
Hi, We have a ProLiant ML350 G5 server and have a warning saying the Array Accelerator Battery has Failed. The system management homepage says the Controller section is 'OK' but the accelerator section...
View Article