HPSUM fails with "node inventory failed" error on ML310Gen8 V2 w/Win 2012...
Hi, HP Service pack for Proliant installation failed with this error "localhost Node inventory failed" on a new ML310e gen8 v2 running Windows 2012 Essentials (ROK so everything is sourced from HP)....
View ArticleHP SIM categorizes all traps from vCenter as Informational
Trying to use SIM 7.3 all updates VMware MIBs updated, in the Events display no matter what alert I trigger in a hypervisor or vcenter, events just show asNot cleared InformationalvpxdAlarmInfoWhen...
View ArticleMicroserver B120i Array Driver 6.8.0.64 Bluescreens 2008R2 during chkdsk
Configuration: Stock Microserver G8 w/2GB. Three 1TB SATA drives. In RAID 1 or in RAID 0 config (doesn't matter). Win2008R2 with no roles installed. Run chkdsk on any volume and during stage 5 of...
View Articlesetting ILO remotely
Is it possible to set the ILO of a DL server in particular Gen8/ILO4 via arp?we don't have DNS
View Articlesetting ILO remotely
Is it possible to set the ILO of a DL server in particular Gen8/ILO4 via arp?we don't have DNS
View ArticleMaxtor 146Gb disk in DL380 G2
Hi guysI just purchased some Maxtor Atlas 10K U320 80 pin disks to get more space. The problem is that the activity lamp turns on when the disk is plugged in to the server - after a little while the...
View ArticleSwaping RAID-1 disks to new server
I have two identical DL360 servers. I want to take the two RAID-1 9.1 GB disks and put them in the other server. If the 2nd server had it's array controller setup for two RAID-1 9.1 GB discs would this...
View ArticleProlaint ML150 G2 - 4Port SATA PCI Controller RAID5?
Does the 4-port SATA PCI controller support a RAID5 configuration? Based on what I've been able to gather, it only supports 0 and 1. Thanks. P.S. This thread has been moevd from Disk to ProLiant...
View ArticleSetup RAID configuration with ILO?
My customer plans setting up new proliants DL360p Gen8 (with no installation on it) in a remote location.Is it possible to script the setup of a RAID configuration using ILO4? P.S. This thread has...
View Articlesmartstart 7.10 cann't create disk partition
I boot the ML 350 g4 server from smartstart CD, it discover the all disks, and the boot conroller is detemined.I choose all the options,at the create partition it take more time and didn't finish the...
View ArticleOnline upgrade of disks firmware
Hi, All!I have HP DL380 G3 server with Win2k installed. Can I online upgrade the firmware of hard disks like I upgrade firmware of controller, netcard etc? I can't find online firmware upgrade for...
View ArticleRAID 6 Expansion
Can you assist - not a technical background but can learn! - our ML370 G5 has a P400 controller (with battery/512) and is configured Raid 6 ADG with 4 disks. They were originally all 72gb, but due to...
View ArticleSMTP RAID Monitoring
Hii want to monitor RAID health by configuring SMTP alertsi've searched and i found some posts, it said that i require to install "HP Management Agents" and to be sure to have the service "HP Insight...
View ArticleHP WBEM Provider
Hi all, Sorry for the cross-post, i don't know where to post this. I'm trying to use the HP WBEM Provider Agent to monitor my servers. I have a few scripts that connect to the ports 443 or 5988/5989 on...
View ArticleHP DL180G6 and NC523 SFP 10GB Card
Hi, I am using a HP Proliant DL180G6 and want to add a 10GB NIC to the machine.The quickspecs of the NC523 lists the DL180G6 as a supported hardware But when the NC523 NIC is installed the server hangs...
View ArticleProliant ML350 Gen8 LFF non hot swap SSD installation
I am intereted in deploying a new HP Proliant ML350 Gen8 Large Form Factor server with two non hot swap SSD drives for the operating system and HP Enterprise Drives for the file storage. Where is a...
View ArticleUpgrade DL380 G6 with memory for max performance
I want to upgrade 2 of our GL380 G6 servers with new memory. Speed is the highest priority so it would seem best to use 3 channels per socket (2 sockets in use) (use all available slots, a total of 18...
View ArticleHP ML350P-T08, Drive cage questions
Hello, whe have some ML350P T08 SFF servers. I have a few questions about the drive cage's in these servers. I have noticed that I can expand these servers with 2 drive cage's. At least there is room...
View ArticleHP DL 360 G7
Working on a requirement and would like to know whether the below spec is still available in the market. Or is it getting End of Sale or End of Support. DL360G7 for Unix Server -...
View ArticleDL320 G4 (391657-421) with 2x 250GB SATA: what raid controller?
Hello,I have some DL320 G4 servers (391657-421) with 2x250GB SATA in mirror. They are used as shared webhosting servers (MS W2K3).As you probably know this server comes with an integrated controller...
View Article