improve ILO security
I have an HPE DL180G9 server, and it has ILO 2.70 I wanted to know if there is any one to improve security since my ILO has a direct internet connection, without going through any filter ... maybe...
View ArticleLost Lun from HP smart 420 controller
If this is in the wrong location please move.For the past day i have been looking for information on Recovering a RAID 5 with 4 drives on a HP smart array 420(i)LUN 1 : (Slot 1,2,3,5) has a logical...
View ArticleSPP Yum Repo: What is "current"?
Hello,In the HPE Software Delivery Repository there is a separate Yum repository for each SPP (For example for 2019.03) and in the upper directory there is also a "current" link. So far we have assumed...
View ArticleDL60 Gen9 memory compatibility
Hello everyone,I have HP DL60 Gen9 E5-2603v3, server (8 GB, P440/4GB, 4 x LFF - PN: P8Y75A). I need to add more 8 GB RAM, but I am not abe lto find the supplier, that is able to sell me new supported...
View ArticleInformation request
Hello I need to know this technical information about Hpe_Compaq disks installed on servers DL 360 ( DISKS SPARE 508010-001 capacity 2Tb Sas ).The data I need is the maximum value of vibrations that...
View ArticleDL380p Gen8 and E5 v2
Hello all,i use a DL380p Gen8 und try to use a E5-2643 V2 but the Server doesnt start and the ilo overview determine the CPU as E5-2640. The Bios is from 2015. Is this Bios too old? What Bios i need...
View ArticleIlo Amplifier 1.40 - Automatically add new hosts
I was able to add all server ILO ranges via ILO amp pack but i dont see an option to ensure new servers are automatically added. Under performance settings i see a refresh setting but that seems to...
View ArticleHelp with RAID Drivers
Hello,Attempting to install Windows Server 2016 on a Proliant DL360e Gen 8.The server has an HP Dynamic Smart Array B320i Raid controller.Can anyone advise as to which driver to use?I have grabbed...
View ArticleDL180 G6 fan noise and BMC SDR firmware number change
Hi. I've bought a DL180 G6 from eBay and have been really impressed with it EXCEPT for the fan noise. Reading a bit more can see that this is a tough issue to crack and the later versions (G8 / G9)...
View ArticleCould Intelligent Provisioning 3 be any worse?
Trying to install Windows 2016. I cannot assign a volume size to the boot partition - it uses the entire drive. I cannot assign an IP address to Windows before it boots - it automatically uses DHCP....
View ArticleML30 Gen10 Problem
I have purchased ML30 Gen10, then I wish to install the ESXi 6.7, however I note that ESXi doesn't support the Smart Array S100i, then I change the mind to install the Windows 2016, however which also...
View ArticleNC522SFP+
Hello all, i try to use the NC522. I try it with the 4.0.555 and 4.0.596 Firmware and all phanfw.bin from 4.0.555 to 4.0.590 but in no combination this Card is able to work. I try Debian9 und SUSE 11....
View ArticleToo many runtime ECC errors SIMM
Hi All, In one of our client Server DL580 G7 there is error pop-up and the server is getting hang, with too many runtime Errors in Array Controller. Kindly suggest
View ArticleHPE DL20 Gen10 - Fan Noise
Hi. I have an HPE DL20 Gen10 server. I installed Proxmox but in order to do so, I had to activate SATA support.I did this:...
View ArticleChange Drive bay 2.5 to 3.5 on DL388P Gen8 ?
Hey,A friend gave me a DL388P GEN8 which is really nice and on good condition.The problem is that the drive is: 8 x 2,5 sata drive, and I have only 3.5 HD.I bought on the web a 12x 3.5 harddrive bay,...
View ArticleAll of our HP servers kicked into high fan speeds for no obvious reason at...
We have three DL380 G10's in a hyper-v cluster. Two HP DL380 G9's. Two HP DL380 G8's. Two HP DL380 G7's. One HP DL380 G6... we have a P2000 G3 SAN, a 2040 SAN, and a 2052 SAN. I can't be sure...
View Articledl380e Gen 8 12LFF connect 12 sata ssd
Helloi have server dl380e Gen 8 12LFF (669257-B21)on board it have raid B120i i have only this raid on my serveri have basket (for 12 LFF HDD's) with back panel 647407-001 it connected with one...
View ArticleCAche memory permanenly failed
Dear All, We have a issue with one of our proliant DL 160 G9 server, which shows "the cache memory permanently failed". Even after replacing the smart Storage battery also the same issue shows. is...
View Article