Prosesor Intel Xeon X5690 compatible with HP ProLiant ML350 G6 Server?
I have an HP ProLiant ML350 G6 Server, I want to add a second processor. I'm going to buy an Prosesor Intel Xeon X5690. Is this processor compatible with my server?good GPU recommendations for my...
View ArticleProLiant DL380 G7 HDD Power Supply Status: Not Redundant
Hi, I have ProLiant DL380 G7 with RAID 1 configuration. One of the HDD's (in Bay 2) has "Power Supply Status: Not Redundant" issue. Is this a power supply or a hard drive issue? Is replacing the hard...
View ArticleHPE DL360 G7 firmware update
Hi all,could anyone help send me the link to download dl260 g7 ( BIOS (Entitlement Required) - System ROMi have tried this link but can't download, while click download it's contact warranty and...
View ArticleDl380 Gen 10 Windows Server 2016
HI have a DL380 Gen10 with Windows Server 2019 Datacenter. Where can i download Windows Server 2016 for HPE DL380 gen10 ISO to install Windows Server 2016?
View ArticleML310e Gen8 Smart Array P410 no SATA drive LED's
Hello,I just purchased a "refurbished" ML310e Gen8 with a P410 array. Raid array is 4 4TB SATA drives in a Raid 5 configuration.I have tested all the hardware and updated to the latest firmware....
View Articlewhile booting HP ProLiant DL360p Generation 8 getting ilo embedded health...
Folks,I replace system board on HP ProLiant DL360p Generation 8 and after that i rebooted machine but it gets stuck on bios at 68% iLo embedded health initialization
View ArticleG8 DL 380p server and p840 controller
Hi,I have G8 DL 380p server and I would like to buy p840 controller. Is it possible to use it in G8 server? Is there some a technical limit?I would like to extend my server about 25 sff cage and I want...
View ArticleHP Gen9 RAID 6 to RAID 5 Migration
Hi ExpertsI have a HP Gen 9 server ( Live server of the client and not the test system ) .. accidently one of the logical group in that server was setup in RAID 6 and we wanted it to be in RAID 5....
View ArticleClik here to view.
DL380p No physical disks attached...
HP DL380p Gen 8:After the Proliant service pack "P03093_001_spp-Gen8.1-SPPGen81.4" has been successfully installed, one of our servers does not start anymore.There is a message that no disks are...
View ArticleDL380s Gen10 - Mass iLO and BIOS config
Hi, I've managed to make use of the ilorest and HPEiLOCmdlets to do some automation (updating firmware/ilo for instance) and the powershell scripts for getting server information. I was wondering if...
View Article1785-slot 0 drive array not configured
J'ai un serveur HP Compaq Proliant 3000 qui boot pas et affiche le code d'erreur :1785-slot 3 drive array not configuredDrive positions apper to have been changed.Run Array Diagnostics Utility (ADU) if...
View ArticleOffline HP Array Configuration Utility Image Version compatible à HP Compaq...
Pourriez vous nous assistés à télécharger l’utilitaire : Offline HP Array Configuration Utility Image Version compatible à HP Compaq Poliant 3000, pour restaurer le positionnement RAID
View ArticleThe software is not supported for installation on this system.
I Have this issue with a lot of servers. INCL GEN10'sThe software is not supported for installation on this system.The installation program couldn't find the appropriate system management controller...
View ArticleSUM: missing RPM package for version 8.4.5
SUM 8.4.5 was released together with the latest SPP (2019.09):Release Summary: The 2019.09.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9 and Gen10 server...
View ArticleML350p Gen8 - Sata motherboard connector speeds
Hello everyone,There are 3 sata connectors on the server motherboard (one used by optical drive). Can someone tell me if they are Sata II or Sata III???I was disappointed to learn the p420i runs at...
View Articlemigrating a RAID set
I have a DL380 12LF GEN 9 HP840ar Win 2008R2 with 2 x 1TB drives in RAID O volume for the system drive and 7 x 8TB drives (6+1) RAID 5 data volume. I would like to physicall move the RAID 5 7 x 8TB...
View ArticleProliant ML350 G9 Temperature sensor 40 location
Hi all, I wonder if anyone can help?A customer has an ML350 G9 which is less than 2 weeks out of warranty (typical). It reboots seconds after powering on and iLO recrods a critical temperature alert at...
View ArticleChange 6gb speed 1TB hot swap SAS drives for 12gb speed drives on the fly?
I want to try and improve the disk access speed of our HP DL380 G9 server. We have a RAID-5 array (Smart Array P440ar) with 4 x 1TB drives (giving 3TB total). So that I don't have to take our main...
View ArticleHP proliant DL360G7 HP server source failure
I have an HP proliant DL360G7 server, with a power source, this works without problems but when an electrical failure occurs, my ups come into operation but the server turns off immediately and two...
View ArticleCan not access Intelligent Provisioning HPE DL388 Gen10
i can not access to intelligent provisioning via F10, that was error "smart array - Drive is failed: Port ?? Box 0 Bay"How fix this ? thanks a lot
View Article