Can I suppress battery failed messages on servers with Drive Arrays?
I recently took over monitoring of our HP servers and the manager of the server group asked if I could suppress the battery failed messages since we don’t need the accelerator option of the array. If...
View ArticleControlling which IP to send SNMP traps from
We have a multi-homed server, and one of the NICs has multiple IPs on it.Server is running Windows Server 2012 We need to have just SNMP traps sent from the second IP address. I saw a similar article...
View ArticleHP NC550SFP RSS, RDMA & SMB Multipath support
Hello, Can anyone tell me if the NC550SFP 10gb card supports RSS and RDMA for SMB 3.0 multichannel support? Or if not, how to find out? Not listed on the specs. Thanks
View Articleml310e gen8 - How do I use SATA Port 6 as the boot drive with the hot-swap...
I have a Proliant ML310e Gen8 server which I plan to use as a fileserver with ZFS. For ZFS purposes the hot-swap cage is set to AHCI mode instead of RAID. My OS drive is installed on the spare...
View ArticleML350 G5 server goes down randomly
Starting this week, our ML350 G5 server running Win2k3 has started to fail, it goes down several times a day now. What happens is the fans stop and the server goes down. Both the external LEDs on the...
View ArticleML310 G5 Raid1 Drive Replace
Posting again because I'm desperate for an answer. Have a ProLiant ML310 G5 with Raid 1 config containing (2) 250gb drives. One of the drives is showing "SMART failed" upon boot so I am trying to swap...
View ArticleHard disk replacement
Hi,I've just upgrade two hard disk on a proliant DL360. The old disks were 36 GB, and the new ones are 320Gb.Now I have a volume of 36 Gb, and I'd like to expand it to 100 Gb, and create a new one with...
View Article6-Port SATA RAID Controller
Hi,I will purchase a ML350G4p with 5 SATA Drives and want to setup a RAID 1 and RAID 5.But before that i need to know : Does the "6-Port SATA RAID Controller" [372953-B21]supports 2 differents RAID...
View ArticleSubject: ProLiant DL760 and SmartArray 5300 problem
Hi All,We have a ProLiant DL760 (OS: Windows 2000 server) server with 14 disk cage(SW4214) attached through SmartArray 5300 controller. Disk cage has a 8 disk array (RAID 5 with spare) which has 2...
View ArticleProblem in ML350 G4p and SATA
(My english is far from good)I have a ML350 G4p with a SmartArray 641 SCSI RAID controller and I need to conect a 250 Gbytes SATA disk to the Onboard SATA Controller, but the disk is not detected in...
View ArticleUser Slowness
Recently the users in my office have been complaining about slow logons, slow intranet access, and slow file access. Originally I thought it might be a virus or spyware taking up all my network...
View ArticleCaddy for DL380 G5 (2.5in hot plug)?
Hello,does any of you happen to know the part number of the 2.5" SATA hard disk caddy for a DL380 G5? There is something at http://www.scsi4me.com/product_info.php?products_id=1585but I'd like to get...
View ArticleRolling back RAID 5 using 2 from 3 drives
I have a Smart Array 5300 Controller (5304-128) and have upsized the three drives in a RAID 5 array. I redeployed one of the three drives that I removed, and set the other two aside. Due to data loss...
View ArticleHard Drive space
I have a HP DL320 G2- Server 2003. I just added a 320 gig Maxtor and the system only reconizes 137 gigs. I can't find any Bios upgrades to fix the problem. Or is there any software I can used to be...
View ArticleSCSI Port 2 : I/O Board Responding at Wrong SCSI ID.
Hi,I have a DL585 configured with an external array connected to to a 6402 Array controller.I am receiving a message reporting "SCSI Port 2 : I/O Board Responding at Wrong SCSI ID"I have changed the...
View ArticleRaid manager software under Linux
Hi,I'm about to start using HP Proliant hardware with SUSE SLES 10. Can anyone point me to information (user manual or similar) for HP raid management software under Linux? I'm familiar with the IBM...
View ArticleInstall OS in Proliant ML330 but I get no Hard Disk Found.
I just purchased a Proliant ML330 server with no OS installed for one of our clients. We want to install NT4 Terminal Services on it for now because thats all they have license for at this time. When I...
View ArticleActive -Active Clustering a DL380 GC
Does anyone know if it's possible to configure the Smart Array Cluster Controller to support Active-Active Clustering? p.S. This thread ahs been moevd from ProLiant Servers - Netservers to to ProLiant...
View ArticleProLiant DL580 and DL360 servers
Can anyone direct me to a SOLID point of reference is on where I can get accurate power draw data on CPQ servers? I have a critical need for this data given a specific build out (4x700MHz Xeon w/ 4GB...
View ArticleCompaq Insight Manager 4.21 SSD configuration
We are attempting to achieve the following: - We are using IBM Director 4.1 to gather SNMP alerts across our network. - We still have some Compaq Proliant Servers in our environment. - We have Insight...
View Article