Expand array on DL360 P408i-a
Hello all,As the current array gets low on available disk space I want to expand the current array by adding 2 drives.Server HPE ProLiant DL360 gen 10Drives 6x HPE 1TB 6G...
View ArticleHow do I find age of a DL/Appollo/BL servers
I have 300+ servers in my lab. I would like to find the age of each server by decoding the serial number. Is it possible?All servers are less than 10 years old.
View ArticleDL380 GEN9 - NVME Enablement Express Bay kit question
Hi,I was wondering if anyone would oblige sharing the limitations of installing/using the NVME express bay kit?My points of concern are:1) I been advised that if this option is installed, we can only...
View Articleindicate the boot order of my server's HDDs
Hello, please I need the indications to indicate the boot order of the HDDs of my server. My server has 4 HDDs, of which I only need to boot one and the other disks recognize them, but when entering...
View ArticleHPE MSA 2052 DRS
I have recently configured HPE MSA 2052 to use with Vmware vSphere 7.0 and came across below while reading best MSA 2052 practices guide.Question: Do i have to configure anything in MSA 2052 to harness...
View ArticleClik here to view.
Upgrading from VMW 6.7 to 7.0 on HPE PL G10 with HPE custom ISO
HI This https://kb.vmware.com/s/article/78389 preventing me from upgrading & VMW support says this. Can you advise pls ?Yes, this issue is caused when drivers are built with older vmkapi version...
View ArticleHow to install Centos Linux on DL560 Gen 10?
We have couple Proliant DL560 Gen 10. I need to create a bootable USB drive with Linux Centos 7 or 8 to do diagnostic from server to server. When I boot the Usb key created with Unetbootin containing...
View ArticleClik here to view.
HP 380P Gen8 HBA unknown
Hello everyone Any suggession on this system ROM P70 08/02/2014PCI CARD on slot 3 - QLE3242 - HP PCI CARD on slot 5 - AJ764-63002 (SP P/N 489191 -001) Thank you
View ArticleDL 380 gen8 System ROM
Hello every one can i add this system rom(2019.05.24(12 Jun 2019)) https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX-f999a22b47af43ca897c0835be#tab2to the SPP 2019.09.0 or any other method...
View ArticleML350e G8 - Will not power on.
Hi, my server will not power on - it makes a rythmic tick noise from the psu and health light and power light dimly flash together (red and green respectively) once a second. Is this a failed psu?...
View ArticleML350e G8 - Will now power on but will not post/ boot. pink screen!
Hi, my server will not power on - it makes a rythmic tick noise from the psu and health light and power light dimly flash together (red and green respectively) once a second. Is this a failed psu?...
View ArticleI bought a used DL360 Gen 9 from Bargain Computer in UK
Hello!I have just bought a used HP Server, a ProLiant DL360 Gen9 that I want to use for my private laborations. I tried to download the latest BIOS for this server and was presented with a support...
View ArticleClik here to view.
Temperature sensor problem HP ProLiant Microserver Gen10
Good morning,I verified the following problem: "The computer shuts down properly. When I turn it on, the following message appears. Then it shuts down and starts working again."I also attach the...
View ArticleDL360 Gen8 P420 Compatible SAS Drives
Hi,does anyone know whether the following bare drive would be compatible with a DL360 Gen 8 with P420 controller :HP 697387-001 300GB 15000RPM SAS 6GBPS SFF (2.5INCH) HARD DRIVE WITH TRAY FOR M6710...
View ArticleFATAL ROM ERROR
Hello community. I'm a Foxconn employee at the Houston, Texas location and we service HP Servers. I'm working on a DL380p running Windows. During post I get an error message that states there is a...
View ArticleAccessing ILO4 Integrated Remote Console through tunnel
Hello everyone,I have a Proliant DL20 Gen9. From the local network I can access the .NET remote terminal without any issue (I don't know why I get an UnsatisfiedLinkError exception when I try to use...
View ArticleRecover data from failed HP DL380 G7 server
One of our HP DL380 G7 servers with 3 HDD configured as RAID5 failed this morning and the issue seems to be with the motherboard and the server does not boot up anymore as it powers off within 10...
View Article