iLO5 Remote Konsole - Tastatur ESC, F9, F10 ... funktioniert nicht bei neuem...
Hallo,seit ein paar Monaten haben wir mit den Gen10-Servern gelegentlich das Problem, dass bei der Vorbereitung (im Lager), oder nachdem der Server im Rechenzentrum im Rack installiert wurde, das...
View ArticleP420I Raid Config issue
I came across a intresting issue and hope someone can shed some light on this for me.I have a DL380 which has an Internal P420i which runs the 8.32(C) firmware which is installed on the Server. A few...
View ArticleProliant ML350 Gen10 Statement of Volatility
I am trying to obtain the letter of volatility for the ProLiant ML350 Gen10 machine. I can find other letters for other systems, but cannot find one for this particular system. Thanks in advance.
View ArticleI can't access to intelligent provisioning via F10
Hi Techsupport,Why I can't access to intelligent provisioning via F10? it straight shows "error: no such device: EMBEDDED346" after tap on F10. Refer to below for HP server details:OS: Microsoft...
View ArticleDL20 Gen10 - NVMe - High fan speed
I currently have a problem with my DL20 Gen10, when using a non-HPE NVMe M.2 SSD.I have installede the dedicated iLO card, and when installing the NVMe M.2, the fans run close to 100%.Advisory: HPE...
View ArticleHPE P830 SmartCache option not available
I have P830 raid installed and I have:7x 4TB SATA HDD and1x 3.8TB SAS SSDThe SSA shows I have HPE SmartCache licence Built-In, Active, and Full features.When I look trough the SSA , I don't see any...
View ArticleHPE ProLiant SL4540 Gen8 Rack Server - System Overview
The highly efficient converged design offers a balance of performance and storage capacity in a densely-packed 4.3U space. The converged infrastructure design means cooling, power, and network...
View ArticleDL20 G9 Intelligent Provisioning error dijit is not defined
My homelab DL20 Gen9 server are working fine, but after few version Bios and iLO4 update, I couldn't use IP function to install new OS. after F10 to select 'Intelligent Provisioning' , it show error...
View ArticleGen9 and NVME Enablement Kit
Hello all,i use an DL380 Gen9 Server and try to use the NVME Enablement Kit with 6x SFF Disks. No Linux OS recognize the NVME Disk. All Firmware Updates are done.Debian see the PLX Controller and load...
View ArticlePROLIANT DL360 G9 - Legacy boot failure
Hello All, im trying to host an older platform which has its complications. but the Legacy bios option will not allow a boot to commence. So using a USB 2.0 for DVD rom booting no Go, using usb...
View ArticleDL380P G8 - P822 not showing in ACU
Hello,Have a DL380 Server with internal P420i connected to internall cage and working fine.Recently we add a P822 at PCI Slot 1 to connect to a D2700 storage. Server and Storage Controllers are updated...
View ArticleP822 Connection to D2700 Enclosure
Hello, Im sorry by my Lack of knowledge. We have a P822 controller connected to a D2700 Storage.One mini sas cable from P822 port1 to IO Module A.Should we add another cable from P822 port2 to IO...
View ArticleClik here to view.
Proliant ml150 g5 540-BMC SDR version error
Hello to everyone.I have faced a problem on my hp server.I don't know why but once then I rebooted it, server has strated a long time and coolers've run very loudly. There is some errors:Flashing BMC...
View ArticleWindows Server 2012 Installation Tutorial
Windows Server 2012 Installation TutorialPrepare Windows Server 2012 DVD installer firstIf so, enter the DVD installer into the computer you want to installTurn on the computer and enter the boot menu....
View ArticleClik here to view.
Mensaje de advertencia en DL180 G9
Buen dia a todos,Tengo el servidor mencioando y se ve este mensaje que la verdad no parece decir la razon, ya actualice ultima BIOS y Controlador pero sigua saliendo en el mensaje.En la ILO 4 todo se...
View ArticleHDD Not detected on bios (Hp ProLiant Dl20 Gen 9)
Our pc is forced reset after that we turn on the pc but when we look at the bios hard drive it is not detected. has anyone experienced this and what is the solutionThanks for your answers or suggestions.
View ArticleIntelligent Provisioning booting problem in DL380 gen10
Hi guysI put myself in a trouble after trying to ugrade my DL380 gen10 server ILO 5 version from 1.4 to 2.31. and Intelligent Provisioning from 3.30.213 to 3.50.after doing that I couldn't boot to...
View ArticleThe speed of processor 18 in group 0 is being limited by system firmware
Proliant DL380 G7. BIOS is P67. ILO is 1.93.The speed of processor 18 in group 0 is being limited by system firmwareis repeated over and over in my Windows Event notifications as Warnings, with...
View Article540-BMC SDR version error (Proliant ml150 g5 )
Hello to everyone.I have faced a problem on my hp server.I don't know why but once then I rebooted it, server has strated a long time and coolers've run very loudly. There is some errors:Flashing BMC...
View Article