Samsung PM1725 in DL380 G7
Hi Everyone I was hoping somebody could tell me if a Samsung PM1725 6.4TB SSD TLC PCI-Express Gen 3.0 x8 NVMe PCIe Solid State Drive was a viable option for a DL380 Gen7 Server. We have one working in...
View ArticleClik here to view.
DL380 gen 7 memory
While increasing the memory of the DL380 gen7 server, I checked that each server has supported memory.However, since all the purchased memories are discontinued, the memory not on the list operates, so...
View ArticleNVMe speed slow with debian and HP G8 DL360
Hi,We have 25 Servers HP DL360 G8 with Debian and Proxmox OS. (latest versions)We have Samasung Evo 970 plus 1 TB NVMe on these servers.But read/write speed max is 950MB!If we install...
View ArticleML30 - ILO on 1GB port
Hi,Is it ok if I use a 1GB port as an ILO port for ILO Standard?I know the dedicated ILO port is best practice, but in theory, what would prevent to use one ethernet port?
View ArticleP440ar Array Controller Gen9 problem with different sets of harddrives
Hello community,I have a strange problem for which I seek advice. The system is a DL380 Gen9 (SFF version) with a Smart Array P440ar controller (+ battery) which shows an odd error message depending on...
View Articlehp prolaint ml 150 gen 9 server restart issue
Respected Sir/Madam , hp prolaint ml 150 gen 9 server has restart while intialize memory
View ArticleP408i-a SR Gen10 configure HBA mode?
Hi folks,i got a DL360 server with HPE Smart Array P408i-a SR Gen10 installed on it.my target is to put the server's HDDs and SDDs under HBA mode(not RAID, just present to OS directly) so that the...
View ArticleDrive missing & Failed after firware upgrade
I have a drive which was working before and after we upgraded the system and firmware the disk shows "Unknown" & "Failed". We have a windows server 2012R2.We see the device drivers are all upto...
View ArticleCan't access PXE settings for Flexfabric 554FLB
I'm trying to turn PXE on for a Flexfabric 554FLB in a blade server.During POST I can see the option to hit Ctrl-P for the utility. I do this, it accepts the command, and tells me it will load after...
View ArticleDL 140 G3 Windows 10 install
Hello,I'm trying to perform a bare metal Windows 10 install on a DL 140 G3, but every time at around 30% it locks up. I even tried installing Windows 7, activating, and then installing all updates and...
View ArticleClik here to view.
HPE DL60 Gen9: is my mainboard faulty? No PCI devices detected.
Hi, I have just bought a HPE Ethernet 10Gb 2-port 530SFP+ for my DL60 G9.On The ILO > System Information > Device Inventory, the NIC Card is in UNKNOWN status and UNKNOWN location.The card does...
View ArticleHow do I know how many simultaneous video streams server support
Hi I want to know how do I know how many simultaneous video or movies streams a server support I will buy the HPE ProLiant MicroServer Gen10 but I want to be able to stream 100 clients how do I know...
View ArticleAES_NI Support on the DL380 G7?
Hello community, my question is a support AES_NI in this model. How a setup (enable) this function on this model?
View Articlehp dl585 g2 fan connectors/ no fan inserted block
i recently got my dl585 g2 for just messing around but 1 fan is dead. i still want it to run so could i be able to run the tacho signal of one fan to another connector? if that is the way it detects...
View Articlepcie layout of hp dl585 g2
does anyone know which pcie slots are connected to the cpu and which to the chipset? i havent worked with servers before so idk if they maby all go to the chipset scince it is a multi socket...
View ArticleINCREASE RAID 1 on Server - Blade - HP - WS460c Gen9
HI all,need your support here:system details:- Server - Blade - HP - WS460c Gen9- OS: windows server 2012 R2-SMART ARRAY P244BR-SMART STORAGE ADMINISTRATOR 2.60.18.0current configuration:RAID 12...
View ArticleProliant Gen10 network loss on SPP update
I was attempting to update my Proliant Gen 10 with the latest SPP (09.2020) and during the process lost network connectivity. The update had not started yet, it was just doing inventory. I ended up...
View ArticleProLiant ML350p Gen8 - System Fans constantly stepping up to 100%
This school's ProLiant ML350p Gen8 Server, has been a godsend for some years, and now recently, over the last 6 months has changed to deafening anyone nearby with jet engine sound effects as the fans...
View ArticleHP Proliant DL380 Gen9 OS (RHEL 7.9) Installation Issue
Hi Everyone,As stated in the subject I am having issue while installing OS. The issue is. There was already an OS (RHEL 6.8) was running on the server. I wanted to re install the OS. For that, I...
View ArticleClik here to view.
DL380 Gen 10 swap LFF Drive cage for SFF
I have a DL380 Gen 10 which was ordered incorrectly (P19717-B21). It should have one 826690-B21 Gen10 Premium 6 SFF SAS/SATA + 2 NVMe or 8 SFF SAS/SATA Bay Kit but it arrived with the 8 LFF. Can I...
View Article