DL380 Gen8 - Insight Manager?, Smart Update Manager? and Service Pack for...
Hi, could some one give me some info on these various bits of software... Way back when you setup a Proliant, Smartstart would install the variuos HP drivers along with Insight Manager and off you...
View ArticleHP ProLiant ML150 G6 Server hard drive problem
i have an old HP ProLiant ML150 G6 Server with windows server 2003 that has 3 disk 1 ,2 ,3 TB , irecently buy new wd 4 tb green but the problem that it sees only 1.7 tb regards P.S. This thread has...
View ArticleValid Data Found in Array Accelerator
We recently had a drive failure on our ML 530 server, RAID 5 with an online spare. We unplugged the faulty drive, and plugged in the new 18Gb SCSI drive. It seemed to rebuild the drives fine, but after...
View ArticleRebuilding Array onto Online Spare
I have a client that had a failed hot plug drive on a ProLiant ML350 server that was part of a RAID5 array and was told by Compaq Support to remove the failed drive from the server to read out the part...
View ArticleSeeking hot plug drive cage (new type) for old harddrive
We have 4 hotplug harddrive 1 inch 18.2 GB from a compaq proliant 5500 model. Now we bought a new ML370 server that only supports the new type drive cages for hot pluggable drives (the red/black ones...
View ArticleB320i firmware update not possible (through ESXi console)
Good day, I'm trying to update the B320i raid controllers of our DL380e through the ESXi console From the HP Support Center I found this: Type: Firmware - Storage ControllerVersion: 15.10.05.00 (27 Feb...
View Article530SFP+ NIC on DL360 Gen7
We have some recently purchased HP 530SFP+ 10Gb network cards (652503-B21). They were originally purchased for use in some DL380 Gen 8 servers. Howerver, we we would like to put one in a DL360 G7....
View ArticleDL380p g8 - boot order and NIC issues
Hello all, I'm sorry if any of this was already discussed in a different topic but I can't seem to find an answer to my current issue and I was wondering if others had similar before. We recently got a...
View ArticleReplacing QLOGIC FC card
Hi, I have a DL380 G4 with two QLOGIC FC cards for connectivity to a StorageWorks 2/8q Fiber Channel Switch, for accessing the MSA 1000 Datastore. The problem is that one of the QLOGIC FC card of...
View ArticleProliant Blade and DL Server EOL and End of Support
Hi,i need to know the data for EOL and End of support for the following servers. your quick response will be highly appreciated. Blade System c7000 Enclosure ProLiant BL460c G1 Blade system c7000...
View ArticleHP ML350G6 Raid 1 Failure
i have a server HP ML350G6 with 10k sas 146gb x2 configured RAID1, but now 1 of the HDD failure can i straight replace a clean HDD to the server or i need to format the OS?
View ArticleSE326M1 - DL180 G6 Rack Server - Fan speed constantly at 80%
I purchased a "SE326M1 G6 Twin Xeon Hex Core L5640 48GB RAM 2U HP Proliant DL180 G6 Rack Server" on eBay. As it didn't come with any hard drives I bought four caddies and some third party SATA hard...
View ArticleHP Proliant hard disk smart errors.
Does anyone know a way to detect these via a script? Do they appear in the eventlogs at all? Thanks in advance.
View ArticleProblem with Intelligent Provisioning on DL380 G8
Hi, I am currently trying to get a server built for a new SQL install. Just to give forewarning, I am not particularly expert in server provisioning. Configured the arrays, copied server 2008R2 onto a...
View Articleproblems after changing hard drive
hi forum i have an problem with an hard drive in my server.it is an ml350 g5 with an p400 controller.there are two raids installed - on raid 1 an one raid5 with an spare disk one of the disks in the...
View ArticleTurning my HP ML350p Gen8 Server into an desktop PC for editing video.
Hello everyone, I am new here and hope to find some answers to my question without annoying you.I assume most of you guys are experts. My question to you: Can anybody recommend me a graphic card AND...
View ArticleDL 360 G8 and HP Ethernet 10Gb 2-port 561FLR-T
Hello, We have highly customized Automated Server builds and we are using WinPE 3.0 boot media. We are mainly IBM Shop and decided to evaluate HP Proliant Server DL360 and DL 380 Gen 8. I am stuck at a...
View ArticleDL360 G7 with Smart Array P410i - Drive Upgrades
I've got a DL360 G7 currently with 2 146G SAS drives in an array under RAID 0. Those drives are in Bays 1 & 2. My goal is to upgrade the entire system to have 4 300G SAS drives, without losing the...
View ArticleSmart Array p410 - cannot remove spare from SATA array
Hi, I have a p410 smart array controller with 3 arrayNote: controller and HDD have the lastest firmware installed A) 1 SAS array (1x2disks) 148Gb hotswapB) 1 SAS array (1x2disks) 300Gb hotswapC) 1 Raid...
View ArticleDL320e G8 V2 Rack Kit - 723903-B21 - WHERE?????
Where is this part available people??? Isn't showing stateside or in Europe....... help please!! P.S. This thread has been moved from Servers > General to ProLiant Servers (ML,DL,SL). - Hp Forum...
View Article