HP ProLiant DL180 G6 2 NICs connected to Cisco2960S-Stack caused network...
hello, I am a network engineer and not server admin. Just want to understand how it is possible. Our server admin just installed a new HP ProLiant DL180 G6, connected 2 ethernet ports to...
View ArticleHP Proliant ML350p Gen 8 Micro Server for office LAN
Hello, we have an HP Proliant ML350p Gen 8 Micro Server with 4 Cores, Intel Xeon E5-2609 Processor, 2.40 GHZ speed, 3TB, HDD capacity. The OS is Multipoint Server Premium 2012. Initially it was to be...
View ArticleGraphic adapter for HP DL380p G8 Server
Dear All, I have a HP DL380p G8 Server, I search a graphic adapter with 1GB compatible with my server.After full search on the HP Web Site, I have not find what I need. Please help me to find a graphic...
View ArticleRAID 5 Configuration with 1 hot spare - 2 drives flashing amber - what to do?
Hi Guys,I have a question before changing out failed drives.I have a customer with a HP ProLiant ML370 G5Windows 2003 Small Business Server SP 2and Smart Array P400 Controller.There are 4 x 146GB SAS...
View ArticleServer 2012R2 WDS PXE-E55: proxyDHCP service did not reply to request on port...
Built new WDS on platform to include DHCP and DNS. Imported Boot and Install images from previous WDS hosted on DL360G5. Came across this issue when trying to pxe and image new OOTB HP Elitebook 840 G1...
View ArticleML370 G6 Randomly rebooting
Hello, I have an ML370 G6 with a Xeon E5620 running SBS 2011 x64 that has been consistently rebooting at random times. I checked the logs and have found that it's a consistent stop error code: 0x07F...
View ArticleML350 G6 BIOS Battery
I recentaly relocated a four year old ML350 G6. It failed to boot following the total power down, and it transpired that the BIOS had been reset. Once that and the BIOS clock was sorted, it booted...
View Article10GBE with Cicso
Hi All, I've got some 530SFP+ with (652503-B21) with these sfp's as suggested in the quick spec's HP BLc 10G SFP+ SR Transceiver (455883-B21) will this work ok with a cisco 4500 with SFP-10G-SR=...
View ArticleProliant DL360 G6 Accelerator Board Battery Failed
Hi, We are experiencing the below : Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 500143800999B660 Cache Serial Number: PAAVP9SZ98N7 RAID 6 (ADG) Status:...
View ArticleNo Link on 82571EB Gigabit Ethenet Controller
Hi, my 82571EB Ethernet Nic has two ports. But just the first interface has a link! BIOS and Xenserver shows both NICs, so it seems to work... "Has Link" means, the LEDs are blinking. When doing a...
View ArticleUnable to HP Service Pack for ProLiant With Active Care Packs
Hello, I have my servers Care Packs registered with my account but I am unable to download the HP Service Pack for ProLiant (SPP) Version 2014.06.0. I click on the Obtain software button and it sends...
View ArticleDL380 G5 Riser Bus Unresponsive
Good morning, This is my first time posting to the forums, so I apologize if I miss any necessary information, but here it goes: We have a ProLiant DL380 G5 server that is being used to host all of our...
View ArticleESXi 5.5 VMDirectPath 'workaround' mentioned in Customer Advisory c03835455
Hello, I have read about the limitation of not being able to use VMDirectPath with ESXi 5.5 and HP ProLiant servers, other than with graphics cards. The customer advisory that mentions this is...
View ArticleProliant ML110 G3 - Smart Array E200 (Ready for Recovery)
Hi, I'm having problem trying to re-build my RAID 5 array, one of my HDD went bad so I replaced it with a new same capacity HDD, at 1st it initialize until 100% then just sits there saying "Ready for...
View Articlehp-OpenIPMI failing
I have an ML350 G6 server running SLES 11 (x64). I cannot get hp-health or hp-snmp-agents to run, apparently due to an issue with hp-OpenIPMI. When I go to /opt/hp/hp-OpenIPMI and run...
View ArticleBoot to CDROM Issue of iLO3...
Hi every masters,I mount the local image by iLO's Remote Console.I find even I set the CDROM as the priority one boot device of RBSU or press F11 to control 1/0 (People can see the below picture -...
View Articleboot failure after ip settings
HiI have a dl380e g8.I set ip settings in centos remotely using ilo, and when i rebooted the system, it messaged me:attemting boot from nic pxe-e61: media test failure, check cablepxe-m0f: exiting...
View ArticleSmart Array P800 Controller Accelerator issue
Hello there.We are running a DL180 G6 with a Smart Array P800 disc controller and 8 harddrives in RAID 5.When logging into the server using HP System Management Homepage it states that the...
View ArticleProblem downloading latest Service Pack for ProLiant DVD
I have tried to download the latest SPP DVD (2014.06.0) and get the message "Access to the kiosk product denied.There is no product associated with this merchant.Please check with your support." I...
View ArticleHP ProLiant DL360p Gen8 748301-S01
I am looking to get HP ProLiant DL360p Gen8 748301-S01, however I would like to also get extra RAM....
View Article