iLO 4 firmware v1.51 & OpenSSL 'ChangeCipherSpec' MiTM Vulnerability
I have a set of HP DL380p G8 servers with iLO 4. The Nessus security scanners are picking up a high vulnerability on the iLO IP's with the latest firmware v1.51 (23 June 2014) installed OpenSSL...
View ArticleRequire HP proliant DL380 G5 BIOS AND FIRMWARE ISO
Hello, could somebody send me the link for HP proliant DL380 G5 BIOS AND FIRMWARE ISO?
View ArticleDL785 G6 Windows 2012?
Hi,a customer has a bunch of DL785 G6 Proliant servers and want to install Windows 2012 on them.From the driver repository on HP website no Windows 2012 is listed.Is it planned from HP to support those...
View ArticleHP ML 350 G8 SERVER fan issue
HP ML 350 G8 SERVER fan making loud noise. Made thermal configuration in RBSU to " optimal cooling " but same issue. We have 6 other HP ML 350 G8 servers in different sites which works fine. Please help.
View ArticleP222 Smart Array in Gen6 DL180?
Hello guys, I've had a look at the documentation, but it does not specifically help. What I'd like to know is if I can run a P222 Smart Array with an older Gen6 DL180 (8 x 3.5" drives in R10). We are...
View ArticleMemory Upgrade
I have HP Proliant DL380G6 with 12 gb memory (6 pieces of 2 gb). P/n 500202-061.Could i add 2 pieces of HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 ?Will it work?
View ArticleClik here to view.
P420i Raid Controller not showing in SNMP or HP SMH on DL380p Gen 8 Server
I've just come across a Hyper-V Host Server that seems to be setup exactly the same as the other servers at this particular site. The only difference is that the physical disks don't show up in the HP...
View Article350 g6 overtemp?
I have a number of ml350g 6 that will click on and imedietly back off. led on systemboard looks like it is the overtempeture error. installed are known working cpu, memory fans etc. all parts including...
View ArticleMoving disks to another server.
There are two identical servers. HP Proliant DL 380 G4 with Smart Array 6i in Embedded Slot. One of them was broken. We know nothing about its array configuration. Is it possible to move the disks to...
View ArticleASR detected by system ROM
Hello, colleagues!I have a server HP ProLiant ML350p Gen8 with Windows Server 2008 R2 Enterprise on board.Yesterday server was rebooted without my permission.At iLO log I found one event at time, when...
View ArticleReplacing failed drive
We've got an old ML370G3 server with a RAID 5 array consisting of 3 drives. One of the drives has failed. We've tried reseating the drive, but it isn't working. We've got 3 drives of the same model...
View ArticleSystem Management Homepage version 7.2.4.1
Hi I need to upgrade system management homepage on some servers, the upgrade looks straight forward enough. I just wanted someone to confirm if there is any pre reqs regarding what version of HP...
View ArticleWhere can I find drivers for the ML370T01?
I have a ML370T01, where can I find drivers? I have searched HP's website and found nothing. Not even any archive stuff. Looking for some drivers for the mobo and chipset etc. Thanks,
View ArticleUnable to get iLO2 working with Active Directory for authentication
Hi, all, I'm at my wits end. I'm trying to get an iLO-2 equipped server to use Active Directory for authentication and failing miserably. I've read dozens of posts and articles and used an HP utility...
View ArticleML350 Gen8 - Supply power to PCI Express
We have installed a USB3.0 card into the PCI Express slot but it requires a SATA power connection to function properly. Whats the best way of getting power to the card? The two issues i can see are...
View ArticleMemory upgrade fails ML110 G6
Hello I tried to upgrade my memory on my HP Proliant ML110 G6. I bought 2x Kingston KVR1333D3E9S/8G 10600E CL9 ECC Unbuffered Unregistered. No matter what I do the server won’t start with these two...
View ArticleDL380 G8 - 2 hard drive cages with RAID 10 ?
Hi, does anyone know if it is possible to have a DL380 G8 Server fitted with 2 internal hard drive cages configured for RAID 10 using 12 drives (8 drives in one cage 4 in the other) ? We have done this...
View ArticlePower Supply warning on ML 350
HP System Management shows "Bay1: Power Supply Status: Inlet Temp High Warning"Not sure what happens and how to resolve this issue.Thanks.Steven
View ArticleStorageWorks D2600 and DL580 Gen8
Hi there, I have just been handed a new HP DL580 Gen8 and StorageWorks D2600 and asked to configure them quickly. The issue I am facing is the D2600 is not recognized by the DL580. I have connected the...
View ArticleHP Proliant DL380 G6 with HP 1.28TB Multi Level Cell PCIe ioDrive Duo
Hello guys, I've buyed an HP 1.28TB Multi Level Cell PCIe ioDrive Duo for my Proliant DL 380 G6. This board absorb 25W from the PCI-E bus, but require an external power to reach the best performace...
View Article