Quantcast
Channel: ProLiant Servers (ML,DL,SL) topics
Viewing all 10362 articles
Browse latest View live

Duplicated traps from iLO & ESX

$
0
0

Hello everyone.

Brand new DL360 Gen9 - latest SPP applied , iLO4 v2.40 , ESX 6.0 U2 (HP image)

I have a very strange issue with traps from iLO.

When iLO is having some internal issue (easy test - just reset iLO) it sends traps not only from it's own IP , but also on behalf of ESX management IP (attachment).

As I understood, this might be possible only if "SNMP Pass-thru" is enable. But this is not the case - I'm using "Agentless Management". Also I'm runing a few other servers with iLo3 &ilO4 and had never seen such issue.

Is it something new with iLo v. 2.40 ? Any advice what to do or what to check to avoid duplicated traps ?

Kind Regards,

Alex.


Can a dual slot video card fit inside a dl380 g6? (gtx 600 oc)

$
0
0

Hello all, I'm in need of better graphics performance on my server (hopefully I can use remotefx), mainly for some vms I will be running, they need to be able to at least stream video, probably 480p ish or so, nothing massive.

I have a desktop with a faulty motherboard, but a still practically new gtx 660 oc in it, and my new dl380 g6 came without any pci risers, meaning I can get whichever ones I need, provided with the part number.

I will need this cable, wherever it hooks into the server (Haven't checked yet, I need to finish some tasks on it before I can open it up) http://www.ebay.com/itm/10pin-to-6-6pin-Power-Adapter-Cable-for-HP-DL380-G6-and-GPU-50cm-/141964323791?hash=item210dbbabcf:g:7ekAAOSwD2pXFeHo, but I'm wondering if any of the pcie risers will allow it to fit inside the server?

It would be incredibly awesome if they would, and all I'd need is the part number for which one I need. The graphics card should be just fine at pcie 8x, which is what seems to be available.

Which Model of Video Card foro Pro Liant ML310 G2 ?

$
0
0

Unfortunatelyonboard video cardof my Pro Liant ML310 G2.seemsburned.
Server Mainborad has got following slot :

PCI_Express x4
PCI-X
32-bit/33 Mhz 3.3V PCI

In which slot do i have to place a dedicate video card ?
Somenone could suggest me which model of video card add in ?

Thank you in advance, Alessio

DL380 G7, Install Windows on onboard Intel SATA Option

$
0
0

Hi

I have an DL380 G7, where I have attached a SSD Disk to the onboard SATA controller, Intel 5520 Chipset.

I can see at POST, that the server correctly identifies the drive as a hard disk, and shows the correct model number.

But when I have booted up my Windows Install DVD and selects the drive/partition, I get an error that windows can't create or locate any partitions on that drive.

Do anyone know if it is possible to install windows to that controller?

What I have tried is selecting the Intel controller at boot controller, and I have found some Intel drivers and tried to load them at the disk selection screen, but still same result.

Regards Lars

Install Display Card In ProLiant DL580 Gen8 Server

$
0
0
My Product Name: ProLiant DL580 Gen8 Server
We have a ProLiant DL580 Gen8 Server and want to install Gigabyte GForce GTX 980 ti Display Card in PCIE slot, When we connect 8 pins sockets power, server could not turn on, and when power socket not connected, server starts but the graphic card could not detect in server, now my question is: 

does this server supports this graphic card? if yes, what's the problem?

our power cable is regular cable 8 pins.
 
 

iLO 4 ProLiant DL360 Gen9 - eRs Active Health Report Failed: Client Receive Error

$
0
0

Hello,

Last eRS reported that a new version of iLO was available and we have updated it or no reports would be sent

( Well not really the eRS report but there would be some issues. If needed I can post the whole list. Wasn't able to find  this error on the list outdated version my cause),

We have updated iLO 4 and current version is: 2.40 http://i.imgur.com/WsX4y0M.png

Now this time iLo  didn't send an report and I'm unable to find anything on google and when searching here on community I keep getting everything on German :/

Img: http://i.imgur.com/AFAfcDm.png

Any help is welcome.

HP SMH not displaying server components for HP ProLiant DL360 G4 Server ?

$
0
0

Hi All,

I'm curently running Windows Server 2008 R2 on my HP ProLiant DL360 G4 Server.

After installing all the necessary update and files using HP SPP 2016.04 why I cannot see the server hardware components in the System management Homepage ?

Capture2.JPG

Any help would be greatly appreciated.

Noisy fans from DL 360p G4 server ?

$
0
0

Hi,

My user is complaining that the server in the server rack is running noisy.

The server is HP DL 360p G4

So I wonder what can I do to reduce the speed of the fans ?

I have blow the dust out using comrpessed air but somehow, it is not fixing the loud noise from the fans.


Problem with HP Smart Array P410i and SAS Expander Card it shows error 1746 - Unsupported Storage

$
0
0

I have an HP Server G7 and when installing a SAS Expander card it shows error 1746 - Unsupported Storage Connection Detected - SAS connection via expander is not supported on this controller model Access to all storage has been disable.

W7 on Proliant DL360 Gen9

$
0
0

Can I install W7 or W10 on a Proliant DL360 Gen9 system?

When I try to boot from the disc (MS W7) I immediately see alot of error codes on the screen; however, if I use HP Intelligent Provisioning software, I receive the message "Please insert the correct media."

I haven't tried installing a server OS, but this leads me to wonder if it is even possible to install W7 or W10 on this particular system.

Cant Ping Dl380 G9 - Win Server 2012 R2

$
0
0

I am newbie and recently installed Windows Server 2012 R2 in HP Proliant DL380 G9. I have configured static IP in Embedded LOM 1 Port 1. Internet is working fine. I can also ping client machines from server which is connected on same network. But my problem is I cant ping my server IP from client machines. It sound weird and I never ever faced this weird issue before .

Can someone please assist me in this regards.

DL360 G6 End of Support

$
0
0

What is the End of Support date for the DL 360 G6 server?

ML360P Gen8 hangs when trying to install Server 2012 R2

$
0
0

Server preiviously had Server 2008 R2 and I am rebuilding. Upgraded IP to 1.62b and can go though the wizard, select all the options but when it tries to boot to the media I just get a windows logo with a spinning circle and stays forever. I also tried to boot directly to media and get same thing never get to point where I can install OS.

ML350P Gen8 hangs when trying to install Server 2012 R2

$
0
0

Server preiviously had Server 2008 R2 and I am rebuilding. Upgraded IP to 1.62b and can go though the wizard, select all the options but when it tries to boot to the media I just get a windows logo with a spinning circle and stays forever. I also tried to boot directly to media and get same thing never get to point where I can install OS.

HP Proliant ML150 G3 GPU?

$
0
0

Could anyone point me to some good GPU reccommedations any at all?

I recently pick the ML150 G3 at a dump for $5NZD ($3.50USD) looking to make a project out of it.

Currently I am going to buy x2 INTEL XEON E5335 QUAD CORE 2.00GHz CPU and I am now looking for a GPU if any.

I am also looking to upgrade the ram from 2gb to 8gb in the near future (Not of huge concern).

I installed Windows 7 on a HDD and then hooked it up, then wiping the 15k rpm HDD that came with the PC. SO OS is not of any problem.

I really don't mind which GPU is reccomended as (if its compatible with the Mobo) I really don't mind if it can run games that well and is more to show off a pretty good PC that I picked up from the dump.

Thank you

Kind Regards

YSStudios


RAID 1 rebuild stuck on 0%

$
0
0

Hi,

One of my clients has an old HP Proliant ML150 G6 1.0 with a B110i raid controller .

All weekend the server was down and this morning the office manager restarted the server and selected F1 to start a rebuild because there was some error about the raid-1 consistency.

Now when I access the Smart Array B110i SATA RAID Controller on System Board via HP System Management, it shows an exclamation mark on Logical Drive 1 - Mirroring (RAID 1) and states the following:

Percent Rebuild Complete: 0% and this percentage is not growing at all. Looks as if it is stuck there.

All the drives are OK with green check marks

My question is: Why does it need a rebuild if the drives show OK? I have not replaced any drives.

Have a look at the attached image.

Thanks and regards

Alfred56

Thanks and

Recover a BIOS Mode backup on a ML30 with UEFI Boot

$
0
0

I have to Recover a Bios Backup (ML310) to a ML30

Setting ML30 to Legacy BIOS Mode -> the  Smart Array isnt reconized
Setting ML30 to UEFI Boot Mode-> the Recover stops with a Error (BIOS on UEFI not possibile...)

Some One with the BIG Idea??

Thx Benedikt 

Smart Array in BIOS Mode on ML30

$
0
0

Is it possible to make the Smart Array work in the BIOS Mode ?

Thx Benedikt

 

HP DL360 Gen9 - Unable to launch HPSSA

$
0
0

Hello,

We have 2 new HP DL360 Gen9 to configure and with one of them it is impossible to launch the HP Smart Storage Administrator.

When the server boots up, I select F9, go to the RAID Controller menu and select 'Exit and launch HP Smart Storage Administrator (HPSSA)' but nothing happen.
The menu is frozen for a few seconds and the HPSSA doesn't start.

If I start the server and boot from the HP SPP, I can launch the HPSSA.

We have already swapped the smart array controller with the second server, we have forced the deployment of all the firmware but that doesn't solve the problem.

Can you tell me how I can correct this ?

Thanks in advance for your help.

Marc

 

Install HP SPP via powershell

$
0
0

When I run the commands to install the NEW SPP_2016.0.4.0:

 

$arg = "/use_latest","/allow_non_bundle_components","/silent","/r"

Start-Process -FilePath .\hpsum.bat -ArgumentList $arg

 

I get an exit code, but I have checked the GUI and there are several driver/firmware installs that can be done..

[Information] 5/2/2016 9:22:26 AM -- Exit code : 3, Exit Message : The node is up-to-date. No update is required.

 

 

What am I doing wrong?

Viewing all 10362 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>