Quantcast
Channel: ProLiant Servers (ML,DL,SL) topics
Viewing all 10362 articles
Browse latest View live
↧

How to disable BIOS password HP dl 120 G7 Server ?

January 29, 2014, 8:50 pm
$
0
0

I have HP Server dl 120 G7 Server. Actually have enable bios password defaultly.

I want to ask about how to disable bios password ?

Because i need my machine running automatically when server is reboot without entering bios password

 

 

Thanks

↧
Search

Some please stop me spending time on this easy thing?

January 30, 2014, 10:56 am
$
0
0

I spent 3 days just to make bootable iso to be able to upgrade ilo firmware remotely via kvm. Someone please but please show me correct way.

 

This is the file

I am not an expert on bootable file. All I need to make an iso and upgrade ilo remotely via KVM (Not the virtual media within ilo itself. With an external kvm)

↧
↧

RAM compatibility

January 31, 2014, 2:15 am
$
0
0

I have new Proliant DL360p Gen8 hardware that I wish to deploy as a VM 5.01 host.

We have just been thru a memory upgrade in our blade chassis and have 4 GB 2Rx4 PC3-1600R09-10-E1-P1 RAM spare from this project. The RAM supplied with the server is 4 GB 1Rx4 PC3L-1600R-09-11-C2-P2.

Q1. Is it possible to run this left over RAM in this server to boost available memory for the vital host duties this hardware will run?

Q2. Is it acceptable to mix the 2 different RAM modules or should I replace the current RAM with the earlier version if possible?

Any help would be greatly appreciated, Thanks.

 --------------------------------------------------------------------------------------------------------------------------------------------

PS- This thread has been moved from Community Feedback and Suggestions to Proloiant Servers (ML, DL) - Forum Moderator

↧

HP DL320e

January 31, 2014, 2:49 am
$
0
0

hi,I boughtthedle320ehpserverfrom an online store..but it is normalthat it is soldwithout evena caddy?
The secondproblem is this.
I canusethegenericSATAdisksinthis server?
I possessoverthegenericsata,this hard disk:http://www.amazon.com
/VB0250EAVER-HP-250GB-SATA-Drive/dp/B009EV7NU6

is compatible with my server?

thanks :)

 

p.s sorry for my bad english :(

↧

DL140 Lo license is not being accepted.

January 31, 2014, 6:36 am
$
0
0

I have two DL140 and I recently upgraded their lo firmware. But one of them does accept the license but does not turn virtual kvm on. Do you have any idea?

↧
↧

How do I remove the iLO Advance license from my MicroServer Gen8?

January 31, 2014, 3:04 pm
$
0
0

I wish to remove the iLO 4 Advance license from my MicroSever Gen8. How can I do it?

 

Thank you

↧

DL380 G4 Fan Noise Very Loud

January 31, 2014, 4:46 pm
$
0
0

Hello all, I have been scouring the internet for weeks and have found many posts, but no solutions for the aweful 100% fan speed noise on my DL380 G4. I am pulling my hair out trying to find a way to slow this rocket ship down!

 

Motherboard - 359251-001 (single core CPU's only)

OS - Server 2008 R2 (set up as a domain controller and DFS file share server)

Memory - Maxed out at 12GB (all slots populated)

CPU - Currently 3.4Ghz Xeon (2x 3.8Ghz Xeons in rout along with a second VRM)

 

Does anyone have a solution to this once and for all?

 

Things I have tried :

 

(All temps reporting very low)

 

Bios updated - P51 (2007 date)

Updated all management drivers & Software

All 8 fans are populated and green lit - there is no change in fan speed when removing any or all of the redundant fans.

 

Thoughts :

This machine only has one PSU installed. Could this cause the fans to run at 100%? It appears to only have been sold with one PSU. If anyone can help I would owe you lots of beers.

↧

ML350 G5 low performance with E200i (single drive)

February 1, 2014, 5:51 am
$
0
0

I got myself a ProLiant ML350 server equipped with an embedded 200i raid controller but I'm pretty disappointed with the onboard SAS/SATA controller's performance.

Since I don't plan to use RAID (it's just a home server sitting in the attic) i connected a single SSD drive (120GB Adata S511) to use it for the operating system but i'm getting horrible speeds in HDTune.

 

The cache battery is empty so it has no write back cache enabled but would it cause such a major problem? The normal speed of my SSD is around 275MB/s on a normal SATAII controller.

 

Thank you in advance!

 

By the way: is there any workaround to enable wb cache even if the battery isn't good anymore? Can I use my SSD drive without the E200i making it a "HP Logic Array"?

↧
Search

HP Lights Out 100 Offline Firmware Update Error

February 1, 2014, 11:50 am
$
0
0

Do you have any idea;

 

root@vztl6:/# ./CP021014.scexe
./CP021014.scexe: 153: [: ./CP021014.xml: unexpected operator
./CP021014.scexe: 151: ./CP021014.scexe: pushd: not found
./CP021014.scexe: 159: [: ./CP021014.xml:0: unexpected operator
./CP021014.scexe: 159: [: ./CP021014.xml:0: unexpected operator
./CP021014.scexe: 173: ./CP021014.scexe: popd: not found
./hpsetup: 3: ./hpsetup: shopt: not found
Parameters are: --source /
HP Lights Out 100 Offline Firmware Update Engine
     Copyright (c) 2009 - Hewlett Packard
-----------------------------------------------
Running with --source /
Parsing --source /
CHECKING: --source
CHECKING: /
./hpsetup: 16: ./hpsetup: ./lo100flash: not found
Found IPMI - checking results
cp: cannot stat `CP021014_disc.xml': No such file or directory
cat: discovery.xml: No such file or directory
cat: discovery.xml: No such file or directory
Package 4.26 - currently at
Firmware binary payload is LdrImage.bin
Firmware package is version 4.26
./hpsetup: 140: [: unexpected operator
Flashing firmware
./hpsetup: 158: ./hpsetup: ./lo100flash: not found

 

↧
↧

Replacement drive has a faster speed, 15K. ML350 G5 using smart Array E200i built into system board.

February 1, 2014, 7:56 pm
$
0
0

Hello,

My ML350 G5,smart Array E200i is configured using a Raid 5 with a hot spare, 4 drives total.

All 4 drives are HP 10K, SAS, 72 Gig. I have a Replacement drive which has a faster speed: HP drive 15K, SAS, 72 Gig.

Will the replacement drive with a faster speed be fine to use without any long term issues? I'm assuming the new 15K drive will pass data through at the speed of 10K. I'm using the on board smart array E200i array.

Thank you for your time!

↧

ProLiant ML350 G4P and VMWare

February 2, 2014, 9:39 am
$
0
0

I have this server running Server 2008 x64 and installed VMWare 10, but when I try to spin up a 64-bit OS in VMWare, it says it cannot do it and the system would need to be in long mode.  The Intel Chipset is an E7520 which supposedly is capable of this feature, but I'm not sure how to do this.  Any help would be appreciated.  Thanks.

↧

DL320 p400 raid problem

March 19, 2009, 4:20 pm
$
0
0
Hello, I have this strange problem.

Here is an exempt from ADU:

Redundant Failure Reason 0x00
Unsupported NILE Busses 0x00
Host I2C Autorev 0x01
CPLD Revision 0x00
Fibre Chip Count 0 (0x00)
Daughterboard Type 0x00
More Swapped Cable Flags 0x00
License Key Status 0x00
Access Module Status 0x07
Features Supported 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xC1
ROM Inactive Revision 5.26
Active ROM Status 0x01
PPC to PCI Bridge Status 0x00
Redundant Server Info 0x00000000
Percent Write Cache 75% (0x4b)
Daughterboard Size In MB 256 MB (0x0100)
Cache Battery Count 1 (0x01)
Total Available Memory Size 256 KB (0x0100)
...
Read Cache Size 52 KB (0x0034)
Write Cache Size 156 KB (0x009c)
Disable Flag Enabled (0x00)
Offset To Extended Cache Disabled Map 0x00f8
Offset To Extended Cache Failure Map 0x0100
Offset To Extended Read Cache Disabled Map 0x0000
Total Structure Length 0x00000110
Maximum Logical Units Supported 64 (0x0040)
Offset To Extended Write Cache Disabled Map 0x0000
Fixed Structure Length 0x000000f8

AS you can see: Daughterboard Size In MB 256 MB
why do I have 256KB cache total???
Any help is appreciated.

P.S. attached is the whole report.
↧

failing disk RAID 1+0

October 14, 2009, 3:55 am
$
0
0
I have ML350G5 server on witch i have RAID 1+0 array with 2 SAS drives set on P400 controller. One of drives is reporting S.M.A.R.T predictive failure. I am looking for the right procedure to replace failing drive and rebuild array. My boot partition is on that array.
↧
↧

HP Proliant DL 380 G4

November 1, 2007, 3:59 am
$
0
0
Hi,

I would like to install an additional SCSI interface in the above server to run a second Ultrium tape drive.

Can anyone recommend a card?

Thanks

Lee
↧

Proliant m350 G3

October 5, 2006, 4:35 am
$
0
0
I am trying to set up a new hard driive oon my server and it is scsi I can not get the new drive to work
↧
Search

Server halt one in 3-4 days.

February 3, 2014, 2:31 pm
$
0
0

If it is a real temp. issue. System would not be able to run for couple days, but it halts down dues to high temp. issue.

 

System log is attached. One fan is missing. But it has been runing so for more than year. I also upgraded all firmwares but still same. Do you suggest playing configs in bios?  Only if I unplug power cord it can run for couple of days.

↧

Upgrade to processor on ML350

February 4, 2014, 12:14 am
$
0
0

Added a 2nd processor to an ML350 G2 1266mhz.

On boot up the server gave an error saying that we did not have a backup second power pack. I stopped boot up just in case it caused further problems.

Does anyone know whether this error was just for information or whether we do need to purchase a backup power pack?

Thanks for any help offered.

Julie

 

 

P.S. This thread has been moved from Storage > General to  ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

↧
↧

RAID Logical Drive needs recovery

February 4, 2014, 1:35 am
$
0
0

Hi all,

 

We have a Proliant DL380 G7 and we use it as a standalone ESXi host.

 

We have RAID 1+0 setup with 6 x 300Gb drives.  The ESXi OS runs on a USB or SD card, so the logical drive is purely used as a VMware datastore.

 

We recently noticed we had 2 drives showing an orange LED.  So wanting to check the RAID config as we didnt think 2 drives could fail.  VMware only shows the capacity as 558Gb of usable space, so we are not sure if this volume was properly configured in the first place.

 

I have attched an image of the RAID config screen.  The confusing thing is that the status of all the physical drives is 'OK'.  It also states that the logica drive 'needs recovery'.

 

I have rebooted the server, and skipped the recovery, and the server booted fine, and the datastore is still as it should be.  My only worry is that if I run the recovery, it might corrupt the datastore.  

 

Should I replace the drives with an orange LED whilst the server is powered on, even though they are apparently OK??

 

Am I safe to run the recovery on next boot?

 

Thanks in advance.

↧

DL320 Gen8 v2 and SAS2 15k disks

February 4, 2014, 2:58 am
↧

LightOuts connection resets.

February 4, 2014, 7:17 am
$
0
0

I am behing a nat using internal ip. (Not sure if it is firewall or port forwarding issue)

 

When virtual media is active, I am getting;

 

com.serverengines.rdr.BadlOException: java.net S ocketException: Connection reset

 

error and next 10 sec. console window is not avaliable.  Do you have any idea ? I forwarded these ports to my internal ip;

5900-5909 5500 17990 17988 80 443 623 664

 

See attached ss.

↧
Viewing all 10362 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>