Help required for fixing our primary ROM invalid

September 19, 2018, 7:47 am

≪ Previous: SHA2 Support on HPE Proliant DL 380 Gen8/9 servers

Hello,

I wanted to apply the latest BIOS (version from 21/05/2018 - cp036547.exe) for our ProLiant ML370 G6.

During the POST, I could notice the following error "REDUNDANT ROM ERROR: Primary ROM invalid. Booting backup rom. Run ROMPaq to correct error condition".

I then decided to try to create a bootable USB key media (ROMPaq) by using SP99324.exe. When I run the HPEUSB.exe to format the USB key and create the bootable key, I have the following errors:

- syslinux.exe has crashed
- Take too long to execute.

I tried this from different machines with different OS (Win 7, 8.1, Server 2008 R2) but the same happened.

Do you see a way that would allow me to fix our primary ROM ?

Thank you by advance.

↧

ML370 G5 Dsk issue

September 19, 2018, 8:35 am

≫ Next: ML350p Gen8 - How many LFF hot plug bays can I install?

≪ Previous: Help required for fixing our primary ROM invalid

Hi all.

I have a Proliant ML370 G5 with a bit of strange problem . There are 8 disks in the first drive bay and disks 5-8 are all showing red leds on the disks. The disks are healthy and not showing any errors in the systems management page. I have also check the array controller firmware and it is running the latest firmware.

Has anyone seen this issue before ?

Thanks for the help

Andrew

↧

ML350p Gen8 - How many LFF hot plug bays can I install?

September 19, 2018, 11:50 am

≫ Next: Latest SPP for Proliant DL380/DL60 G9

≪ Previous: ML370 G5 Dsk issue

I've got a ML350p Gen8 with an LFF cage. I believe it's:

HP 5U 6 Large Form Factor (LFF) Hot Plug Drive Cage Kit 659485-B21

Can I purchase multiples of this, install P420/P430s and run them? Main question is if they will mount in the blank spots above and below the optical drive.

Thanks!

↧

Latest SPP for Proliant DL380/DL60 G9

September 19, 2018, 11:19 pm

≫ Next: Is SSD Updates will be part of SPP ISO Bundle?

≪ Previous: ML350p Gen8 - How many LFF hot plug bays can I install?

Hello,

I was wondering which are the latest, official, version of Service Pack for Proliant (SPP) for the following servers:

HPE ProLiant DL60 Gen9
HPE ProLiant DL380 Gen9

Regards

↧

Is SSD Updates will be part of SPP ISO Bundle?

September 19, 2018, 11:24 pm

≫ Next: Gen 10 - Device Driver

≪ Previous: Latest SPP for Proliant DL380/DL60 G9

HI Team,

I am working on Upgrading ILO servers using SSP ISO bundle.

Just need to confirm, Is SDD drivers also get upgraded using SPP ISO bundle?

Thanks,

Thiyagu

↧

Gen 10 - Device Driver

September 20, 2018, 1:12 am

≫ Next: what happe this 20/09/2018 at hpe portal ?

≪ Previous: Is SSD Updates will be part of SPP ISO Bundle?

I am pretty frustrated with a gen10 server we just bought. Intelligent provisining failed to load so I thought updating it would work. The server then failed to recognise the USB. So I gave up on updating intelligent provisoning.

To get around this I tried installing Server 2016 manually. RAID and ILO setup perfectly fine. Now it needs a device drive for the purposes of RAID. So I downloaded the latest SP pack thinking that would solve the problems. This SP pack doesn't have any drivers related to the array. The array hardware we have is P408i-a SR Gen10. This is driving me crazy and the support we have received hasn't been the best. The only drivers I am finding is related to Flash on the HP site and the service pack downloaded has no compatible drivers as it is for different hardware. Please help!

Regards,

Gareth

↧

what happe this 20/09/2018 at hpe portal ?

September 20, 2018, 6:40 am

≫ Next: Hardware Compat

≪ Previous: Gen 10 - Device Driver

Error: 503 Service Unavailable

Our apologies. We are unable to retrieve your Passport profile because HPE Passport service is temporarily unavailable.

Please try again by reloading this page. The situation has been reported to the support team.

it's about 8 hours that i try to download from spp but ....

someone can help !

rgs livio.

↧

Hardware Compat

September 20, 2018, 11:18 am

≫ Next: Array Expand Issue

≪ Previous: what happe this 20/09/2018 at hpe portal ?

I have a HP Proliant ML370 G5 Server that I am building on

I wonder if the Intel Xeon X5492 Processor Works on this server or if I am limited to the X5470 Cpu

allso Can I Bios Raid 2X HP Smart Array P800 to A Raid 50?

↧

Array Expand Issue

September 23, 2018, 12:17 am

≫ Next: kmod-hpsa can not be installed

≪ Previous: Hardware Compat

Dears,

We have HP DL 180 G9 with HPE H240 HBA Riad Card.
Current configuration contains below

Array A - 1 Logical Drive Raid -1 with 2 identical SAS 300Gb drive

Array B - 1 Logical Dirve - Raid - 5 with 4 Identical SAS 600Gb drive with 1 HDD being Deicated Spare

we are now trying to expnad the Array B for that we have purchased same identical 600Gb drive and connected and visible under Unassined drives section.

we are unable to find the option on expaning the logical drive for Array 2 using the HP SMart Storage Administrator software.

please help us on how to do it.

Thanks

CPITADMIN

↧

kmod-hpsa can not be installed

September 12, 2018, 11:12 am

≫ Next: Array Controller

≪ Previous: Array Expand Issue

Hi,

I wanted to install kmod-hpsa on CloudLinux (CentOS 7.2/RHEL7), because it is needed for hp-snmp-agents to work. ((check_ilo2): Error Code (1) "CPQCIDRV driver is not loaded.")

The server is a ML310e Gen 8

This is what I got: Error:

Package: kmod-hpsa-3.4.20-136.rhel7u5.x86_64 (HP-spp)
Requires: kernel(__x86_indirect_thunk_rax) = 0x2ea2c95c
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
~# uname -r
3.10.0-714.10.2.lve1.5.17.1.el7.x86_64

Please, send me suggestions how to solve this.

↧

Array Controller

September 24, 2018, 1:11 am

≫ Next: ML350 Gen9 High CPU Fan Speed

≪ Previous: kmod-hpsa can not be installed

I have Hp server Dl180 g9 with 6X1TR storage and i want to use this server as (SQLERVER) what is the best way to partshion this server which Raid feature i can use

↧

ML350 Gen9 High CPU Fan Speed

September 24, 2018, 7:08 am

≫ Next: CentOS 7.5 Installation on a HPE DL 380 Gen9 Server.

≪ Previous: Array Controller

Hi, i have one ML350 Gen9 Server on a small shop and we are facing high Fan speed (and noise). Every few minutes the server's fans are running at high speed making the people working there feeling discomfortable.

The temperature of the system is relative low (from 23 to 46 degrees Celcious and the systems firmware is 2018-03 . I 'm aware of this article

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00008294es_es

but we have the newest controller firmware (6.60).

Any advice?

Thank you in advance, George

↧

CentOS 7.5 Installation on a HPE DL 380 Gen9 Server.

September 24, 2018, 10:53 am

≫ Next: dl370 g6 heatsink latches

≪ Previous: ML350 Gen9 High CPU Fan Speed

Hi,

Anyone can help on, CentOS 7.5 Installation on a HPE DL 380 Gen9 Server. I cann't install it due to display video issue.

Thanks.

↧

dl370 g6 heatsink latches

September 24, 2018, 4:18 pm

≫ Next: Automated Storage Manager error

≪ Previous: CentOS 7.5 Installation on a HPE DL 380 Gen9 Server.

Hi, how do i find heatsink latches for dl370 g6? :(

↧

Automated Storage Manager error

September 25, 2018, 8:53 am

≫ Next: What cable to connect a P440 to a dual-SAS 8SFF?

≪ Previous: dl370 g6 heatsink latches

I have a ProLiant DL320s G1 system on Windows Server 2003 x86. About 3 weeks ago, our backups started failing on this server. In researching, it appears because shadow copies cannot be performed. While looking in the event logs and Automated Storage manager, I'm getting an error: Discovery: Failed.

Also, I'm getting the error: Error loading iSCSI network state.

Also, Error loading iSCSI preferred network setting.

Nothing has changed on our systems. I haven't been able to figure out what is causing the problem.

I launched Automated Storage Manager. All connections seem to be working but the error continues in the program Discovery Failed. I launched the Microsoft iSCSI initiator. Nothing seems to be out of the ordinary. I'm not sure what else to do to fix this. We need backups operational again.

Any suggestions would be very helpful.

Thanks!

Charlie

↧

What cable to connect a P440 to a dual-SAS 8SFF?

September 25, 2018, 10:07 am

≫ Next: HP 516806-001 for IPMI, license needed?

≪ Previous: Automated Storage Manager error

ML350 Gen9, new P440 controller (726821-B21), and an 8SFF drive cage with a pair of internal mini-SAS ports on the back. The P440 has a single port, some kind of double-wide SAS, and we can't figure out what cable we need to connect the two. We've come up with a couple potential part numbers for the cable by searching various combinations of "P440 8sff sas": 777418-B21, 774619-B21, 783009-B21. But since none of the pictures are accurate, and the descriptions tend to not describe the cable, we're not sure whether they connect the P440 to two mini-SAS connectors or just one.

↧