↧
Issues with 488069-B21 (Optional HP TPM Module) and Update KB4494440
↧
snmpwalk timeout on CentOS 7.5 in DL380 Gen10
I have wantted to retrieve the hardware status via snmpwalk.
I had constructed SMA using the below user guide. However, I couldn't retrieve that.
Are there any other procedure needed?
https://h50146.www5.hpe.com/lib/products/servers/proliant/manuals/880740-191_ja.pdf
Server : DL380 Gen10 (iLO5)
OS : CentOS 7.5
# rpm -ivh amsd-1.4.0-3066.82.rhel7.x86_64.rpm
# vi /etc/snmp/snmpd.conf
add "master agentx"
# systemctl start smad_rev
# systemctl start amsd_rev
# systemctl start snmpd
# snmpwalk -O vq -v 2c -c private localhost .1.3.6.1.4.1.232.6.2.6.4
I received the following message.
Timeout: No Response from localhost
↧
↧
solved using another driver, this message can be delete
solved using another driver, message can be delete
↧
1797 Drive array - array accelerator data backup previously failed
DL360e gen8, Dynamic smart array B320i RAID controller, ACU diagnostics report indicates 'cache is permanently disabled' error.
Boot-time prompts indicate '1797 Drive array - array accelerator data backup previously failed - array accelerator is disabled'. Kindly any ways to fix this?
↧
Error with option rom post error
Hello,
I have a problem with the boot with proliant 380 Gen9, the error message is :Option Rom POST Error: 1716-Slot 0 Drive Arrey.
Thank youImage may be NSFW.
Clik here to view.
↧
↧
Does DL20G9 4SFF support SSD HDD?
There 4 HDD slot on DL20G9 4SFF, does it support 3rd party SATA SSD HDD?
I install four 3rd party SATA SSD HDD, but find none on the RAID configuration page?
↧
ESXi 6 complains that P410i has outdated firmware while it is at the latest available version?
Hi everyone,
Obvisouly posting to VM Ware forums didn't produce any substantive feedback so here I am at the HPE side of the house posing the exact same question:
I noticed this on an HP ProLiant ML 380 G7 server running the proper OEM specialized ISO image VMware-ESXi-6.0.0-Update3-9313334-HPE-preGen9-600.9.8.5.4-Sep2018.iso (You are running HPE Customized Image ESXi 6.0.0 Update 3 version 600.9.8.5 released on September 2018 and based on ESXi 6.0.0 Update 3 Vmkernel Release Build 9313334)
HP Serial Attached SCSI Disk shows as "...some functionality might be degraded" even though there's no hardware failure and file system health is good too? I've confirmed that the bare metal has no errors and that the disk array is NOT running in recovery mode due to disk failure or any other cause. It appears that ESXi isn't happy with the firmware level but I am running the latest firmware available from HPE for this Smart Array P410i Controller:
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
↧
Reduce fan noise PCIe on DL380 G7
Hello everyone,
I have recently buy a DL380 G7 with 32go ram, 2*X5660, SSD... I use this as low cost Workstation.
This server is very quiet, when there are no PCIe card.
When I put USB 3.0 extension card on PCIe (it's work find) or other card, the server increase fan speed and make a lot of noise.
I don't find how I can disabled this parameters in BIOS.
The server is up to date, latest iLO 3, BIOS
Can you help me?
Thanks,
Sorry for my english, i'm french ;)
↧
PXE Install SPP from network folder
Is there a way to PXE install SPP offline using a network folder instead of iso? All the documents and community discussions shows using the ISO, but we have setup our PXE server install extracted ISOs.
↧
↧
Biggest storage size
hi everyone,
What is the biggest storage size that is possible to fit in a single DL380.
assuming a minimal RAID 5 to secure data.
thanks for your input. cheer.
↧
HP Proliant G8 not communicating
We have a Proliant G8 server which is pinging is success with other server but when trying to do Remote access its not communicating, checked almost all possible issuess but nothing confiugred, remote is alos enabled still same issue
↧
fs/pstore file not created in HPE DL360 Gen9 Server when Kernel Panic occurs
Hi,
We are using HPE DL360 Gen9/10 servers in our lab. We notice that, server uptime is getting changed (Server restart happened). In the ILO logs, We are seeing below events.
Embedded Flash/SD-CARD restarted.
Server Power Restored.
Server reset.
To root cause the issue, we have enabled fs/pstore in the server. But, unfortunately nothing is logged in pstore file when crash or kernel panic happens in the server. This has been tried by generatinjg sample kernel panics in the server which reboots server. After that, no logs been created in the pstore.
Can you somebody help here, how to capture kernel panic messages or crashes in the server ?
Your help is really appreciated!!
Thanks
Sekhar Karimbedu
↧
ML350e Gen8 v2 - Server won't boot , red internal led flashing - could't find meaning in docs
Hi eveybody and thanks for the time you may spend reading my problem! Here I go:
Proliant ML350e Gen8 v2, with Windows Server2016, just changed it's phisical location and it doess't boot - can't even enter in BIOS - no POST screen shown.
Everything seems normal, except an internal red light blinking and no signal on screen. All front indicator are fine. I attach a picture showing red led location on motherboard.
Image may be NSFW.
Clik here to view.
Thanks in advance!
↧
↧
ML30 Gen9 E3-1220v6 NHP EU: is it possible to swap drives with higher capacity in Raid 5?
Dear HP support and forum readers,
I have a ML30 Gen9 E3-1220v6 server in raid 5 config with 4x4 TB drives. Which I would like to replace with 4x8 TB.
Is this possible with the built-in B140i array controller in terms of compatibility? And what would be the most efficient way to replace the drives with no (or the least amount of) downtime?
I'm curious to hear your thoughts about this.
Thanks in advance!
↧
New iLO4 2.70 - Issue w/ Remote ISO via HTML5 Console
I'm trying to apply an SPP to a DL580 Gen9 via the new HTML5 console in iLO4 2.70. It seems the ISO is being unmounted before SPP is fully loaded. The stand-alone Windows console works fine. Any ideas?
↧
HP ILO 4 QUALYS Vulnerability
Howdy has anyone found that qualys is detecting a vulnerability on the HP ILO 4 cards on Proliant DL380 GEN 9 servers that is due to having an outdated version of jquery running on the ILO?
The Qualys QID is 13477 and the vulnerability reported is that there is an outdated version of Jquery 1.x or 2.x found on the ILO cards.I am running the latest version of firmware which is 2.62.
HPE support hasn't been able to provide any information on this issue or even verify that jquery is used on the cards or if there is a way to disable jquery.
↧
ESXi 6.5 with 535T (broadcom) and Jumbo frames issues
We have 3 x DL360 Gen 10 servers. Each with 1x 535T & 1x 562FLR-T. All firmwares are up to date.
Used the HPE Custom Gen9PLus 6.5U2 iso and also esxi patch 10884925
We use 2nd port on each 10Gb adapter to connect to SAN network using Sfotware iSCSI adapter.
Network Configuration is validated with Nimble Storage support and we are finding the the 535T(Broadcom) vmkernel port looses/drops packets. The nic's & SAN and switches have Jumbo frames enabled.
The Intel 562FLR-T works perfectly. and no issues or dropped packes.
All Connected to same switch., Switch had STP disabled on SAN ports and Flow control enable.
Updated the Broadcom driver to the latest from Vmware.com too and still had the issue.
https://my.vmware.com/web/vmware/details?downloadGroup=DT-ESXI65-BROADCOM-BNXTNET-21401900&productId=614
I am guessing driver issue or bug.
Testing using this command where VMk2 is the kernetl port bound only to the 535T port 2 vmnic.
vmkping -I vmk2 -s 8000 -d 192.168.130.240 -c 240
Also
vmkping -I vmk2 -s 1400 -d 192.168.130.240 -c 240 (smaller frame size)
↧
↧
RAID Level in HP PorLiant DL380 windows server 2012 r2
How can I see my RAID level configured in HP PorLiant DL380 windows server 2012 r2 OS? i checked in the disk management but it is not showing the raid configuration.
↧
ESXi 6.0 host fails with a Purple Diagnostic Screen with error
Hi
I have HP ProLiant DL380 Gen9.
Image may be NSFW.
Clik here to view.
Sometimes server crashes, and I got several purple screen on our running production ESXi 6.0.0 server.
Image may be NSFW.
Clik here to view.
Can you help me with that?
what causes this and what is the troubleshoot?
Thanks
↧
End of Serviceable Life Dates for HP DL360 Gen 9 and HP DL380 Gen 8
Hi All,
Wondering if an HPE employee could help me find the end of serviceable life for the following two servers? Unable to find this anywhere on the internet or the HP website!
HP DL360 Gen 9
HP DL380 Gen 8
Many thanks in advance!
Ian
↧