Quantcast
Channel: ProLiant Servers (ML,DL,SL) topics
Viewing all 10362 articles
Browse latest View live
↧

Upgrade DP380e Gen8

September 24, 2019, 11:20 am
$
0
0

Hello, I want to upgrade HP ProLiant DL380e Gen8 server and I need to check compatibility. PN is: 687570-425

Now server use:
CPU: Intel(R) Xeon(R) CPU E5-2407 0 @ 2.20GHz - 4/4 cores; 4 threads
RAM: 3x 4GB DDR3 1.35V PN: 647647-071

I want to buy second cpu, and add more RAM. So Can I buy Intel Xeon E5-2430 v2 6-Core 2.50 GHz 15M SmartCache SR1AH and two RAMs HP 8 GB 2Rx4 PC3L-10600R DDR3L-1333 RDIMM 647650-071 ? Will it be compatible? Should I buy anything else like HP Heatsink ProLiant DL380e Gen8 677090-001 ?

Should I know someting like compatibility, downclocking or something like that? I want to have more powerfull server for Hyper-V replica because I buy new DL360 Gen10 with 2 CPUs and 64GB RAM. Replica should be used only for 4 VM's. 

 

Thank you for any advice

↧
Search

HP DL20 Gen10 Supported M2 Hardware

September 24, 2019, 12:24 pm
$
0
0

Hi there,

i search since arround an hour, but i didn't found any answer. So i feel free to ask here in the support forum and hope to get an answer.

What kind of M2 is supported in the DL20 internal Slot? Just for Information, it's for Homeuse, so it's not critical.

I tried to use an Transcend SATA M2 but those didn't get regnoized. So i think M2 PCIe should be the correct way?
Or is there a signature lock that there is only hp branded hardware supported?

Thanks in advance
Manuel

 

 

↧
↧

DL360p Gen8 running new Linux OS?

September 25, 2019, 12:24 pm
$
0
0

I have a ProLiant DL360p Gen8 that I'm repurposing that I'd like to run Linux with a Redis and a few other services. I was looking first at Ubuntu but the compatibility matrix suggests that the latest supported version is Ubuntu 14.04 which after digging seems like it only supports Redis 2.8.4 which I think is a bit old. 

Is it possible to run a newer Linux OS such as Ubuntu 18 on this hardware even if things like the SmartArray are not supported? Is there more to consider than just the drives? 

↧

new server dl380, " no controllers detect "

September 25, 2019, 7:50 am
$
0
0

I have new server dl380, but I face a problem with " no controllers detect ".Can you help ? How to solve the problem

↧

HPE Proliant Firmwares Update by Intelligent Provisioning

September 25, 2019, 9:46 am
$
0
0

Hi guys,

I have a little doubt, I have an HPE Proliant DL380 G10 Server with Firmwares version 2017.

So, I´m updating firmwares with Intelligent Provisioning, but, when I started Update Job, the page loading for a long time.

The Update Job has been loading for 18 hrs, I have read that is not recomended to restart the server when it´s updating.

  1. Could you give me an advice?
  2. Is it normal for it to take so long?

Thanks for your recomendations,

Regards. 

↧
↧

Monitoring Ethernet adapters on Proliant DL380 G9 through SNMP

September 26, 2019, 2:34 am
$
0
0

Dear Community,

My task is to monitor the status of the Ethernet adapters on board of a Proliant DL380 G9 by means of SNMP. I'm not an expert. Could anyone tell what should I do (which OID to use, what should be enabled on the srver)? Consider the server is running Windows 2016 Standard Edition.

Thanks in advance for any reply.

Stefano

↧

Partiioning disk after RAID 1 setup using smartarray e208ip smartArray controller

September 26, 2019, 3:53 am
$
0
0

Hi All,

I have 4 disks, 2 of 900Go in RAID1 , 2 of 4To in RAID 1 also.

What i want is to partition the 900Go and have one partition of 120Go for OS install and the 780 for datas.

The issue is that i could make the RAID 1 setup and installed the system (windows server 2019). After install i can not shrink the 900Go to what i want it just allow to shrink to the half disk space.

Can someone help with this ?

↧

DL380 Gen10 POST Sequence

September 26, 2019, 8:52 am
$
0
0

HI There,

We just got new DL380 Gen10 and we will be supporting them as well. IF we do not have iLO access to the server, is there way we can see the POST sequence on full screen rather than on thumbnail.

Please advise.

Thank you,

↧
Search

HPE ML30 GEN10 can boot the windows server 2016 std (IP - express os install)

September 26, 2019, 9:28 pm
$
0
0
the server was installed with the latest firmware (ROM,iLO,IP, SPP)
 
x:\windows\system32>hpev CQTESS

Error: deleting EV CQTESS
.
.
X:\windows\system32>exit /b 0
.
X:\windows\system32>

i got stuck with this, and the installation stops.

thanks in advance...

↧
↧

ProLiant ML10

September 25, 2019, 11:53 pm
$
0
0

Hi Can you help me ? how to restore ProLiant ML10 installation

↧

HPE ML30 GEN10 can not install the windows server 2016 std (IP - express os install)

September 27, 2019, 12:27 am
$
0
0
Hi everyone,
 
ML30 GEN10 cannot install the windows server 2016 std Intelligent Provisioning - express os install
The server was installed with the latest firmware (ROM,iLO,IP, SPP)
 
x:\windows\system32>hpev CQTESS

Error: deleting EV CQTESS
.
.
X:\windows\system32>exit /b 0
.
X:\windows\system32>

i got stuck with this, and the installation stops.

thanks in advance...

↧

BSOD With 2016 STD on Proliant ML350 Gen10 When Creating New Array.

September 27, 2019, 1:57 am
$
0
0

Hi,

I seem to have an issue with creating a new array (Logical Drive) while Windows 2016 STD is running.

I installed 2016 STD on this new server,

The server has 2 SSD drives so I set one as logical for the install and then tried to set the second as another logical while the server was running.

I used the HPE Smart Storage Administrator (which I downloaded from HP Support site)

I select the spare physical drive and create an array and all seems fine until  BSOD.

After this BSOD it renders the server unbootable.

With it being a new server I can afford to mess about with it so I tried the exercise again and I get BSDO every time.

Is anyone else having this issue.

Kind Regards

 

↧

SNMP ILO SMA & AMS

September 27, 2019, 7:25 am
$
0
0

Hi,

I have setup SNMP monitoring for my Prolaint ML350 but in my SMA logfile i am getting the following errors:

09/27/2019 15:19:38.816, [Error ], |Thread_ListenToSnmpQuery|, Failed to get response from iLO. Responded with all-zero to caller.
09/27/2019 15:19:48.817, [Error ], |Query_iLO|, iLO communication error encountered! Restarting connection.

I have installed MIB browser and cannot see the HPE ILO reporting back when i run a WALK

I have also re-installed Agentless Management Service for Windows X64.

No info anywhere in regards to this issue.

Thanks in advance,

James

 

↧
↧

Fans regulation on HP Proliant DL160 G6

September 27, 2019, 10:38 am
$
0
0

Hello everyone!
Can I somehow control speed of fans on my hp proliant dl160 g6 without iLO? I mean, is it possible to set exact value of rpm to each fan?
HP System BIOS - 033 (07/01/2013). BMC Firmware version 04.26 (May/08/2013). BMC SDR Version: 2.18.1.34

↧

Unable to install any Operating System on HPE ProLiant ML10 Gen9

September 27, 2019, 4:08 pm
$
0
0

I have been unable to install any OS on this server. 

It will bring up a grub or choice menu, but hangs after that. I just tried the ClearOS install, downloaded from the HPE link to ClearOS, it goes as far as the choice on what to do, then confirm, then a black screen.

On a Windows CD, it goes to where it starts to load, then black screen.

I downloaded the HPIP271.2019_0102.140.iso, after choosing "Intelligent Provisioning for Gen9 Servers" on the menu, will only go as far as: 
"Loading kernel"
"Loading initial ramdisk"
Hangs there, goes no further.

↧
Search

AHS Log Stuck on downloading

September 27, 2019, 7:39 pm
$
0
0

Good Evening, 

I am having issues downloading an AHS log from a Proliant SL4540.  When attempting to created the download, I cannot fill in the fields.  I do see a message on the screen saying that "The AHS is downloading....", yet I didn't\couldn't proceed with the download.  

The Information page shows the ILO health as degraded and the Diagnositics shows "Controller firmware revision 2.10.00 NAND read failure " for the embedded flash.  I am tempted to reset the ILO but not sure if that is the best route to take first 

 

 

↧

DL380 G8 Reboot automatically after using iLo4 mount HP SPP. also receiving 261 after BIOS upgrade

September 28, 2019, 1:59 pm
$
0
0

Hi Please help me , we have two DL380P G8, one of the G8 can not using iLo4 mount SPP ISO doing the update. 

I have download the latest G8.1 SPP and after system boot to the Image, wait for a little while with black screen, the server reboot themself. but on anohter G8 works perfect.  So I did manualy update, start from iLO updated from 1.2 to 2.7, and BIOS, but after I flashed to the new Bios (Jun272019). everytime the system booting is shows 261 SPS requires update. I also upated my power management to 3.3(I think its the latest). but it still shows 261 message. 

when I login in to iLo from system info firmware section, my Sserver Platform Service Firmware version shows 0.0.0.0(my other G8 shows2.7***). 

I did reset iLO, reset the server, but still got this message. my CPUs are E5 2650V0.

Could you please advice me what I can do fix the iLo Mounting SPP issue and fix the 261 message. 

Thanks inadvance. 

↧
↧

Onboard HP SSA Loading - Stuck on HP logo

September 29, 2019, 6:08 am
$
0
0

Hi

I have a HP DL360 G9 server with HP P440AR raid controller. Raid controller is running firmware 1.18 and BIOS is running on ROM P89.

When trying to get into the onboard HP SSA (F9) or Intelligent Provisioning (Press F10), the embedded firefox browser launches and the HP logo appears - it does not proceed beyond that.

I launched a Virtual Serial console session to view the error messages and "error: no such device: HPEZCD201." appeared - I googled this and it seemed related to the server unable to output dedicated GPU cards. However this issue occurs with both a physical monitor connected and when trying with iLO remote console.

I have also tried multiple screen resolutions.

ANy ideas on this please?

Many thanks

↧

DL360 Gen10 front USB & VGA

September 29, 2019, 7:35 am
$
0
0

i have a problem with the front USB and VGA ports.

when i attach a keboard and monitor they are not functioning.

the module was replaced but still the same symptom.

do you have a solution for that.

thanks

.

 

↧

GPU on a Proliant Gen7

September 29, 2019, 10:36 am
$
0
0

Hello

 

I'm an student in informatique. I bought two years ago a DL380Gen7 with the advices of a teacher I had. I moved shool, abandon my project to turn the server into a workstation.

I recently came back to this, two years laters. And I'm now trying to put a GTX 1650 in it. I have the card, powered by a special cable hooked on the SAS power connector B, plug in a riser plugge in the second riser connector

(see the user guide : https://content.etilize.com/User-Manual/1046138544.pdf#%5B%7B%22num%22%3A535%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C48%2C744%2C0%5D )

My issue here, is that when I install everything, nothing show up. The server start, apparently detect a GPU because the integrated graphic chipset doesn't work, but the GPU doesn't work either. Furthermore, the fan of the GPU doesn't spine.

I guess that could come from the power supplie, with is a 460W (so may be a bit short ?) but I'm a bit unsure on this. iLO 3 firmware is from 2015

I anyone could give me a tip before buying anything I would really appreciate it

 

Thanks in advance, have a good day

PS : not a native speaker, sorry if I'm unclear

↧
Viewing all 10362 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>