Quantcast
Channel: ProLiant Servers (ML,DL,SL) topics
Viewing all 10362 articles
Browse latest View live
↧

ProLiant DL380G6 - error 640006 and POST Error 1779

August 27, 2014, 10:30 pm
$
0
0

Hi there,

we have a ProLiant DL380G6,  Logical drive 2 is a Raid5 consisting of 3 hard drives  (3, 4, and 5).

 

The HP Diagnose tool has indicated that drive 4 has failed (error 640006) and recommends replacement.

 

We have hot swapped the drive 4 out with a new hard drive, but Logical drive 2 has disappeared, POST Error 1779-Drive array Controller dects replacement drives came up.

 

 

We put back the original hard drive and re-enabled array config the system is running fine now, but error 640006 still comes up when we run HP Diagnoses, I am a bit nervous in swapping it out and same thing happens again.

 

I am just wondering why has this occurred? We have replaced hard drive before and have never lost the logical drive.  Can anyone shed some light on this please?

 

Cheers

Jason

 

↧
Search

ML370G5 Shutting down and not restart

August 28, 2014, 12:41 am
$
0
0

hi people, i have a problem with this server.

 

From few days we find the server OFF

 

When we try to start with the power button, the server start but after 1 second, all led blink and then shut down. 

 

Casually i open the case and the the server restart correctly.

 

But in the server room we have air conditioned and the server is connected correctly to UPS.

 

Wher's the problem?

↧
↧

iLO4 1.51 scripting, can't enable syslog

August 28, 2014, 1:26 am
$
0
0

Hi,

 

I'm trying to enable syslog on a iLO4 1.51 from command line, using hponcfg v4.2.0 under CentOS 6.5.

 

I've successfully configured REMOTE_SYSLOG_SERVER_ADDRESS and REMOTE_SYSLOG_PORT, but I still can't switch REMOTE_SYSLOG_ENABLE to Y :

 

# cat << EOF |hponcfg -i> <RIBCL VERSION="2.0">>   <LOGIN USER_LOGIN="xxx" PASSWORD="xxx">>     <RIB_INFO MODE="write" >>       <MOD_GLOBAL_SETTINGS>>         <REMOTE_SYSLOG_ENABLE VALUE="Y" />>       </MOD_GLOBAL_SETTINGS>>     </RIB_INFO>>   </LOGIN>> </RIBCL>> EOF
HP Lights-Out Online Configuration utility
Version 4.2.0 Date 6/10/2013 (c) Hewlett-Packard Company, 2013
Firmware Revision = 1.51 Device type = iLO 4 Driver name = hpilo</-- ERROR :      STATUS= 0x00BE
     MESSAGE= Tags for Remote Syslog cannot be empty. -->
Script failed 
#

 

And here's the full GET_GLOBAL_SETTINGS output :

 

<GET_GLOBAL_SETTINGS><!-- A session timeout value of zero means that the timeout is set to infinite. --><SESSION_TIMEOUT VALUE="0"/><ILO_FUNCT_ENABLED VALUE="Y"/><F8_PROMPT_ENABLED VALUE="Y"/><F8_LOGIN_REQUIRED VALUE="N"/><HTTPS_PORT VALUE="443"/><HTTP_PORT VALUE="80"/><REMOTE_CONSOLE_PORT VALUE="17990"/><VIRTUAL_MEDIA_PORT VALUE="17988"/><SNMP_ACCESS_ENABLED VALUE="Y"/><SNMP_PORT VALUE="161"/><SNMP_TRAP_PORT VALUE="162"/><SSH_PORT VALUE="22"/><SSH_STATUS VALUE="Y"/><SERIAL_CLI_STATUS VALUE="Enabled-Authentication Required"/><SERIAL_CLI_SPEED VALUE="115200"/><VSP_LOG_ENABLE VALUE="Y"/><MIN_PASSWORD VALUE="8"/><AUTHENTICATION_FAILURE_LOGGING VALUE="Enabled-every 3rd failure"/><LOCK_CONFIGURATION VALUE="N"/><RBSU_POST_IP VALUE="Y"/><ENFORCE_AES VALUE="N"/><IPMI_DCMI_OVER_LAN_ENABLED VALUE="Y"/><REMOTE_SYSLOG_ENABLE VALUE="N"/><REMOTE_SYSLOG_PORT VALUE="514"/><REMOTE_SYSLOG_SERVER_ADDRESS VALUE="log.mydomain.tld"/><ALERTMAIL_ENABLE VALUE="N"/><ALERTMAIL_EMAIL_ADDRESS VALUE=""/><ALERTMAIL_SENDER_DOMAIN VALUE=""/><ALERTMAIL_SMTP_PORT VALUE="25"/><ALERTMAIL_SMTP_SERVER VALUE=""/><PROPAGATE_TIME_TO_HOST VALUE="N"/></GET_GLOBAL_SETTINGS>

 

Does anyone know what I'm missing ?

 

Cheers,

↧

Can't update iLo2 1.82 to 2.25

August 28, 2014, 2:47 am
$
0
0

on DL380G5, with massage -

The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.

 

... and iLo2 log message :  Firmware upgrade via web page failed. -  

When try update via webpage

 

↧

NIC Insight Notifications

August 28, 2014, 6:11 am
$
0
0

I'm setting up a few new servers.

 

My existing servers are windows 2008, use HP's Nic Teaming software, and if a connection fails for any reason (cable unplugged, nic failure, port on switch, etc), I get a notification from Insight that its degraded.

 

Now on the new servers, Windows 2012, using MS NIC Teaming and the team is for Hyper-V so it is made not available to the host.  Now I get no notifications.  If one is unplugged, the network adapter shows as unplugged in Windows, but the SMH has no info on it under Network Adapters (my guess is becuase it is being segragated from the host by Hyper-V), although it does show up in the IML that they are down.  I can confirm Event Notification is working otherwise as i'm getting notifications about power supply redundancy, iLo NIC status, etc.

 

Has anyone seen a solution or workaround for this?  I can't find anything in MS NIC teaming that allows for notification. 

↧
↧

Riser dl380p g8

August 28, 2014, 6:33 am
$
0
0

I recently purchased 2 proliant dl380p g8. They come with an internal PCIe riser. Does HP sell\support an internal  PCI riser for this model. I have some older cards I want to install in it.

↧

DL180, vSphere triggers strange alarm: Host storage status

August 29, 2014, 7:54 am
$
0
0

Hey folks,

 

Early in the morning we noticed an alarm on one of our hosts; Host storage status.

 

Sensors show me this (the forum does not allow me to insert the screenshot): 

 

(here the disks that are fine)

and then...

 

- Disk 5 on HPSA1 : Port 2I Box 1 Bay 5 : 0GB : Data Disk : Disk Error
- Disk 6 on HPSA1 : Port 2I Box 1 Bay 6 : 0GB : Data Disk : Disk Error

- HP Smart Array P410 Controller: Slot 1 : HPAS1

- Logical Volume 1 on HPSA1 : RAID 1 + 0 : 931GB : Disk 1,2,3,4
- Logical Volume 2 on HPSA2 : RAID 1 :: 1862GB : Disk 5,6 : Failed

 

The strange fact here is that this host does not have any physical disk on those bays (5 and 6) and never had.

No amber light on current disks on bays 1, 2, 3 and 4 neither.

 

Server information: 

- ESXi 5.1.0 , 799733 -

- Image profile: HP-ESXi-5.1.0-standard-iso

- Hardware: HP ProLiant DL180 G6

- Managed by vCenter and non part of a cluster

- has no iLO

- Current Offline bundle: 1.3.5

 

Link to the original thread on VMware Community Forums (the mentioned screenshot is shown here):

https://communities.vmware.com/thread/488270

 

Does anyone have any clue why this could be happening? Why this alarm could be triggered?

Thanks in advance.

 

 

↧

HP Proliant ML350 G5

August 29, 2014, 8:50 am
$
0
0

Hello! The problem with the battery Cashe module after replacing the battery on HP Proliant ML 350 G5. Cache Status: Enabled but not currently active due to transformation. After rebooting the server the status of the battery approx 2-3 days, then the message again "Enabled, but not currently active due to transformation." What could be the problem? Thank you in advance for your reply

↧
Search

DL320E V2 Power supply fan loud

August 29, 2014, 10:46 am
$
0
0

Ive seen the issues with the case fans.  My case fans run at 6%.  My PSU fan sounds like a jet turbine engine.  Any help?

↧
↧

Windows Server 2008 does not recognize new 1 TB disks, but embedded raid controller did.

August 30, 2014, 12:22 am
$
0
0

Hi all,

 

I have a HP proliant ml310 g5 server with two 250 GB sata disks (raid1 – embedded raid controller). More free disk space is required. So I added two 1 TB SATA hotadd disks. In the embedded raid controller bios I configured also a raid 1. But my problem is now that Windows Server 2008 does not show me any new disk. Not even the HP Storage Manager shows me a new disk!

 

I updated all drivers and firmware with current SPP. I tried also a other HP disks, but with no success.

 

Has anyone a tipp for me?

 

Thank you in advance.

 

Best wishes

Klamauck

↧

HP Intelligent Prov. - Error Message

August 30, 2014, 5:01 am
$
0
0

Hi,

i will setup a ML350p G8 with Windows 2008 R2. With Intelligent Provision i get the error message: Windows cannot read the "Product Key" setting from the unattend answer file.

I have found the solution to install the OS manually. After a manually installation there is no HP-Software on the Server (ACU, etc.) and no drivers (Graphiccard, etc.).

I dont find any drivers and software from HP.

 

I want the SmartStart back! :-)

 

Thanks for any help.

 

Markus

↧

Converting to RAID on ML 330

August 30, 2014, 5:54 pm
$
0
0

I have a client who has a ML 330 and it only had one drive in it.  Of course it is full and they have asked me to replace the drive with a bigger one.  Seeing that there was no RAID on the machine initially, I opted to set up RAID 0+1 with the new drives.  I was able to set up the RAID array and image the original drive to the RAID array, however it won't boot because Windows 2008R2 did not have the drivers for the RAID controller.  I was able to convert back to the standard SATA controller and booted to the drive and was able to add the drivers for the B110i controller and then switch back to the RAID controller, however it still won't boot.  Any suggestions as to how I can get this to successfully boot using the RAID controller?

↧

Drive detection Problem !!

August 31, 2014, 9:44 pm
$
0
0

Hi,
In ML370 G2 server, only one disk drive is not detected by the OS. The server has a drive cage of six hard drives. Drive cage si also replaced with the new one, but still the drive is not detected. Also no RIAD is configured, then, i test the hard drive, by swapping the two hard drives. After swapping the hard drives, again one is detected and other not. It means hard drive didn't have any problem...........Plz guide me what can i do next !!

 

 

P.S. This thread has been moved Disk to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

↧
↧

RAID 6 OS issues on DL380

August 31, 2014, 9:47 pm
$
0
0

I have a friend that has the issues i am about to describe... A DL380 G5 with 8 HDDs and smart arry P410 was configured with ONLY RAID6 for all the 8 drives with 4 logical volumes. The OS is win2k3. One day, the users couldn't connect and when the sys admin got to the server room, he only saw on the screen.. "a disk read error occurred". He inserted the HP smartstart CD and saw that two of the drives have failed and required to be replaced. Because it was RAID6, he replaced the 2 drives and the rebuilding process started which took a long time like 16hrs hrs to complete. After the completion, the OS wasn't still coming up, so he decided if he could use the bootable OS to repair the OS on the server but the bootable OS CD wasn't booting. The only CD that boots on the server is the smartstart CD. He now decided to use the smartstart CD to install OS on the logical Volume1 since he is sure that is where the win2k3 OS was. After loading the smartstart CD and about to start the process of re-installing the OS, the C drive but got a message....." Ready to install" warning! Pressing "Next" will install the selected OS and will reset all drives to a freshly installed state. data currently on this server will be lost-- this is normal when installing OS."    Now the question is this.... How can this OS be repaired or be re-installed without losing the data on the Drives apart from the volume that has OS which is the logical volume1 ( drive C)???

 

P.S. This thread has been moved from Servers>General to  ProLiant Servers (ML,DL,SL). -HP Forum Moderator

↧

Firmware Upgrade disks

August 31, 2014, 9:50 pm
$
0
0

Hi all,

I have a Compaq DL380 g2. The server uses a Smart Array 5300 SCSI controller (FW version 2.32), with 4 disks of 18Gb connected to it.

When the server is rebooted and initializes it's smart array controller, a message appears in the POST screen --> SCSI Port 1: SCSI Disk 2 needs a firmware upgrade.

So I have checked the controller with insight manager, and found that the specified disk is another model disk then the others.

A few questions:
1. Does it matter if all disks in a Array are not from the same model.
2. What will happen if the disk is not upgraded with the latest firmware, Performance loss????

thanks for your time.
Remco

 

 

 

P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

↧
Search

ML350 G5 hard drives

August 31, 2014, 10:35 pm
$
0
0

Hello all, 

 

I have a Proliant ML350G5 server with a couple of failed 146GB SAS drives.  I'm thinking I would like to install maybe 1 or 2 2TB SATA drives but I cant see any SATA ports on the motherboard.  is there any way I can install SATA on this server?

 

Thnk you in advance, SS

↧

PCI-X riser board for DL380 G8

September 1, 2014, 12:33 am
$
0
0

Hello,

I have the NMS E1 board (AG 4040) with PCI bus and I want use one in DL380 G8 server.

But I can't find riser board PCI-E -> PCI-X for this server, while ifI'm not mistaken DL380 G5-G7 had such.

Is there PCI-X riser board for DK380 G8 server?

 

Thank you.

↧
↧

Maximum Size for Internal DL380 U320 SCSI

September 1, 2014, 12:56 am
$
0
0

Would anyone know how large a drive is supported on the DL380G3? I have heard both 147GB and 300GB but cannot find the answer in the HP knowledgebase.

Thanks,

frank

 

 

P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

↧

Change HD to DL 360

September 1, 2014, 1:06 am
$
0
0

Hi,

i have a Proliant DL360 with two 18Gb HD and a Smart Array controller Integrated.
The two HD are in MIRROR handled by Smart Arrey controller.

I must to substitute the two HD with other of 36Gb.

Can i umount one of 18Gb and substitute with one of 36Gb... wait for reconstruction and then umoun the second and substitute the second too???


Thank you in advance.
Darpet.

 

 

P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

↧

Disk for Proliant

September 1, 2014, 1:07 am
$
0
0

My company as a PROLIANT ML350 and we´ve purchased a HITACHI 73 Gb SCA Disk. What converter and cables will i need to install it on the server. We won´t use RAID, it will be just a simple drive.

Thank you.

P

 

 

P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

↧
Viewing all 10362 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>