Dear Forum Users, Yesterday I received a DL380 G7 in the post, it was working great, no problems at all. Today I go to setup more VM's in ESXI, to find out the server won't turn on. The power button has the orange light like normal, but the status LED is blinking red. If I unplug the power, and plug it back in, it will automatically turn on for 3 seconds, then turn off for 3, for about 10 cycles. After that if I press power it will do the same. I've already tried different psu, different cpus, different ram, different CMOS battery, different power cables, different raid cards, pretty much everything. I've been doing the usual googling for a few hours and nothings working. I've also tried reseeting the NVRAM, which fixed it for a few minutes, then back to this. Also, the component status panel has no lit LEDs.
↧