Proliant system board won't boot
My Proliant 591747-001 system board won't post after attempting to install an NVMe drive via PCIe x16 slot. It was working fine up until that point. I'm not getting any error codes at all, the CPU only...
View ArticleInstalling Server 2016 or 2016 with Intelligent Provisioning
Hi,Why is this always so difficult? It's been the same all the way since the G8's. You get a new server and the BIOS and firmware is completely out of date, so you use inteligent provisioning to...
View ArticleInstalling Server 2019 or 2016 with Intelligent Provisioning
Hi,Why is this always so difficult? It's been the same all the way since the G8's. You get a new server and the BIOS and firmware is completely out of date, so you use inteligent provisioning to...
View ArticleClik here to view.
DL380 G10 with the NVMe slot PCI Express Gen 3 SFF-8639 X4
HiI have a problem with NVMe SSD disks on esxi 6.5.I installed on the esxi the three vib as described by the intel...
View ArticleConrep Error WbemLocator
HelloI want to run the tool Conrep via WinPE. If I want to load or save a file, I get this error message "Error creating instance of WbemLocator Conrep return Code: 0"Conrep commandl: conrep -s -f...
View Article10 Gbit NIC not working on HPE DL380 Gen10
Hello,I'm trying to get a 10 Gbit Network Card working. But it is not possilbe. I have a new ProLiant DL380 Gen10 server with Windows Server 2016 Datacenter installed.First I tried to use a Intel fibre...
View ArticleHP ML350 G9 error 1627 - power supply solution not sufficient
Hey guys,i was installing a GPU in this server, but was unable due to lack of a power cable, but since then i´m unable to boot the server due to error "1627 power supply solution not sufficient",...
View ArticleDL380p Gen 8 No Display No Post Red System Health LED
Hey all, we have a DL380P 25-bay SFF that we have been trying to get going. It was operational when it was shut down (to the best of our knowledge), but since bringing it to our office it will not post...
View ArticleDl380 G7 Blinking Red Status LED
Dear Forum Users, Yesterday I received a DL380 G7 in the post, it was working great, no problems at all. Today I go to setup more VM's in ESXI, to find out the server won't turn on. The power button...
View ArticleML30 Gen10 NVMe drive only shows 1GB
Hello!According to the UEFI Setup, my Samsung 983 DCT M.2 NVMe drive is only showing 1GB available. The same happens in Windows Server 2019 setup. The drive works correctly in another computer (showing...
View ArticleWindows server 2019 install issues Dl20 gen10
Hi I'm having issues installing server 2019 on a new Dl20 g10. Intelligent provisioning will not load the iso and from windows installer it will not find raid.I've updated IP to 3.23 and the issue...
View ArticleHP proliant ML570 G4 无法进入系统
在完成备份后，重启服务器显示：attempting boot from Hard drive (C:)attempting boot from NICattempting boot from NICbroadcom UNDI PXE-2.1 V2.0.5copyright (c) 2000-2006 broadcom corporationcopyright (c) 1997-2000 intel...
View ArticleUpgrading CPU Issue on DL380 Gen9
Hello ;I have an issue with my sever when i adding a new CPU , the server boot with a black screen.there are no error on IML LOG aloso NO problem detected on AHS LOGI use the clear NVRAM and run the...
View ArticleInstall server 2019 desktop experience whit intelligent provisioning
HiIm trying to install server 2019 desktop experience whit intelligent provisioningBut the only choice I have is standard core I have upgraded ip to 3.22 but still no luckSo my only choice is a manual...
View ArticleMissing drivers to HP DL160 G9
Hi guys,I'm using HP DL160 G9 server with Matrox F2408 extenstion card. I had a problem with USB ports connected to Matrox box. After some time the USB ports were freezing and showed error Code 24...
View ArticleProLiant DL380 Gen8 12G controller
Good day all, Do you know if a DL380 and DL360 GEN8 server can run 12G drives (12G speed as well) I am aware of the need of a 12G PCI controller. (698529-B21)This is from HPE product Bulletin; NOTE:...
View ArticleILO show memory degarded
Hi, During status check, found server has a yellow warning light indication. Login to ILO and found the memory was degraded.
View ArticleDL380 G10 can not install WS2016
Hi all,I got trouble with installation Window server 2016 on DL380 G10 server.I was try to install ws2016 with iLO5 Remote Console .NET and to deploy it by F10 Intelligent Provisioning with HPE WS2016...
View Article