ML110 Gen 10 server with S100i raid controller not recognising drives
ML110 Gen 10 server with S100i raid controller not recognising drivesI'm trying to set up a brand new Ml110 Gen 10. Out the box it comes with S100i controller. I bought 4x HPE 900gb SAS SFF 512e...
View ArticleHP DL320 G6 power button
Hello to all . Help me find where to connect the button power switch please
View ArticleUnplanned server stop
Hello HP CompanyI have a prolific ML310 gen8 v2 hp server that suddenly shuts down.after observation and different tests I realize that the stop is not related to a concern for food.when booting the...
View ArticleDL380 G10 / RHEL Device Order
Hi, we just purchased a few DL380 G10 SFF 24 servers. It has the following controllers:E208i-a SR on the system board (RAID 1 for OS in the rear cage)E208i-p SR - Slot 1 driving front cage 1 (mixed...
View ArticleThe RIBCL subscription has failed.
We had a mainbord replaced in a server this week due to an issue with the embedded flash. Now I cannot get it to register properly with Insight Remote Support. It discovers the server, but I see the...
View ArticleDL380 Gen9 Problem with PLX PEX8112 chip
Hello,Our company is currently using the PLX PEX8112 based board in DL380 Gen8 workstations and planning to upgrade to DL380 Gen9 servers.. However, we noticed that the above card does not work with...
View Article2012 R2 rok standard license
Hello,we have a proliant dl380 gen9 server with a 2012 R2 rok standard license.We'd like to know if we can have 1 windows server instance running in the hardware, plus 1 hyper-v VM, with the same ROK...
View ArticleIs MicroServer Gen10 supported with SPP?
Hi,Is ProLiant MicroServer Gen10 Server supported with SPP?
View ArticleSmartArray options
Hi,We have DL185 G5 12 disk and DL180 G6 12 disk servers which are currently used for backup/archival purposes (hence the 100 series).Without going to too much expense (i.e. total server replacement)...
View ArticleUpgrading CPU Issue on DL380 Gen9
Hello ;I have an issue with my sever when i adding a new CPU , the server boot with a black screen.there are no error on IML LOG aloso NO problem detected on AHS LOGI use the clear NVRAM and run the...
View ArticleExtra power for my gpu ?
Hello people,I have a Proliant DL380 G6 and I want to build a GPU into it. To be specific, it is a GTX 960 from ASUS. I am not shure if my 2x460 W power supplys can handle that much. Do you think this...
View ArticleClik here to view.
Proliant DL380 G6 GPU
Hello people,I have a Proliant DL380 G6 and I want to build a Graphics card into it. To be specific, it is a GTX 960 from Asus. The card When I now want to build it in, I am pretty shure I need a pcie...
View ArticleESXi in ProLiant DL120 G7
On an HPE page, it says that the ProLiant DL120 G7 server is not compatible with the most current versions of vSphere.I would like to know which are the most advantageous versions, because the HPE...
View ArticleClik here to view.
SNMP.....what am I missing?
I have a ML350p Gen8 which I'm trying to monitor with SNMP but I can't do an SNMP walk against the Windows OS.In SMH, I can see the status of the hardware, all good:In services, I have 'Accept SNMP...
View Articlemiciroserver Gen 10 amd graphic driver for windows server 2019
My server is Microserver Gen10 with amd Opteron X3216 cpu and my OS is MS windows server 2019(x64) , after installed the AMD chip and graphic driver for windows server 2016,it can't work correctly and...
View Articleretro fitting E5-2470V2 to a Proliant DL360e
Hi,I've tried fitting two E5-2470V2 to a Proliant DL360e that came with two E5-2450Ls fitted. With the new processors the server fails to reach the POST screen, its OK with the original CPUs back.As...
View ArticleML150 G5 - Connecting SATA drives to system SATA ports via HDD cage backplane?
I received an old ML150 G5 server and am using to learn about HP servers and evolution of the range.The server has a HDD cage with backplane (part 459191-001). In the cage are SATA drives only <2TB...
View ArticleNew Failover/DR Setup
Hi Guys, I have a client that has bought 4 DL380 servers (2PR and 2DR) as well as 2 MSA 2050 (1PR and 1DR).The environment is purely Windows, hence Hyper-V will be in use for virtualization. Any advice...
View ArticleHPE Dual 8GB MicroSD Enterprise Midline USB install
Hello,I would like to know if anyone has tried migrating the 8GB card from the internal SD slot on a Gen 9 server to the HPE Dual 8GB MicroSD Enterprise Midline USB?I'm trying to figure out if it's...
View Article