300GB HDDs 10k SAS Drive is predicted to fail soon
I upgraded X8 146GB HDDs with 300GB HDDs and 6of them were fine but three have gone into a Drive is predicted to fail soon status, I have replaced the drives three times now an I still get the same....
View ArticleSmart Array 642 Controller on HP ML350-G4 - continuous auto rebuild !!
Deal all,we had a disk crash in our HP ML 350-G4.We have replace the faulty one with a bigger 72GB disk, instead the previous ones of 32GB.After the reboot it promts for autorecovery, but it does it...
View ArticleHP Smart Array P420 "the controller is disabled because the cache module is...
HI, I've got a problem on a P420 smart Array.The card was working well and one day ago, i've rebooted the server and got the followinf error "the controller is disabled because the cache module is not...
View ArticleWant three physical drives configured as raid 0...no raid
I have a Prolient ML350P Gen 8. I want to configure the three physical hard drives to be three separate drives. I can't figure it out. Smart Storage Administrator only allows me to create 2...
View ArticleCisco 2901 console to HP proliant G6 not working
Hi All, I'm having difficulty trying to console in,via cisco 2901, to a remote HP proliant G6 server through its serial port. Connection is like this : Cisco 2901/EHWIC#1/Port 10 -> patchpanel ->...
View ArticleExpand RAID 5 without loosing data
Hello, I have a customer with an Proliant ML 350 G6. We now have 4 x 300GB SAS drives installed in RAID 5. I believe there ar two emty slots available and we want to install two extra 300GB SAS...
View Articlegetting failed disk alerts from proliant servers
we have some servers that i've just found out the ilo doesn't tell you if you have a failed disk. As currently we have ILO SMTP alerts. So from what i understand you need agents installed to get these....
View ArticleHP Proliant DL580 G7 with P410i Smart Array controller
Greetings all. I have a simple question, but can't seem to find an answer to it. Is there a way to disable the P410i Smart Array controller from the command line or otherwise outside of the...
View ArticleiLO2 license - 60 days trial - Problem with license key
Hi, We have some issues`s with a 60 day trial version of an iLO2 license that we acquired. This is a trial key for 60 days, but the key is being rejected by the server. Server specs:DL360 G5, fully...
View ArticleWant to create a firmware/driver baselane
I want to creat a firmware/driver baseline for the enviroment but dont know which tool or utility I should use. P.S. This thread has been moevd from General to ProLiant Servers (ML,DL,SL). - HP Forum...
View ArticleCisco 2901 console to HP proliant G6 not working
Hi All, I'm having difficulty trying to console in,via cisco 2901, to a remote HP proliant G6 server through its serial port. Connection is like this : Cisco 2901/EHWIC#1/Port 10 -> patchpanel ->...
View ArticleDL380G5 unexpected shutdowns on a daily basis
Hello all, Since last Wednesday this server of my company keeps on shutting down. It's a DL380G5 that has IIS and some printers on it. On Wednesday it shutdown once. Then it started shutting down twice...
View ArticleFirmware update
Dear Team, I am planning to upgrade firmware of following Servers HPProliant DL580G5 ,DL380 G3 & DL360 G5and required your help for the same.
View ArticleSeveral DL/BL servers with Average Temp of 253 degrees
HiWe have several DL/BLc servers that display 253 degrees C as their average temperature in our remote monitoring tool.Has anyone else seen this issue?Is it hardware or firmware?
View ArticleDL380 G6 power supply light and shutdown
We have a client with a DL380 G6 that has been shutting down unexpectedly. When it shuts down both power supply lights on the status display show orange, the power supply button is red and the status...
View ArticleILO IP from Linux OS
Hi, I have Hp servers with ILO. The server is loaded with Linux OS and connected to the deadnet which starts 10.x.x.x.ILO is connected to the external network. Some how i lost the IP of the ILO. But i...
View ArticleUpgrade from B140i to P440AR
Hi folks, I have a Proliant ML350 Gen9 that was shipped with B140i Raid Controller. We installed ESXi on it, very bad performance, so we will upgrade the controller to a P440AR. If I move the cables...
View ArticleCannot locate CP009682 package - HP Virtual Device 4.6.16.0 (or newer)
I found a few notices on the exact issue I am having: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01684544 and...
View ArticlePinout for HP Common Slot Server Power Supplies (ie. DPS-1200FB A/441830-001)
I have a pair of 1200W server power supplies model DPS-1200FB A, P/N: 441830-001 which I am using for a non server application, and am trying to come across a pinout configuration for the unit. I have...
View ArticleDriver needed for my HP Proliant ML350 Gen9 server
I'm looking for one missing driver on my HP Proliant ML350 Gen9 server..i have Small business server 2011 x64 installed Universal Serial Bus (USB)...
View Article