Insight Manager on DC's Server 2012
I am trying to setup monitoring on a couple of Server 2012 Domain Controllers. The monitoring software I have uses SNMP and Insight Manager.Unfortunately I am unable to install Insight Manager on the...
View ArticleHP DL160 G6 Windows Server 2012 R2 Installing
Hello!I tried to install Windows Server 2012 R2 to server, but OS didn't recognize Smart Array b110i adapterScreenshot: http://screencloud.net/v/q4Aj How can I install Windows Server 2012 R2?Please help.
View ArticleWS 2008 -> Windows could not update the computer's boot configuration
G'Day Guys I have been asked to setup a ML350 G5 for a primary school in my area, so they dont have a lot of $$$s as they only have 100 students !!! I am more familiar with IBM & Dell servers, so I...
View ArticleHp proliant ml350 g6 Completely Off
I having been running the Hp proliant ml350 g6 for close to a year: But one morning when i reported to work, i found it completly off: The fans on the power supplies are running but no led lights on th...
View Articlein b140i (DL80 gen9 server) how to increase Read Cache Size from 64MB to 128MB ?
I'm looking for hp ssa cli command to change Read Cache Size and download link for correct iso supporting b140i Thank you
View ArticleDl380 G3 Server, Fan Control ??
Hi, I have a dl380 g3 server. Os: Win server 2003Redundancy: fullAll drivers installed, also psp installed, latest firmware for bios and ilo, all reseated:bios riser...Snmp configured before psp...
View ArticleEOL and EOSL for 5 servers
Can someone provide the end of life and end of supported life for: ML350 G6MicroServer G8ML310 G4DL380p G8DL120 G5 I would find it myself except... I can't
View ArticleArray P400 and Disc problem
HiI have the HP Proliant ML 350 G5 Smart Array P400 controller - 4 drives 146 Gb 10RPM RAID 10One of the drives of the drive has been damaged.I decided to buy a new drive ... but unfortunately, in...
View Article[POST1783] ML350 GEN5
Hi guys,In the work we have a ML350 GEN5 server, but we've got the post message 1783 Slot 0 Drive Array Controller FailureDoes somebody can help us? or explain about this message?Thanks
View ArticleRecover data from Raid 5 to different server
Hi, We have a dead server (motherboard might be dead) ML350 G6 with Smart Raid controlles P410i with Raid 5 configured.My question is how can I recover the data from the hard disks, since the...
View ArticleHP PL DL180 G6, backplane, P420, SATA3
Hi,We have a DL180 G6 with three 850 1 TB EVO disks and p212 controller (we are using the Adapter Tray from 3.5 to 2.5)The current speed is kind of slow, and ACU shows that the drives are connected via...
View ArticleTrying to erase the hard drives, RAID card hiding disk serial numbers
Hi there, I am currently working with a Proliant DL360 G6 using a software to erase the hard drives in the machine. The problem I'm having is that the raid configuration utility is reading the serial...
View ArticleML350 gen9 with P440ar - can SAS expander card be used with this controller?
Hello, We have the mL350 gen9 wiht P440ar on board controller (instead of the PCI-card version P440, P440ar = standard configuration in order to save an PCI slot). In a lot of documentation we read...
View ArticleDevice is ineligible for IOMMU domain attach due to platform RMRR requirement
Hi FolksIs PCI passthrough supported on DL380 Gen 9 server? I have a 2 port 10 gig X540-AT2 and a 2 port 10G 82599ES linecard and I am not able to pass through these devices to a quest I get the error...
View ArticleHP DL380 G5 server issues
Hi All, I have a HP DL380 G5 server, i have 16GB RAM installed and the server boots up no problem. When i install 24GB ram the server does not boot up. It powers on for approx 3-4 secs then shutsdown....
View ArticleHP DL180 G6 - Error : 622 Redundant Fan Configuration, Multiple fan failure
Hello Experts, We have an issue with our HP DL180G6 Server. Recently Motherboard was replaced and after that the problem started.The system fail on POST and will shutdown automatically with throwing...
View ArticleUpdating HP NC382i DP Multifunction Gigabit Server Adapter drivers
I have an ML360 G7 server running Windows Server 2008 R2 with 2HP NC382i DP Multifunction Gigabit Server Adapter Interfaces managed as a Team by HP Network Confnguration Utility.If I try to change the...
View ArticlePartition size error 0 MB on DL 360 Gen 9
Hello there, we have a DL 360 Gen 9 configured with 3 x 600 GB HDDs, Array is Raid1 ADM. When I use Intelligent Provisionig the system tells me that my configured partition with 0 MB is smaller than...
View ArticleGen 9 UEFI settings
Hi, Where can i find full details of all the settings and configuration options now avaialbe within the UEFI on Gen 9 Servers? Thanks
View ArticleGraphics card for DL380 G6 or DL360 G6
Hello, I'm wondering if its possible to use a graphics card in a HP DL380 G6 (I also have a G5 and DL360 G5 and G6)Which card should work on one of these servers, it has to be supporting openGL 3 and...
View Article