How to connect both SAS- and a SATA-RAID
Hi folks, a knowledge question for HP and Windows server users: I plan to have a small Hyper-V system based on ML150 Gen9. There will be an P440 controller. Then there will be a RAID 1 consisting of 2...
View ArticleITRC Forums - DL380G5 & MSA20 + MSA30?
My current configuration DL380G5+MSA20 connected via SA6402 has been working fine under SUSE EL9. I'm trying to connect MSA30 via second port on SA6402 (none another internal port is being used). I can...
View ArticleSubject: Proliant DL360 G3 to Compaq Storageworks EK 1502 Series
Planning to install ESX 3.5 U4 on the HP Proliant DL360 G3, trying to figure out which single channel PCI X HP storage controller card is compatible with ESX 3.5 U4 to connect to the Compaq...
View ArticleDL380 G4 - Windows 2k3 update
Good Morning,since few days, I try to update my server at the latest Microsoft Windows Server Service Pack, but any time I try to install the HP tools (ProLiant Support Pack ) I receive this error:...
View ArticleML350P tower to rack conversion
I am in the process of converting said new server to be rack mounted. Item# 8 on the install guide says to remove all screws on the base cover of the chassis. One of the screws is so tight that it is...
View ArticleDL170h G6 system board LEDS
The health indicator flashes red, there is no screen output, and looking in from the back I can see an LED on the system board flashing amber. Comparing with another board, which is not in the rack,...
View ArticleHP SUM utility - custom baseline missing iLO firmware
I have created a custom baseline for use with HP SUM 7.3. I only support Windows ProLiant servers, so I dont want all the Linux, blade, and storage updates in the baseline (which slows down the...
View ArticleMicroserver SATA
I am using an HP Proliant Microserver N36L in a small business, with Windows 2008 R2 Foundation. It has 2x250GB drives in a RAID 1 array. These are the original HP SATA 3G drives.I have added two new 1...
View ArticleP410 in ML110 or ML350 G9 Servers working?
I still have some functional SmartArray P410 Controllers left and I am wondering whether or not I can use them in the latest ML110 or ML350 G9 servers. I appreciate your replies.
View ArticleProliant DL380 G9 - Intelligent Provisiong
Hi, We have a new server I'm installing 2012 R2 to using Int Prov. I've configured my RAID to two logical drives of RAID 10. When I get to the customize the install it wont let me select a partition...
View Articleset bios time via iLO 4 textconsl
I would like to set the bios time via hp iLO 4 (Firmware version 2.10 Jan 15 2015) textcons.As far as I can tell this is not possible, since accessing setup requires pressing F9 in a graphics screen...
View ArticleHP Proliant ML350p Gen8 Turns itself off after power-on (rack server)
From what i can make out the ambient temperature sensor (has / is failed) and it's reporting 55c so the server is shutting down, but the room is only 18c Can I get a replacement or is this part of the...
View ArticleHP ProLiant MicroServer Gen8 - RAID1 Configuration
Hi all, I'm not sure If I post this message in correct topic of this forum, if not, I'm sorry. I've an HP MicroServer Gen8 and I'm very happy with. But for security reasons I want to mirrored the two...
View ArticleDL380 G6 Base System Device
I have a Proliant DL380 G6 that I installed a PCI device into and the server is not recognizing the card. I noticed in Device Manager it's showing "Base system device" without a driver. The server is...
View ArticleDL380 G7 BBWC - how do I mount it
I bought a battery backup for the RAID controller but can't find where to mount the battery. Does it require a baracket?Thanks in advance for the help.Dave
View ArticleHow to configure Raid 10 on a P440ar controller
I'm new to the tech field and I have what is probably a real simple question. How do you configure Raid 10 on the P440ar controller. We just got a new server in with 8 900GB drives and our accounting...
View ArticleGot a used HP Proliant ML370 from work. No video output...
The server starts up fine with no LED indications of a problem. After a while I hear the beep to show the server has booted up. I have a VGA cable that I have tested with another computer and another...
View ArticlePOSD en Windows Storage Server 2003
Hi!I havea server withWindowsStorageServer2003 SP2(ProliantDL380G5), whichhas presented severalrestarts, reviewingthe eventsshowsa coderelating topSOD, however,I have not foundanyrelated datathat...
View ArticleHelp on Intelligent provisioning using deployment templates
Hi, We are currently using Smart Start scripting tool kit for OS provisioning on Gen 8 and Gen 9 servers. We are exploring the Intelligent provisioning option and before going for that, we would like...
View ArticleML350 G6 - Replacing an 146GB HDD with a bigger one on a RAID5
Hi, I have a ML350 G6 with 3x 146GB SFF HDD in RAID 5, running Windows Small Bussiness Server 2008. The ACU is reporting tis: 146 GB 2-Port SAS Drive at Port 1I : Box 1 : Bay 1 is predicted to fail...
View Article