Invalid system disk. Replace the disk, and then press any key. DL380 G6
Hello all. Have a refurbed DL380 G6 that works great. Howver have Vsphere 5.5 installed and has been crashing lately, so tryng to reinstall fresh version of ESX 5.5I use a USB flash drive to boot the...
View ArticleRAID question
I have a Compaq ML530 system with a SmartArray 3200 controller and the following hot pluggable RAID configuration:Array A: 2x9.1 gb RAID 1+0 (holds the OS)Array B: 2x9.1 gb RAID 1+0Array C: 3x18.2gb...
View Articlehow to diagnose if Internal health LED of proliant DL 380 G3 server is amber...
Thanks UWE!! You got the problem right.But How to diagnose which component failed.For this I will have to open the access panel in order to see the internal LEDs on the system board and that too while...
View ArticleHow to setup Raid 1???
A "HP ProLiant DL140" server want to setup Redhat 9.0 and use Raid 1.>>HardDisk:ATA-100 (Enhanced IDE),80GB * 2Which one can ask me how to setup it?
View Articlehp Proliant ML 350 G6 RAM Upgrade
Dear All,First I am sorry if i am in wrong Forum and also apology for my English!We have HP Proliant ML 350 with Currently total RAM installed 20 Gig. We want to expand RAM:1-How much of RAM support on...
View ArticleHP DL380G5 - No Post ??
Hi Everyone, Thanks for looking at my post and I hope there is an answer to this ... I have a Proliant DL380 G5 that used to have a DC 3ghz processor .. I talked to HP Support and they told me it...
View ArticlePower Usage
Where can I find the actual power usage for an HP ProLiant ML150 Gen9 Server? We have just bought one for our business and need to put a UPS on it. I am thinking of a Riello UPS from...
View ArticleHP ProLiant ML350 Generation 6
Hello Experts,Do you have managment software to install on HP ProLiant ML350 Generation 6 to let us to see, how many slots, RAMs, CPUs or any hardwares installed on this server?Best Regards,
View ArticleRemind ilo. How?
I buy server. 2 years ago.Additional buy advanced ILO licence with 1 year sup.I have activation number XXXXXXXXX - short nubesr and digits.I activate this number on hp.com by link on licence...
View ArticleCPU Cores not detected - HP DL 360 G9
Running 64bit linux kernel (SuSE variant). Server has 12 cores (2 CPU). Only one core is being detected by the OS (/proc/cpuinfo). Running in Legacy BIOS Boot mode and all virtualization is...
View ArticleSmart Array p400 change disk position problem
I have here a DL380 G5 with a Smart Array p400 controller. This is a training system and somehow after swapping parts and playing with SAS cables, the original RAID1 in slots 1and 2 got moved to slots...
View ArticleHot Plug vs Non Hot Plug drives
Greetings all. I have an ML330 I'm using in a test environment. It has no array controller or Compaq SCSI drives in it at the moment.I'd like to add an inexpensive array controller and three drives. I...
View Article6402 ultra320 controller upgrade
After trying in vain to work with MS on our Exchange 2000 performance problems, we have finally decided to throw hardware at the problem. We have a Proliant DL380 with the integrated 5i RAID controller...
View ArticleI want to khow install server windows 2000 use disk mirrer.
I have server DL145 2 server and i want install windows2000 server and khow how set raid mirrer disk and anoter raid 1. server one have 2 harddisk 72 GB 10000 Rpm wide ultra320 scsi raid 0 disk 2....
View ArticleML10 V2 Cant Find Ethernet Driver 1Gb 2-port 332i Adapter
Hi All, just want to ask for your help. I cant find the rigth driver for the subject model. Thanks in advance!-xeonlans
View ArticleDL 160 Gen6 - Randomly shutting down
Hello,Our DL 160 Gen6 server has begun in the last two weeks to shut down randomly by itself.The next error appears in the event log: VRD_FAIL_LED State Asserted AssertionWe have replaced the PSU...
View ArticlePopulating DL 380p Gen8 Server memory
Dear All, We have HP DL 380p gen8 server with two processors, each processor is having 12 slots. Processor is CPU E5-2650. Memory total installed is 64GB and each processor is having 4 slots filled....
View ArticleConfiguring "Authentication Failures Before Delay" feature via hponcfg
ILO4 firmware 2.22 introduces a setting whereby the failed-password login delay can be tuned. Unfortunately, I see no means of configuring it in the ILO's RIBCL dump or in the ILO CLI's /map1 area...
View ArticleHP DL380 G8 Intelligent Provisioning unable to connect to update server
Hello, I'm trying to run the firmware updates on a DL380 Gen8 server using the Intelligent Provisioning. I have confirmed that the NIC is configured and working. When I click on the firmware option I...
View ArticleA firmware update is recommended for this physical drive
hi, today i've recived a warning in my DL580 G7:" 284 300 GB SAS HDD at Port 1I : Box 1 : Bay 4 : A firmware update is recommended for this physical drive. Model: HP EG0300FBDBR "i think i have found...
View Article