SmartArray 6402 & Linux 2.4.23
Can anyone share their experiences regarding use of this controller under Linux 2.4.21 and greater. I'm considering purchasing a DL380 with a SmartArray 6402 and installing Slackware 9.1 with Linux...
View ArticleLooking for SPP & SUM for DL185 G5 Storage Server
I'm looking for latest SPP & SUM for HP PL DL 185 G5 Server.Please do note that, Windows 2003 x64 is been installed on the system.
View Articlecpqcissm
ProLiant DL380 G3 with a Smart Array Cluster Storage (firmware version 1.66) / W2k Advanced Server - SP3When i try to change cluster resources, i'm getting a lot of this errors:The device,...
View ArticleCompaq (Adaptec) Ultra160 SCSI card connected to ADIC Scalar 100 tape library
i'm having much difficulty getting my compaq ultra160 card to recognize the scalar 100 during the bus scan. i know the card is being recognized by the server (proliant ml370 g3, win2k) because the hp...
View ArticleBackgroup parity initialization
I have 3 arrays configured on a proliantML570, with RAID1+0 on arrayA (for OS) and RAID5 on arrayB and C(for data). After I extented arrayC, the background parity initialization started running. Now,...
View Articleunbuffered or registered RAM
Good Morning,We do have a hp Proliant ML 350 G6 with current memory installed 20 GIG.We want to be upgrade this memory to 32 GIG.I read some of topics online regarding server memory upgrade, we need to...
View ArticleSmallest Rack size possible for DL380p?
Hi, I have a HP Proliant DL380p Gen8 Server. When I measure from the inside bracket edge to the back of the server body I measure 700mm. I have a 19in rack that I could use, that is 700mm from 19in...
View ArticleHP Proliant DL 360 G5 iLO 2 Upgrade Inquiry
Hello, I have a pair of the sibject servers running VMware vSphere 4.1 (ESXI 4.1). I want to upgrade the iLO firmware on these servers but I have to know a couple of things before doing this:if I go...
View ArticleCan't find driver hlp pls
Have old ProLiant ML350 G4p server.SCSI controller inside.Can't find 2008 R2 server (2012) drivers for this controller.Please help! P.S. I found Smart Array 641 Controller drivers, but from SATA/SAS...
View ArticleMoving array from one server to another
I've got two similarly configured DL380G2 servers - dual proc, 1GB RAM, 5302/64 controller, mirrored 18GB OS volume.One server has a 4-disk RAID 5 array using 18GB U3 drives with approximately 40GB of...
View ArticleSmartArray 532 perfomance
I have Compaq ML370 G3 server with SmartArray 532 controller, installed in 64-bit 100Mhz PCI-slot. There are disk-cage with 4 disks connected to array controller by Ultra-3 scsi cable with active...
View Articlestoragework 4354 and smartarray5304 volume limitation
Hi,I 've installed a system with 14 disks in a storagework 4354 connected to a smart array5304 in a ML370.When I launch the volume creation to have an ADG (or RAID6) I cannot create a volume>1TB.Is...
View ArticleStorage Enclosure not responding
I have a ProLiant DL380 with a Smart Array 4200 controller to which Im trying to connect a Storage enclosure. But regardless of what bus on the controller I connect the enclosure to I get the following...
View Articlep411 controller battery not detected
Hello, I have a P411 controller in a DL380 G6 attached to an external array. ACU does not detect a battery (see attached screenshot) but I know there is a battery pack. I removed the riser, removed...
View ArticleP410i controller - converting raid-0 to raid-1
Hi,we have a windows 2003R2 server with a 410i controller. The first array has one disk drive and one logical drive which holds the operating system. I have installed one more drive and want to mirror...
View ArticleHow to find pairs in a Raid 1+0 Array E200i ?
Hi I have a problem here with my raid 1+0 arrayi have 4 harddrives in bay 1-4 of Hp Pro laint ML350 G5 with e200i controllerwhen i have set up the array i choose the 4 drives and set them to raid...
View ArticleRAID Array Config Software
GuysI'm trying to log into the HP Array Config Utility on a ML570 G2. it tries to open hpapp://ACU-XE/ACU-XE.htm but the page failes to load.I was going to try reinstall the application but can't...
View ArticleSmart Array 3 disk RAID 5 to 2 disk RAID 1 migration
Hello people, please take into account I'm not an native english speaker.I'm wondering if this is at all possible:We have an Proliant ML530 G2. It has an Smart Array 431, firmware version 1.24. We have...
View ArticleSwapping SA 431 and SA 3200
Can someone shed some information if there would be performance gain to what I'm planning to do?We have a Smart Array 3200 with Ultra3 drives in an ML370G1 and an SA 431 with Ultra2 drives in an...
View ArticleBoot order with SSP
I have configured a DL380 G3 server to boot from a logical drive on an MSA500. Using SSP, I have made 2 logical drives available to this server. However, because the boot drive is a "higher" number in...
View Article