Duplicated traps from iLO & ESX
Hello everyone.Brand new DL360 Gen9 - latest SPP applied , iLO4 v2.40 , ESX 6.0 U2 (HP image)I have a very strange issue with traps from iLO.When iLO is having some internal issue (easy test - just...
View ArticleCan a dual slot video card fit inside a dl380 g6? (gtx 600 oc)
Hello all, I'm in need of better graphics performance on my server (hopefully I can use remotefx), mainly for some vms I will be running, they need to be able to at least stream video, probably 480p...
View ArticleWhich Model of Video Card foro Pro Liant ML310 G2 ?
Unfortunatelyonboard video cardof my Pro Liant ML310 G2.seemsburned.Server Mainborad has got following slot : PCI_Express x4PCI-X32-bit/33 Mhz 3.3V PCIIn which slot do i have to place a dedicate video...
View ArticleDL380 G7, Install Windows on onboard Intel SATA Option
HiI have an DL380 G7, where I have attached a SSD Disk to the onboard SATA controller, Intel 5520 Chipset.I can see at POST, that the server correctly identifies the drive as a hard disk, and shows the...
View ArticleInstall Display Card In ProLiant DL580 Gen8 Server
My Product Name: ProLiant DL580 Gen8 ServerWe have a ProLiant DL580 Gen8 Server and want to install Gigabyte GForce GTX 980 ti Display Card in PCIE slot, When we connect 8 pins sockets power, server...
View ArticleiLO 4 ProLiant DL360 Gen9 - eRs Active Health Report Failed: Client Receive...
Hello,Last eRS reported that a new version of iLO was available and we have updated it or no reports would be sent( Well not really the eRS report but there would be some issues. If needed I can post...
View ArticleClik here to view.
HP SMH not displaying server components for HP ProLiant DL360 G4 Server ?
Hi All,I'm curently running Windows Server 2008 R2 on my HP ProLiant DL360 G4 Server.After installing all the necessary update and files using HP SPP 2016.04 why I cannot see the server hardware...
View ArticleNoisy fans from DL 360p G4 server ?
Hi,My user is complaining that the server in the server rack is running noisy.The server is HP DL 360p G4So I wonder what can I do to reduce the speed of the fans ?I have blow the dust out using...
View ArticleProblem with HP Smart Array P410i and SAS Expander Card it shows error 1746 -...
I have an HP Server G7 and when installing a SAS Expander card it shows error 1746 - Unsupported Storage Connection Detected - SAS connection via expander is not supported on this controller model...
View ArticleW7 on Proliant DL360 Gen9
Can I install W7 or W10 on a Proliant DL360 Gen9 system?When I try to boot from the disc (MS W7) I immediately see alot of error codes on the screen; however, if I use HP Intelligent Provisioning...
View ArticleCant Ping Dl380 G9 - Win Server 2012 R2
I am newbie and recently installed Windows Server 2012 R2 in HP Proliant DL380 G9. I have configured static IP in Embedded LOM 1 Port 1. Internet is working fine. I can also ping client machines from...
View ArticleML360P Gen8 hangs when trying to install Server 2012 R2
Server preiviously had Server 2008 R2 and I am rebuilding. Upgraded IP to 1.62b and can go though the wizard, select all the options but when it tries to boot to the media I just get a windows logo...
View ArticleML350P Gen8 hangs when trying to install Server 2012 R2
Server preiviously had Server 2008 R2 and I am rebuilding. Upgraded IP to 1.62b and can go though the wizard, select all the options but when it tries to boot to the media I just get a windows logo...
View ArticleHP Proliant ML150 G3 GPU?
Could anyone point me to some good GPU reccommedations any at all?I recently pick the ML150 G3 at a dump for $5NZD ($3.50USD) looking to make a project out of it.Currently I am going to buy x2 INTEL...
View ArticleRAID 1 rebuild stuck on 0%
Hi,One of my clients has an old HP Proliant ML150 G6 1.0 with a B110i raid controller .All weekend the server was down and this morning the office manager restarted the server and selected F1 to start...
View ArticleRecover a BIOS Mode backup on a ML30 with UEFI Boot
I have to Recover a Bios Backup (ML310) to a ML30Setting ML30 to Legacy BIOS Mode -> the Smart Array isnt reconizedSetting ML30 to UEFI Boot Mode-> the Recover stops with a Error (BIOS on UEFI...
View ArticleSmart Array in BIOS Mode on ML30
Is it possible to make the Smart Array work in the BIOS Mode ?Thx Benedikt
View ArticleHP DL360 Gen9 - Unable to launch HPSSA
Hello,We have 2 new HP DL360 Gen9 to configure and with one of them it is impossible to launch the HP Smart Storage Administrator.When the server boots up, I select F9, go to the RAID Controller menu...
View ArticleInstall HP SPP via powershell
When I run the commands to install the NEW SPP_2016.0.4.0: $arg = "/use_latest","/allow_non_bundle_components","/silent","/r"Start-Process -FilePath .\hpsum.bat -ArgumentList $arg I get an exit code,...
View Article