1 logical drive failed
hi, i am facing a problem in my HP ML150 G1 Server with two SCSI Hard drives with RAID 1, creating problem no ligical drives detection. Error showingSCSI IDs are not responding 0 3 41 logical drive...
View ArticleML370 G4 Tower with Smart Array 6404/192MB, Ultra320 SCSI configuration question
I have a used ML370-G4 with a Smart Array 6404/192MB RAID controller card. The 6404 RAID controller card has two internal SCSI connection points available and two external SCSI connection points...
View ArticleIllegal Opcode message when trying to install OS
I've got a Proliant DL 320e Gen8 v2, and I'm trying to install Debian via a USB thumb drive. If I try booting to the USB installation disk, I get a red screen with "Illegal Opcode". I tried disabling...
View ArticleBIOS update from a remote location using iLO 100 card - possible?
Hi, we have two DL160 G5 servers, that we don't have physical access to. We connect to them via BMC (Lights Out 100) card. I have upgraded the BIOS on both servers, which was successful (it had...
View ArticleDL580 G5 fans running at full speed, all LEDs on and won't boot
I have a customer DL 580 G5 server with 2 Processor. Server powers up, all fans start running full speed with all LEDs on and server wont boot, no display, server hangs in same state.I have done...
View ArticleHP Proliant M110 G6 Reset BIOS will affect RAID 0?
Hello to everybody. [HP Proliant M110 G6 & W2008 Server] I have a problem in an old client that I'm not sure how to solve it. All the user's passwords have been expired, also Administrator...
View ArticleILO Firmware Matrix
Hi I was wondering if there is a matrix for ILO firmware? In my environment I have various models of PL servers from G1's to G8's and the ILO version on them range from the original ILO to ILO 4....
View ArticleConfigure ILO to authenticate against AD
I want to configure my ILOEs to use AD accounts instead of individual ILO credentials. But have not been able to find clear directions on how to set that up. Any guidance is appreciated. Thanks
View ArticleProliant DL360 G5 Fanblock problem
Hi folksI hope you can help me here:I have a HP Proliant DL360 G5 Server, with 2 quad core CPU's. The problem is that the Fan block in the middle is running a lot slower than the others, and that...
View ArticleHP Proliant ML310e gen8 Blue Screen after OS installation.
OS: 2011 SBS Its the first installation of the server. we update the server with the latest SPP and IP recovery media and after that we proceed to installe the OS. we use the driver of 2011 for the...
View ArticleRetrieving P/N on DL380 G5
Hi all, I sought the Internet for retrieving P/Ns of my DL380G5 but I didn't find anything. On the web interface of iLO2 I don't see anything and I haven't found anything related to IPMI either. The...
View ArticleHP Proliant - RAID B320i + Disk SAS + Licence key - Disk not found.
Hi, We have a HP Proliant DL360E Gen8 Server (Ref 683948-425) with a Dynamic Smart Array B320i.To install SAS Disk we need the HP SAS License Key for B320i.On the ACU we entered the license and the...
View ArticleOnline data migration beetween 2 RAID-5 on the same SmartArray P400_512MB BBWC
Hi there. I have Proliant DL 380 G5 with 8 bays of 2.5" HDDs. I have installed: SmartArray P400_512MB BBWC controller5x 73GB configured as RAID-5 (lets call it RAID_A)3x 300GB configured as RAID-5...
View ArticleMl110 G7 storage controllere upgrade
I am after upgrading the storage controller that was shipped with my Ml 110 G7 to one capable of raid 5. Currently there is 4 drives in the server being used as standalone data stores for ESXI. I want...
View ArticleHP NETWORK CONFIGURATION UTILITY NOT WORK
Hi, I have a HP ML350 G6 server and teaming network disolved team network after install exchange update, hp network configuration tool not creat team again, why?
View Articlewhere did my SNMP test trap go?
dl360 G6/RHEL 5.8 (one system only: the CMS is 127.0.0.1 and the managed server is 10.0.0.3) The rest of the configuration stuff is in enclosure. When firing off the "test trap " from SMH I do not see...
View Articleserver HP Prolaint ML 370 G4 RAID down / OS / data lost
hard 3 x 72GB disks are RAID one of them is down and damaged, i bring new one and replace the damagedOS windows server 2003 is down can't boot with error (there is no disks)i got the smart CD and...
View ArticlePassword Reset - Lights-Out 100i DL180 G6
I just got my hands on a DL180 G6 that I don't have the user/pass for its iLO , I have tried upgrading the iLO firmware, downgrading and still can't log in with the default user/pass... Is there a...
View ArticleHow to reset administrator password for HP Proliant ML350p Gen8 Server
Hi there I have HP proliant ML350p Gen8 server,with windows 2008 R2 OS, for some reason its windows log in password is not accepting, How to reset the administrator password.
View ArticleQuestion(s) about Migrate Logical Drive in ACU
I'm in charge of an HP Proliant DL380 G7 with the Smart Array P410i. It has one array/logical drive. Currently there is 900 GB of unallocated space. I would like to be able to use that space since...
View Article