Riser for DL385 Gen10
Hello everyone,Does anyone have any information on whether the following components can be installed in the DL 385 Gen10:2 x Maxtor C680 graphic cards (requires full lenght slot) + capture card Maxtor...
View ArticleSmart array s100i SR gen 10 sw raid software for windows server 2019
I have a ml30 gen 10 server with hpe smart array s100i SR gen 10 sw raid controller. The server is beeping and I think raid 1 is out of sync. Where can I download software for windows server 2019 and...
View Articlesmartupdate - Error: Cannot get a valid session. Please check whether the...
Hi .. im racking my head and cant find this error.Have smartupdate installed on linux. # smartupdate --s --target my.ip.addy --targettype oa --username user --password pass --use_location /var/tmp/spp...
View ArticleClik here to view.
ML110 Gen9 cannot read current power reading
My machine has been configured with RPS Enablement Kit and two 750W Hot Plug Power, but the current power readings cannot be displayed in iLO, and the program reports that this platform is not...
View ArticleML350 Gen10 random shutdown
Brand new ML350 Gen10 server with Windows Server 2019 started to shutdown unexpectedly since a couple of weeks. It has done this three times now. Windows event logs don't show anything, even no...
View ArticleHP Proliant DL360 BIOS firmware update
hello AllSomme body help me to get HPE proliant DL360 Bios firmware. link to download it if possible.thank advence
View ArticleBonding not working with non-HP switch
Hi HP, Ethernet Bonding is not working with non-HP switch.HP DL380 gen9 to non-HP switch.1. Both ports indivdiually working fine. But when, one of the bonded ethernet port disabled secondary port...
View ArticleDL380P Gen8 Graphics Card
Hi,We are trying to run two graphics card on a DL380P Gen8 with 2x E5-2690v1 and 2x 1200W power supplies. We bought the 662525-001 PCI Risers as well as the molex adapters to plug the power into the...
View ArticleCan't update firmware on P816i-a controller. Get error 0x14803 installing...
I can't seem to update the firmware on this gen10 server. It has a P816i-a so I downloaded the firmware...
View ArticleHp proliant ML350 G5 hdd problem
Hello everyone, recently I noticed a problem that I think is related to the hard disk ( I state that I have tested the HDD in other servers and does not present these problems) . I own a proliant ml350...
View ArticleHP proliant ML350p gen 8 drive positions appear to have changed
Hi. I got one hard drive failed in raid. After this, ive tried swapping working drive with failed (swapped bay 2 and bay when server was off. After this, i booted server up. It was my mistake and...
View ArticleClik here to view.
ILO Federation: no peers
Hi,I'm trying to setup ILO Federation for a couple of DL380Gen10 server. I did not change much on the iLO Federation page, I can't see any other devices. I created a new group, chose a key, and...
View ArticlePOST Error: 1770 - Slot X Drive Array - Disk Drive Firmware Update Rcommended
Hi,I have a HP ProLiant DL360p Gen8 server with OS Version "Windows Server 2008 R2". The server was rebooted unexpectedly. HP ProLiant Integrated Management Log (IML) Viewer contains the following...
View ArticleClik here to view.
HP P440 4GB migrate from RAID 5 to RAID 6
Hi, good afternoon.I have this controller installed on an ML110 G9 with 8 x 10TB on RAID5. The controller has battery for the cache, and the free space in the set is 27TB of a total of 70TB or so.Why...
View ArticleServices and controller app in Windows 2019 Server consume CPU resources
The idling CPU usage on a HPE Proliant ML110 Gen10 with Windows 2019 Server STD is at 5 to 8%, which is higher than my other Gen9 ML servers with windows 2012 R2 or 2016. Particularly the Services and...
View ArticleiLO 5 - Missing "Settings" and "Workload Advisor" under Performance,...
Hello!I was really excited to find the "Settings", "Monitoring", and "Workload Advisor" under Performance on my customer's DL380 Gen10 iLO5. However, when I looked at my second server, the "Settings"...
View ArticleSmart array e200i write slow
hello everyone, I have a sata hdd 2tb toshiba in the e200i smart array and it presents me with a problem: in the writing speed it does not exceed 20 mbps and in reading it works regularly, I also have...
View Articlecentos 8, DL380 G5, P400
I have a couple of DL380, G5 machines with the P400 controller. One is running centos 7 with the hpsa.hpsa_allow_any=1. The other is running vmware. They both work fine. If I try to use centos 8 it...
View ArticleHP ML350 G6 PROBLEM LED CR7
Hello, can someone help me?I have a ml350 g6 4gb (2x2gb) 1xE5620The server start, but without video, the cooler is at maximum, I'm sharing a link with video and photo.A photo where this is the...
View Article