Hi
We have a new Server DL380 G9 and we need these items in order to get the SMH to display the correct details, but there is no option to download them on these links?
How do we get these updates please? Should they be part of the SPP?
Thanks
↧
WEBM updates fro SMH - where to download?
↧
Proliant ML310e Gen8 Fan noise
Hello friends.
I got a Proliant ML310e Gen8 and when I connect the network cable, fan goes to maximum.
Dont know what to do...
Thanks a lot, see you around.
↧
↧
No DL380 GEN 9 Windows 2012 R2 support?
I've installed Windows 2012 R2 on a new DL 380 GEN 9 HP server, and went to the support site to download the latest drivers,firmware and Management Agents and found that there is nothing available to download. There is 1 link for the SPP but the link goes to an invalid page (see below). Are there truely no drivers and firmware updates available because its a new system?
Access to the kiosk product denied.
Possible reason is: A wrong URL link of your site is provided to Software Depot.
Please check with your support.
or click on the link below to login to your kiosk:
Kiosk Login
↧
Storage
We have HP Proliant DL380-G6 Server with HP Smart Array P410i Zero memory controller, 512 MB battery backed wiredcache for 410 controller for RAID 5.
We have 146 GB SAS hard disk - 2 Nos. (RAID 1, meant for Windows OS)
and 300 GB SAS hard disk - 4 Nos. (RAID 5, data partition)
Available free slots - 2 Nos.
How many arrays can be created with an array controller?Already 2 arrays with 2 RAID functions are created.
If we purchase a 1 TB hard disk - 2 Nos. will it be beneficial for us?
An old report file is attached for checking the configuration of the server.
Thanking you
Jiju P.T
↧
DL380p Gen8 Memory for Virtualization
My DL380p Server came with HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Reg CAS-11 Memory Kit and I populated the server with HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Reg CAS-9 LP Memory Kit (647897-B21). Now, my question is; is this a good setup for virtualizing servers? I feel that the memory that I bought is of less speed than what was already there. I bought it because it was listed under compatible memory and description said suitable for virtualizing environment. Could someone please clarify before I start on this project?
Thanking you,
Shereef
↧
↧
ML150 Gen9 - Array driver B140i lost each time after incorrect power off
Hello!
I faced of with problem with work array B140i driver when incorrect power off.
In our office often happened problems with power, power backup not help.
When server switch on after incorrect power off, i get message about not found boot drive.
I load OS (Windows Server 2012R2) in recovery mode and sее drive array not found. Then i do driver loading (command drvload from shell) and execute startup problem recovery procedure. After this manipulation OS startup normally. But next day problem repeated.
How can I solve problem?
I have other (non HP server) and they startup without any problem after incorrect power off.
↧
ACU on Hyper-V Core Server
Hi,
We have a 2012 R2 Hyper-V Server running in Core mode. We can access the SMH on this Server fine from a client PC, but how do we access (or setup access) to the ACU on this Server in order to manage the arrays etc?
As an exapmple this is what we wnat to achive:
Thanks
↧
HP Proliant DL380 G5 all drives in RAID blink green 2 Hz
hello,
I have 2HPproliantDL380G5server andone of themcrashesoften.
When that happensthe screenis blank, the keyboardand mousedo not respondand indicator lightsLEDsof allRAIDdisksblinkgreenevery 2 seconds(see video attached).As soon as Isimply pressesthe power button the server stops.
Thank youfor helping mefindthe problem.
↧
iLO4 Email Notification
I am in the process of setting up E-mail notification within iLO4
we have 3 HP ProLiant DL360p Gen8 Servers two are running
iLO4 Advancd License Type
iLO firmware version is 1.13
When i go to Administartion -> Managment
I only see SNMP Settings,
We dont have any SNMP Server or Trap set up, i would like to know if we can get emails out from our SMTP Server ?
I tired putting in our SMTP and DNS server ip address into the SNMP Alert Destiniation but still didnt get any test emails.
↧
↧
HP DL380p Gen8 - Win2012R2 Bluescreen
Hello!
We have 3 servers HP DL380p Gen8 with Win2012r2 OS installed. Time to time we have BlueScreen see in the attachment. We have installed lates Firmware and Driver updates but issue not solved. Any ideas?
Thank you for your Ideas.
↧
Installing HP tools on G8 running Hyper-V
Hi
We have a ProLiant DL380p Gen8 that run Hyper-V Core version 2012R2 (without the Windows part)
I was wondering if it is possible to install all the HP agents, drivers and tools on it since it does not really run Windows itself. And also have it managed by HP SIM
If it is possible what would be the best way of doing it ?
Thank you for your help
↧
Expand RAID 5 Smart Array P410i
Greetings,
We have a Proliant DL 360 G6 running with Win2K8 R2 x64. OS running on RAID 1 (2 disks) and DATA on RAID 5 (4 disks), both without Write Cache.
Now I want to expand the RAID 5 with 2 more disks, but I don't see any options in the ACU for disk expanding. I do see an option to assign them as spare.
Please advise.
Thanks.
↧
RAILS for a ML370T01 Need Help
I have a ML370T01 server that I am trying to put in my "Round Hole" server rack. I don't have any rails and they are hard to find. I found someone selling this with the desription: 149068-B21 Compaq Genuine Tower to Rack Conversion Kit Proliant 1200 1600 2500
I have 2 pictures of the server and one picture of the "conversion kit" do you think it will work. I am not sure if mine is a 1200, 1600 or 2500 or something else.
Need some help please.
↧
↧
Raid driver NEED HELP!
Hi everybody!
I have a problem with finding the correct RAID controller driver for Windows setup.
Please heeeelp!!!
The photo of a server model in attachment...
↧
System Management Homepage - User cannot login (SMH 7.5.0, RHEL6.6, DL380g9)
Added user hpsupport using smhconfig. Also allowed root login by parameter "allow-default-os-admin = true".
Both still cannot login to SMH.
root is not permitted to login to server by sshd_config.
Anything else need to do?
DL380 Gen9
::::::::::::::
/etc/redhat-release
::::::::::::::
Red Hat Enterprise Linux Server release 6.6 (Santiago)
# rpm -qa|grep hp
hponcfg-4.5.0-0.x86_64
hpsmh-7.5.0-4.x86_64
hpssacli-2.20-11.0.x86_64
hpdiags-10.34.1914-1896.x86_64
hpsum-7.2.1-6.rhel6.x86_64
hp-snmp-agents-10.20-2789.26.rhel6.x86_64
hp-ams-2.2.0-1688.44.rhel6.x86_64
hp-smh-templates-10.2.0-1429.26.noarch
hp-health-10.20-1723.28.rhel6.x86_64
-------------------------------------
-------HP SMH Current Settings-------
-------------------------------------
admin-group = hpsupport
anonymous-access = true
box-item-order = status
box-order = status
config-level = Informational
custom-ui = false
ssl-cipher-suite = ALL:!ADH:!EXPORT56:!EXPORT40:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:-LOW:+eNULL
httpd-error-log = false
iconview = false
ip-binding = false
ip-restricted-logins = false
localaccess-enabled = true
localaccess-type = anonymous
log-level = debug
autostart = false
timeoutsmh = 30
port2301 = true
allow-default-os-admin = true
reject-prog-admin-login = true
ssl-cipher-suite = ALL:!ADH:!EXPORT56:!EXPORT40:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:-LOW:+eNULL
httpd-error-log = false
iconview = false
ip-binding = false
ip-restricted-logins = false
localaccess-enabled = true
localaccess-type = anonymous
log-level = debug
autostart = false
timeoutsmh = 30
port2301 = true
allow-default-os-admin = true
reject-prog-admin-login = true
rotate-logs = 0
rotate-logs-size = 5
session-maximum = 128
session-timeout = 15
trustmode = TrustByCert
ui-timeout = 120
user-group = sys
check-setup-integrity = false
-------------------------------------
# grep hpsupport /etc/passwd
hpsupport:x:500:500::/home/hpsupport:/bin/bash
↧
Proliant Gen9 & UEFI - Red Hat Installation
I faced difficulties when trying to install RHEL6.5 on DL380g9 with UEFI.
The difficulties are
a) The server cannot boot from a CD burned (bootable) with the ISO image. Error messages in red and black background.
b) Intelligent Provision did not recognize the RHEL ISO file.
c) Used a few USB burner utilities, the server still does not want to boot the the USB.
In the end, we found a utility called Rufus. Here what we did,
a) Burned with MBR for UEFI. The image did not boot.
b) Burned with GPT for UEFI. The image booted but it forced us to use GPT disk partition.
Any comments or anyone can share their experience with RHEL/CentOS installation in Gen9 servers?
Thanks.
719064-B21 HP DL380 Gen9 8SFF CTO Server 3
762768-L21 HP DL380 GEN9 E5-2687Wv3 FIO KIT 3
762768-B21 HP DL380 GEN9 E5-2687Wv3 KIT 3
726719-B21 HP 16GB 2Rx4 PC4-2133P-R Kit 36
768857-B21 HP DL380 Gen9 8SFF Cage Bay2/Bkpln Kit 3
768857-B21#0D1 FACTORY INTEGRATED 3
652589-B21 HP 900GB 6G SAS 10K 2.5in SC ENT HDD 36
719073-B21 HP DL380 Gen9 Secondary Riser 3
19076-B21 HP DL380 Gen9 Primary Riser 3
749974-B21 HP Smart Array P440ar/2G FIO Controller 3
726821-B21 HP Smart Array P440/4G Controller 3
↧
BL460C G6 - Fails to power-on
Hello,
Has anyone out there experienced a blade powering-on immediately as soon as it is attached to a C3000/C7000 enclosure?
The green LED iluminates straight away but I am unable to use the KVM/iLO in order to see why it fails to boot through to the BIOS.
I can see from the OA that it receives an iLO IP address and I can ping it although it drops out and then reconnects.
The OA also advises that it powers-off and then on again. The blade is reconditioned and should work. I will investigate further but does it sound like a dead blade?
Thanks in advance
Simon
↧
↧
Degraded State | HP ProLiant ML310 Gen3 v2 Server
HP ProLiant ML310 Gen3 v2 Server
The system health indicator (steady blinking amber) indicates the system is in a degraded state. Memory (memtest86), internal fans, and HDD's all pass diagnostic tests.
The server is under warranty.
I have gone through the HP documentation - what additional specific component tests should be performed to verify the cause of the 'dregraded state' health?
Thank you.
↧
Updating DL360G6 Storage Controller Firmware
Hello.
I've got a HP DL380G6 E5530 2.40 GHz running ESXi 5.5.0. Build 1623387.
ESX is currently giving a warning that the firmware for the storage controller is at 6.00.
So I'm trying to use SPP 0605.106 to update this to 6.64 which seems to be the current flavour. Specifically CP026508.
Initially I try this online but after an inventory it says everything on the node is current after adding this to the baseline.
I've tried a reboot on the grounds that maybe it was installed but not rebooted and applied. Still the same.
Next I've tried offline via the USB boot and chose interactive update.
It then seemed to hang on the HP splash screen with a cursor for an hour and a half.
I could see the activity on the drives changing, almost as if doing an inventory.
In the end I had to power off and restart as the maintenance window had passed.
Two questions.
Why would the inventory say all firmware is current?
Would it normally take longer than an hour and a half to run this offline?
There is an option to run this directly via command line on the server OS but the two options above would seem to be the obvious first choice.
Thanks in advance for your help.
Regards.
↧
HP ProLiant DL385 G7 w/ HP P410i SSD RAID 1+0 -> Windows 2012 R2 can't install
Hi Community,
i've got 3 HP ProLiant DL385 G7 Servers, which i want to merge to a Hyper-V 2012 R2 Cluster.
I installed 2 HP Enterprise SSDs (200 GB each) which are connected to the internal HP 410i controller. In the controller Software (ORCA) i created a "RAID 1+0" (RAID-1 was not available somehow) logical Volume and told the controller to boot from it. This worked so far and the controller recons the harddisks and says that the logical volume is "OK".
The servers Diagnostic Utility (F10) also states, that the boot volume is found, accessable and states everything as "OK".
So i bootet Windows Server 2012 R2 from the original DVD using a USB DVD-ROM Drive and started the installation. Windows then asks, to which drive to install and sees no drives. So i install the HP 410i driver from the HP website, which works properly. But still there are no drives recognized. Even if the controller driver is installed (obviousely working).
I've been told to create the RAID-volume using the SmartStart CD. I tried that, but the CD does not run from my USB DVD-Drive. The CD boots, shows a boot Screen with a HP Logo and some kind of loading progress bar. After that is finished it hangs at a black screen and nothing happens.
Do you have any ideas, what i am doing wrong and why Windows Server 2012 R2 does not see the logical volume although the controller and the server diagnostigs say, that everything is OK?
Is it the RAID 1+0 thing, maybe? (There doesn't seem to be a RAID-1 available in the controller setup tool ORCA; only Non-RAID, RAID-0 and RAID 1+0) I'm not sure what else to check.
Thanks a lot for your suggestions.
↧