Hi.
I have ML110 G7 server.
I would like to add SATA drive (its motherboard has 2 SATA ports).
I wonder if 4TB drive will work correctly.
(in my server there is fully occupied RAID, I am not going to change it, just new SATA drive).
Greetings
Hi.
I have ML110 G7 server.
I would like to add SATA drive (its motherboard has 2 SATA ports).
I wonder if 4TB drive will work correctly.
(in my server there is fully occupied RAID, I am not going to change it, just new SATA drive).
Greetings
Hi all,
after installing the latest SSP (2016.10) the SLES11 SP3 server (latest patch level) display the following message in the /var/log/messages log:
kernel: [ 3441.051052] qla2xxx 0000:07:00.1: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
I've tried to install the latest firmware for this HBA "HP StorageWorks 82Q 8Gb PCI-e Dual Port FC HBA" current firmware "7.03.00 (90d5)" (displayed in iLO)
#systool -av -c fc_host --> symbolic_name = "HPAJ764A FW:v7.03.00 DVR:v8.07.00.34.11.3-k"
The latest firmware for sles11sp3 is this one:
hp-firmware-fc-qlogic-2016.12.01-1.5.x86_64.rpm (which containing firmware 8.02.00)
Every time I install the rpm and execute ./.hpsetup
this message appear:
Loading references...done.
Performing discovery...
WARNING! : No supported adapters found.
Can anyone tell me what I do wrong?
Thanks!
Kind regards,
Nils
Hi,
We have somes server with ILO interface. All server has Advanced Licence. We want to manage all ILO interface from 1 console.
Is there any software to make this ?
Thank's in advance.
Sol-Info
I'm curious if i can expand a drive before the transform is completed.
example: i have a smart hba h240ar, i added an addtional drive to the raid via ssh
/opt/hp/hpssacli/bin/hpssacli ctrl slot=0 ld 2 add drives=2I:3:5 ( i just added a 5th drive to the logical raid)
it then transforms for about a day or 2 , then i expand the raid via
/opt/hp/hpssacli/bin/hpssacli ctrl slot=0 ld 2 modify size=max forced
Do i need to wait until the transform is complete before expanding the raid?
Hi All,
Is there latest 2.29 iLO 2 Firmware version cerified for HPE ProLiant G5 servers? I could not find ProLiant G5 models in the latest Service Pack for ProLiant (SPP) 2016.10.0 hence my doubts.
Did anyone notice problems with 2.29 iLO 2 Firmware applied to ProLiant G5 models (for example ProLiant DL580 G5) ?
Regards
Hi All,
Is there latest 2.29 iLO 2 Firmware version cerified for HPE ProLiant G5 servers? I could not find ProLiant G5 models in the latest Service Pack for ProLiant (SPP) 2016.10.0 hence my doubts.
Did anyone notice problems with 2.29 iLO 2 Firmware applied to ProLiant G5 models (for example ProLiant DL580 G5) ?
Regards
Saludos, hemos tenido problemas de reinicios inesperado con nuestro servidor y luego de hacer varias pruebas, entre ellas una de Stress (45 min) sobre las memorias, discos duros y CPU sin arrojar ningun reinicio consideramos que podria ser la fuente de poder que esta dando fallas repentinas en los voltajes, para realizar el cambio estamos considerando comprar la siguiente:
Link: http://www.coolermaster.com/powersupply/extreme/extreme-power-plus-650w/
Dicha fuente aplica para nuestro servidor?
De antemano muchas gracias por sus comentarios. Éxitos . . .
Hello-
I have a new HP Prolian DL308 Gen9 Storage server. I have a usb with the Windows Server 2016 Standard on it.
When I have the usb inserted into the port, it does see a folder stucture but it won't let me continue on. When I check the status it reads "generic usb device unrecognized". What am I doing wrong?
Thanks,
Kevin O -
hi. i write to your company from azerbaijan. can you help to our company. i have the problem about startup the booting from cd and usb drives
we can not rewrite the operation sistem. the order dont drive any hdds
I get this error with ML10 gen9.
P.S:This thread has been moved to a new thread.- Forum Moderator.
Hola compañeros tengo un incoveniente, estoy tratando de instalar Windows server 2016 en mi nuevo servidor HP Proliant ML350 Gen9, pero cuando ya reconece mi USB booteable y al pasar al siguiente paso me sale el mensaje de error "Windows not supported", ya actualice a traves de la herramienta de mantenimeinto los controladores, bueno eso creo porque cuando reincio el servidor y vuelvo a buscar actualizaciones me siguen saliendo como si no los hubiera instalado.
Alguien me puede ayudar con este tema, muchas gracias de antemano.
Hi all. My system product part/model : 837829-421
I activate intel amt and have control my system. All work fine but remote desktop mode screen blank. Connection established mouse and keyboard on remote system work but screen blank. I test with VNC Viewer Plus and MeshCommander. I can view screen Bios and post only in Serial-Over-LAN Terminal mode. I use internal graphics. card Skylake cpu. Please help me understand where i mistake ?
Status INTEL AMT from MeshCommander :
I just got a brand new DL20 Gen9 and put in the optional H240. After rebooting and disabling the B140I rebboting again then going into the SSA to configure the 4 x 12Gb/s 600Gb drives the card see's the drives with no problem but i get no create array options this is no matter what the mode HBA or RAID.
Not sure why if it see's the drives it will not give any options to create an array. Any help ot tips would be awesome.
Looking for drivers for this Fusion IO card offered by HPE: 831735-B21 HPE 1.6TB PCIe x4 RI HH Card (NVMe) for Win Server 2016 Hyper-v/S2D.
Do anyone have any suggestion?
Thx.
KEK
I know that this is an HPE branded card, but as far as I know this card should use the i40e driver under Linux.
I compiled the latest driver 2.0.19 found at sourceforge from Intel.
https://sourceforge.net/projects/e1000/files/i40e%20stable/
So the issues we are seeing..
First of all when the driver is loaded correctly and the interfaces turn up we do not get any traffic between the Debian server and the switch.
We don't even see the mac address on the switch in the remote end.
Secondly..
Sometimes when we boot the server the interface does not show at all, and some times only of them.I have noticed this error in kernel messages when this happen:
1.856937] i40e 0000:08:00.1: Initial pf_reset failed: -15
[ 1.856939] i40e 0000:08:00.1: previous errors forcing module to load in debug mode
So what could be wrong? Are we using the wrong driver..
One of the problems here is that HPE does not provide any official drivers for Debian/Ubuntu....
Thanks
/Jo Christian
HI, on a newly installed ProLiant DL380 Gen9 (Server 2012R2) I receive this error from IML:
PCI Bus Error (Slot 1, Bus 0, Device 2, Function 0)
Operating System failure (Windows bug check, STOP: 0x00000124 (0x0000000000000005, 0xFFFFE00126868028, 0x0000000000000000, 0x0000000000000000))
Server rebooted couple of times in last few days.
What device could casuse such a failure and Windows restart?
Hello there,
So I own a MicroServer Gen8 (to be exact: G1610T) and I use the ODD port to connect a boot SSD with Windows on it. It's working fine and I can boot it, but only as long as I have all 4 HDDs in the trays removed when booting the server, else it'll loop at the "Attempting to boot from C:" screen, then jumps to network boot and back again.
It seems the server is trying to find a boot section on the HDDs first, fails and skips the SSD on the ODD port entirely and jumps straight to the next boot device type in the list. Now here's the problem: I can't set individual drive priorities in the BIOS, only what type of device it should take first.
As example 1: HDD, 2: CDROM, 3: NIC.
But I can't set it like 1: SSD, 2: HDD1, 3: HDD2, etc.
Is there any way to fix this? I found that some people use the MicroSD slot with GRUB installed and use that to boot from the SSD but I don't want additional components which could potentially fail simply because HP missed out on including an important function which even cheap 30$ motherboards and other server manufacturers have...
Thanks already and best regards,
Stefan
i am using Proliant DL 380P Gen 8 , server 2008 R2. when i try top open wizard or configuration it shows an error. if you could help me out in this regard, please. images are attached herewith.
buongiorno a tutti
premetto che ho solo conoscenze sommarie di sw,
sono titolare di uno studio con un server e 5 pc client
il server è
HP PROLIANT ML310e Gen8 V2
il S.O. è windows server 2012 foundation ROK
Il server viene usato come file server e solo con il programma di contabilità (Ebridge di Buffetti) utilizza i 5 PC come client.
Quindi non è configurato nessun dominio
Il problema è il seguente:
se tengo acceso il server per più di 5 o 6 giorni consecutivi mi appare il messaggio :"controllo della conformità delle licenze non completato il server verrà arrestato dopo 9 giorni.
Ho provato a seguire qualche blog di MS relativo a questo problema, ma mi sono perso...,perchè non mi sembrava fosse la mia situazione (che mi sembra relativa ad una configurazione molto semplice)
di seguito le proprietà della sk di rete e del DNS:
protocollo internet versione 4
IP: 192.168.1.10
subnet mask:255.255.255.0
gateway: 192.168.1.8
DNS predefinito: 192.168.1.10
DND alternativo:8.8.4.4
Spero che qualcuno possa essermi d'aiuto.
grazie
pino