Quantcast
Channel: ProLiant Servers (ML,DL,SL) topics
Viewing all 10362 articles
Browse latest View live
↧

HP DL380 Gen9 RAID 5

December 7, 2017, 12:06 pm
$
0
0

Hi There,

For VMware esxi installation RAID5 is recommended. I have two controller in HP DL380 Gen9 server (Brand New).

In my server there are 16 SAS drives each 900 GB. Two controller P440ar which is embeded and one added P440.

During RAID configuration through SSA in intelegent provisioning, i could see only 8 drives under controller P440ar and remaining 8 drives from another bay under controller P440.

Is this a normal behaviour or each controller will show all 16 drives for array creation.

Normally how long does it take for array creation (RAID5).

BR///

Asim

↧
Search

DUAL PROCESSOR ADVANTAGES IN DL SERIES SERVER

December 7, 2017, 8:22 pm
↧
↧

I need help- sfp network card in dl360p g8 not working

December 7, 2017, 5:53 am
$
0
0

HI

I started my career as a network specialist 

Now I'm having a problem

I have a hp server DL360P WIth sfp  network card  I want to connect it with CISCO GLC-T SFP TO RJ45 module to an old switch with Mark zmc 10/100

When I connect cable directly to my laptop, everything works

But when I CONNECT the cable from the Cisco module TO switch or the  mikrotik or anything else it does not work and led network card  not turn it.

What should i do؟

I'm using the converter sfp to rj45 module type cisco GLC-T  I used under the image: 

[URL=http://www.upsara.com/][IMG]http://www.upsara.com/images/1yli_glc.jpg[/IMG][/URL]

The HP  Network Card is the image below

Please offer someone a solution

Thank you all

↧

BL460c Gen 9 Controller Boot Order in Legacy Mode

December 8, 2017, 5:14 am
$
0
0

 Hello Dear Sirs,

Can You kindly advise if there is option to set Controller Boot Order in Legacy Mode for BL460C Gen9? I have curions situation when Embedded RAID Controller has lower priority than external p420i. Can I have influence in this process? In G8 in RBSU there was option to have incluence on initialization process, but in Gen 9 this options is missing.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03264175

Any solutions?

↧

HP ProLiant ML150 Gen. 9 and LTO-3 Ultrium 920 drive

December 4, 2017, 4:44 am
$
0
0

Hello everyone,

 

I have  a question, our company is going to buy a new server soon, the HP ProLiant ML150 Gen. 9. We did use a LTO-3 Ultrium 920 drive on old server.

 

Does anyone know if the LTO-3 Ultrium 920 drive is compatible with the HP ProLiant ML150 Gen. 9 we'd would like to order?

Thanks in advance.

 

Regards,

 

Jordy van der Schoot

↧
↧

Where to find System software for DL360 G4p

December 8, 2017, 8:17 pm
$
0
0

I have a DL360 G4p that needed the system board replaced. I do not have any of the disks that came with the system. I used the original processor over again. It is a single Xeon 3.4GHz, 2MB Cache L2 processor. I am receiving “Unsupported Processor Detected. System will only boot ROMPAQ Utility. I cannot get to the BIOS Setup no matter what I try. Finding any support software is very poor at best. I got sent to a non-English site and if I try to download what I thought was the file I needed. I could not because I need a contract to access the file.  I am hoping someone could guide me through my issue.

Thank you,
 Ken.

↧

ProLiant DL380e Gen8 - Critical Temperature Threshold Exceeded (Temperature Sensor 46, Location Stor

December 10, 2017, 6:41 am
$
0
0

Hello all,

Need help dl380e gen8 giving me some issues. was hoping someone might have an idea. (Since its out of warranty.)

I have DL380e LFF with a 2slot read drive cage. couple times a day it gives me an error and reboots. Critical Temperature Threshold Exceeded (Temperature Sensor 46, Location Storage, Temperature 89C)

Been lookign for a couple months. I can't find anything to tell me where sensor 46 is. I believe is it on the rear facing 2 bay drive cage. If I disconnect the cables going to that circuit board, I no longer get the temp error. But i would like to use these 2 drive slots.

I would buy a new circuit board, but everywhere i can find, it comes int he whole kit. Wanting more then the server is worth. 

Thanks for any help.

Lou

 

↧

C-T-O DL360 G10 Crashing repeatedly Server 2016

December 10, 2017, 7:39 am
$
0
0
System is a Dl360 with dual Xeon Gold 5122, 192gb ram, 2x 600gb

Installed Windows Server 2016 Standard using Intelligent Provisioning. Despite IP asking me questions like time zone, network settings, admin password, none of that worked. When Windows setup booted it was like a normal bare metal install.

Then the crashing started. It crashed a few times during install, and crashes repeatedly now on the bench.

I've run the 2017-10 SPP, didn't help.

The error from ILo is "uncorrectable machine check exception in CPU 2"

ILo health status is showing CPU and Memory as "degraded"

The machine has reported this to HPE support but I haven't heard from them.

Since this is a CTO box I can't just return it for refund or can I? How can I trust this machine down the road if it was delivered with hardware faults?
↧
Search

ISO Windows Server 2012 Foundation

December 10, 2017, 11:52 am
$
0
0

Hello,

I have a costumer that the server HP Proliant ML110  G7 ransomware. I'd like to reinstall  the S.O., Windows Server 2012 Foundation ROK the client dont have the instalation CD. Where i can download ISO to reinstall the Operating system. I have the serial number of the server, and the key of the operating system.

Best Regards,

Bruno Barbosa

↧
↧

Missing package in SPP 2017.10 RHEL7 repository

December 5, 2017, 3:41 am
$
0
0

There is a missing package in the SPP 2017.10 RHEL7 repository. If you look into the filelist.xml file the following package is listed:

<package pkgid="5e6fdc6cf4d70a730197e62846b4f9c969962bf2" name="firmware-system-i36" arch="i386"><version epoch="0" ver="2.52_2017_10_25" rel="1.1"/><file>/usr/lib/i386-linux-gnu/firmware-system-i36-2.52_2017_10_25-1.1/.cpq_package.inc</file><file>/usr/lib/i386-linux-gnu/firmware-system-i36-2.52_2017_10_25-1.1/.hpsetup</file><file>/usr/lib/i386-linux-gnu/firmware-system-i36-2.52_2017_10_25-1.1/CP033722.xml</file><file>/usr/lib/i386-linux-gnu/firmware-system-i36-2.52_2017_10_25-1.1/I36_2.52_10_25_2017.signed.flash</file><file>/usr/lib/i386-linux-gnu/firmware-system-i36-2.52_2017_10_25-1.1/hpsetup</file><file>/usr/lib/i386-linux-gnu/hp-scexe-compat/CP033722.scexe</file><file type="dir">/usr/lib/i386-linux-gnu/firmware-system-i36-2.52_2017_10_25-1.1</file><file type="dir">/usr/lib/i386-linux-gnu/hp-scexe-compat</file></package>

 

It is also listed in the primary.xml:

<package type="rpm"><name>firmware-system-i36</name><arch>i386</arch><version rel="1.1" ver="2.52_2017_10_25" epoch="0"/><checksum type="sha" pkgid="YES">5e6fdc6cf4d70a730197e62846b4f9c969962bf2</checksum><summary>HPE ProLiant BL460c Gen9/WS460c Gen9 (I36) Servers firmware</summary><description>This package contains the HPE ProLiant BL460c Gen9/WS460c Gen9 (I36) Servers firmware</description><packager>Hewlett Packard Enterprise<Linux_SWdeliverables@groups.ext.hpe.com></packager><url>http://www.hpe.com/info/proliantlinux</url><time build="1508454116" file="1508454213"/><size archive="9574464" installed="9572882" package="6230005"/><location href="firmware-system-i36-2.52_2017_10_25-1.1.i386.rpm"/><format><rpm:license>2012 Hewlett Packard Enterprise Development LP</rpm:license><rpm:vendor>Hewlett Packard Enterprise</rpm:vendor><rpm:group>Applications/System</rpm:group><rpm:buildhost>bldeb6u3x64004.sde.rdlabs.hpecorp.net</rpm:buildhost><rpm:sourcerpm>firmware-system-i36-2.52_2017_10_25-1.1.src.rpm</rpm:sourcerpm><rpm:header-range end="427578" start="872"/><rpm:provides><rpm:entry name="firmware(hp:system:i36)"/><rpm:entry ver="2.52_2017_10_25" epoch="0" flags="EQ" name="firmware(hp:system:i36)"/><rpm:entry rel="1.1" ver="2.52_2017_10_25" epoch="0" flags="EQ" name="firmware-system-i36"/><rpm:entry rel="1.1" ver="2.52_2017_10_25" epoch="0" flags="EQ" name="firmware-system-i36(x86-32)"/></rpm:provides><rpm:requires><rpm:entry name="/bin/bash"/><rpm:entry name="/bin/sh"/><rpm:entry name="/bin/sh" pre="1"/></rpm:requires></format></package>

But this package does not exist. This breaks our repo-sync job, because it complains about wrong checksums (404 page instead of a rpm package). 

Please fix this.

↧

What is "FTSOPTIMIZE" during the Initial Setup of a HPE Gen10 server ?

December 5, 2017, 5:18 am
$
0
0

Hello, first time setting up a Gen10 server and during the initial setup of the Intelligent Provisioning I stumbled across 'FTSOPTIMIZE'.

I could choose one of these three options: FTSGENERAL, FTSFILE, FTSVMWARE

and had these two sliders below: FTSENABLEF10 and FTSENABLEFW

So I figured out that FTSENABLEF10 will enable/disable the 'F10' key used to get into the Intelligent Provisioning during startup. However, I have no idea what any of the other options is supposed to do. I consulted the "Intelligent Provisioning User Guide for HPE ProLiant Gen10 Servers and HPE Synergy" but the words 'FTS' isn't even in there. In the chapter for the initial setup it simply reads :

6. Automatically optimize your server.

Google was unexpectedly unhelpful, and even searching on the HPE site returns no results. What is this option supposed to do ? What option am I supposed to choose ?

Thanks for the help

↧

DL360 gen9 not booting Red hat linux

December 11, 2017, 1:08 am
$
0
0

Dear Team HPE,

I am a technician beginner, have found the problem of DL360 Gen9 before changing systemboard OS Red hat boot, but after i replace systemboard OS red hat enterprise linux not boot, UEFI Boot order not appear Red hat
whereas the steps that I do
1.reinsert SN and Product ID, set date and time
2. choose UEFI Mode


may be helpful for setting the BIOS Boot Red hat, but the server position is now in the customer,

 

 

↧

DL360 gen9 not booting Red hat linux

December 11, 2017, 1:08 am
↧
↧

Drivers fot ProLiant MicroServer Gen10

December 11, 2017, 6:20 am
$
0
0

Hi, I'm trying to find the drivers for the graphic card of HPE ProLiant MicroServer Gen10 but II can't find it.

The O.S. is HPE Microsoft Windows Server 2012 Foundation and it installs automatically all the drivers except this one. Tried with the automatized detection of amd drivers but it fails.

¿Any idea?

Thanks

↧

ILO 5 Alert problem with sender mail adress

December 11, 2017, 9:52 am
$
0
0

, here is my problem: I'm using ILO5 Firmware 1.10 and I'm trying since ours to configure alert mail with my Exchange. ILO 5 is sending the alert mail, but my exchange could not accept ist, because the sender-mailadress (generated by the ILO) is in a wrong format like testman.@abc.de. I got that information from the log-file of my exchange-server. There's no way to delete the "." in front of the @. I tried different host-names an sender domains, but it's still the same problem. 

Thanks for your help!

↧
Search

HP Proliant DL360e Gen8 Intel Speed Step

December 11, 2017, 10:04 am
$
0
0

Hallo,

ich bin verzweifelt auf der Suche wie ich im BIOS bei einem HP DL360e Server die Intel Speedstep Technology deaktiviere.

Geht das gar nicht oder finde ich es nur nicht.

Bin für jeden Tipp dankbar!

LG
Christian

↧

3rd Party eSATA Controller Card Not Recognized

December 11, 2017, 10:46 am
$
0
0

New ML350 G9 E5-2620V4 Xeon CPU,  Windows Server 2016 Standard installed.  Hot plug drives include (2) SAS Raid 1 drives for OS and (4) SAS Raid 10 drives for data.  This machine has replaced our aging 2008R2 server and all has been good with the exception of not being able to utilize our existing 5 drive external SATA drive tower.  I purchased a Addonics AD4ES6GPX4 PCI card which according to the mfg, will work in x4, x8 or x16 PCI slots.  After the successful installation of the OS, the device is not listed in the Windows device manager nor are the 5 data drives displayed in the hard drive resources.  These are configured simply as JBOD drives and used to store client backup files.  I do not know if this is an issue with Windows Server 2016 or if it is an issue with the system board not supporting the card.  Mfg states that it should work but may have to wait until Microsoft releases additional updates for drivers.  Apparently, according to Addonics, the controller card utilizes the built-in Windows AHCI driver but I simply cannot get it to be recognized.  Any ideas?  HP support will not address this due to it being a 3rd party controller.

↧
↧

DL360 G7 Memory Configurations - Mixing DDR3 and DDR3L

December 11, 2017, 11:51 am
$
0
0

Hi all,

My DL360 G7 are now having 2GB ECC RDIMM * 4 + 4GB ECC RDIMM * 2, so total 16GB RAM spread across all channels (dual CPU installed), one DIMM per channel, all dual ranks, standard voltage DIMMs.

I want to add more RAM to my sever. According to the following page, for 2 DIMM Per Channel (That's the only option for me as I already have 6 RDIMM installed), Dual-Rank 16GB RAM will run at 1333MHz for Standard Voltage, or 1066MHz at Low Voltage.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02208506

Now, I want to keep my memory speed at 1333MHz, am I only allowed to purchase Standard Voltage 16GB 2R ECC RDIMM? Or I can still buy the low voltage one as I have standard voltage RDIMM shared in the channel (LV RDIMMs should still able to operate at 1.5V standard voltage)? Or there is option in RBSU that I can force the new LV RDIMMs to run at Standard Voltage to achieve 1333MHz?

Thanks.

 

↧

HP SPP 2017.7.2 or 2017.10 on Oracle Linux 6.9

December 7, 2017, 1:55 am
$
0
0

Hello Dear Sirs,

I experience problems with applying of HP SPP on Oracle Linux 6.9 using HP SPP 2017.7.2 or most recent HP SPP 2017.10 ISO P- 01456_001_spp-2017.10.1-SPP2017101.2017_1027.10.iso

 Smart update service considers Oracle Linux 6.9 as not supported system. Please find below scouting log below:

[INFO] :: Dec-06-2017 06:34:39:573 pm :: [userlogger.cpp:206] :: Opened log /var/log/sum/localhost/sum_log.txt

[INFO] :: Dec-06-2017 06:34:39:573 pm :: [userlogger.cpp:206] :: Opened log /var/log/sum/localhost/sum_detail_log.txt

[INFO] :: Dec-06-2017 06:34:39:573 pm :: [scoutnode.cpp:187] :: Scouting type of node - [localhost].

[INFO] :: Dec-06-2017 06:34:39:573 pm :: [scoutnode.cpp:405] :: Getting list of node types to scout.

[INFO] :: Dec-06-2017 06:34:39:573 pm :: [scoutnode.cpp:481] :: Getting node type LINUX scouting object.

[INFO] :: Dec-06-2017 06:34:39:573 pm :: [linuxnodetypescouting.cpp:108] :: Started Linux node type scouting for ipAddress localhost.

[INFO] :: Dec-06-2017 06:34:39:573 pm :: [linuxnodetypescouting.cpp:122] :: Detected local linux node.

[INFO] :: Dec-06-2017 06:34:39:597 pm :: [linuxnodetypescouting.cpp:1246] :: System model is: ProLiant DL380 Gen9 [INFO] :: Dec-06-2017 06:34:39:597 pm :: [linuxnodetypescouting.cpp:1201] :: Server generation is: 9 [INFO] :: Dec-06-2017 06:34:39:597 pm :: [linuxnodetypescouting.cpp:1270] :: Retrieving OS details for local system [INFO] :: Dec-06-2017 06:34:39:657 pm :: [linuxnodetypescouting.cpp:1345] :: oraclelinux-release-6Server-9.0.3.x86_64

[ERROR] :: Dec-06-2017 06:34:39:718 pm :: [linuxnodetypescouting.cpp:1447] :: Could not match the OS to one of the expected:  oraclelinux-release-6Server-9.0.3.x86_64

Can You kindly clarify why Oracle Linux 6.9 is not applicable for most recent support packs? In 2017.04 on Oracle Linux works like a charm . Why "support" it is dissapear now?

Thank You in advance.

↧

Missing Component in HP Insight Management

December 11, 2017, 8:32 pm
$
0
0

ntmysjrdp01.PNG

 

Pictured above is one of the HPE ProLiant DL380 G7   , HP SIM and below is another Proliant (same model). 
makulntd02.PNG

 

I believe that I am missing some drivers/software for this. Unfortunately the software center is not that friendly enough for me to decipher what I am missing.

For the server which has missing components runs on WIN 2012 R2. 

Much love if a kind chap could point me to the right software/driver to install

↧
Viewing all 10362 articles
Browse latest View live
Search