Question on HPE OneView 4.0. The service account that is pushed to all the iLOs (_HPOneViewMonitor): can that password be changed or maintained by the Admins in OV? Or is it secure & scrambled by OV? How secure or easy to crack is it?
↧
OneView 4.0 - modify password for _HPOneViewMonitor?
↧
HP Proliant DL380 G7 Power Supply Unit problem
Hi there forum, I really don't know where to ask this, so i'll just do it here.
So I have two PSUs for HP Proliant DL380 G7, both exactly the same:
https://photos.app.goo.gl/9qW7neHrE1Ibptn83
One of them doesn't want to fit in any of the two PSU slots. It just won't go all the way in (it won't snap). I compared them both carefully and nothing seems to be different or bent even the slightest. The one that doesn't "fit in" has this missing bronze thing, that I pointed out with red arrow on the picture linked above. Speaking of this bronze thing, I also want to know what is the purpose of it? Is it needed?
By the way, model of the PSU is: HSTNS-PL14 (460W)
↧
↧
Contact DL 380 Gen9
Hi, Team
Memory upgrade planned for current DL380 Gen
If you know the Memory Part Number, ILO is not set
How to check the memory part number without shutdown in this state↧
ProLiant DL360 Gen10 mib file
Hello
Tell me where to find the mib file for monitoring ProLiant DL360 Gen10 ?
the only thing I can get:
[root@-zbx admin]# snmpwalk -c ovms1 -v2c ip_address
SNMPv2-MIB::sysDescr.0 = STRING: Integrated Lights-Out 5 1.15 Aug 17 2017
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.232.9.4.11
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (5031) 58 days, 21:18:41.31
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING: ILOCZJ74505XB.
SNMPv2-MIB::sysLocation.0 = STRING: OVMS-01
it is not enough!
It is necessary to control a lot of other parameters (temperature, speed of rotation of the cooler)
thank
↧
HP Dataprotector GRE and Vcenter 6.5 appliance
Hi
Is HP Dataprotector GRE compatible with Vcenter server 6.5 appliance ?
BR
Elefanten
↧
↧
Replace SmartArray P840 in DL380 Gen9, not picking up raid configuration from the disks
Dear Sirs/Madams,
I have a customer who logged a case with HPE, because his cache module is failed according to iLO4.
However, HPE has been onsite at least twice now with a replacement p840 array controller, but each time the controller is replaced, it does not pickup the raid configuration from the disks (they have two luns)
The new array controller has been flashed with the latest firmware.
Its an important server, so downtime has to be kept to a minimum, and each time the controller has failed to be replaced, we have put the old controller back into the server, and then ofcourse the raid config is back again.
What can one do in this scenario?
Br
Patric
↧
Tape Drive shows 4 times in Device Manager
Hello we connected a tape drive VIA SAS and its showing up as 4 devices in device manager. Any idea why?
↧
HP USB KEY UTILITY cannot process SPP-2018-03
Hi,
I am trying to write P05006_001_spp-2018.03.0-SPP2018030.2018_0226.84 to a USB Stick.
I am using HP USB Key Utility 2.1 on Windows 10.
I get an error "hpusbkey.exe has stopped working" (see screenshot below)
I tried with P03093_001_spp-Gen8.1-SPPGen81.4 and with 871795_001_spp-2017.04.0-SPP2017040.2017_0420.14 and they both worked perfectly from the same PC using the same copy of HP USB Key Utility.
I checked the MD5SUM of the 2018 ISO and it was fine.
Has anyone managed to successfully use HP USB Key Utility 2.1 to create a bootable USB Stick with the laetst SPP? (P05006_001_spp-2018.03.0-SPP2018030.2018_0226.84)
Is there anything else I could try?
↧
conrep.exe don't generate xml file with save parameter .
hello,
I'm working on DL360 gen9 server and MDT. I need in winpe phase to configure bios with conrep . (no ilo card)
hpsstkio.sys is on windows/system32/drivers
i write conrep -s -xconrep.xml -f filename.xml
the command work but no filename.xml is generate . I ha ve tried later when os is installed and the same happen .. no export .. no error message .
I don't understand what happen ..
In the same time a try with ilorest.exe wich actually working only when os is installed .. i can't force ilo chif driver to be installed in winpe phase . i have no ilo card so i think i must use conrep ..
thanks you for your helping, i'm getting mad
↧
↧
ML 350 G6 Proliant server error 1615-Power supply failure or Power supply unplugged in Bay 2
Hi..
I having some issue with my HP ML 350 G6 Proliant server. The issue like the subject.
Post Error - Message : 1615-Power Supply Failure or Power Supply Unplugged in Bay 2
Post Error - Message : Power Supply Solution Not Fully Redundant
LED at Bay 1 green, at Bay 2 off. I've try to switch/swap AC cable, problem remain the same. Changing the cable with new one, problem remain the same.
And the, I swap/switch the PSU at Bay 2 with PSU at Bay 1. LED at Bay 2 is green and at Bay 1 remain off. Do the same with the cables, but problem remain the same.
Any idea to solve that issue?
P.S: Iam in Indonesia, and don't have a new part for replacement to check it's the PSU or other part is the causes.
↧
Update DVD for old G5
Hi Guys,
im looking for the latest availible SUMM-DCV for my old G5.
I found the old server in the basement, its running and i want to use it as test-system.
I try it to update with the latest SUM, but it didnt found and update-able items.
Do somebody know which is the latest working SUM-version for an old G5 and can provide me it ?
Thanks from Germany
Marco
↧
proliant 360 g6 + x5680 not start
Hello.
I have: hp proliant 360 g6 and x5680
I updated from e5645 BIOS to the latest version and through SPP 10.16 (the latest SPP for Proliant g6) all to the latest versions. Further I insert x5680 but the server does not start, the speaker constantly peeps. What to do?
↧
D3610 Storage Enclosure Visio?
Anyone know where to find the visio stencil for the Proliant storage enclosures? I am looking for the D3610.
Thank you!
↧
↧
Adding a SAS hard disk drive in HP Proliant Server with other hard disk drive that is running
Please a need help I have a HP Proliant Server 360 Gen 9 and I need to add a new SAS hard disk drive and then I need to configure again with the array controller for the mirror 1 but the main problem is that this HP Proliant is running with another disk drive,I need to say I have one disk working and I have another new disk but I need to put this new disk with the mirror configuration,please could you help me,thanks very much I hope a answer
↧
boot from ssd
I have a Proliant ML330 G6 with two discs in mirror Raid, with the P410 controller. It runs ubuntu 16.4, and it is working fine.
I wanted to leave the raid, only as data files, and install a Samsung Evo 850 SSD in the SATA1 port with the system.
The problem I have is that I can not get the BIOS to recognize it as a boot disk. In any other computer, it starts perfectly.
From Bios I have this configuration:
- PCI Device Enable / Disable menu -> are both enable.
- Standard Boot Order (IPL) menu -> Option 4, Hard disk.
- Boot Controller Order menu: -> embebed Pci sata controller.
But when I press F10 to exit. It always warns me that the default boot is P410.
Once the system is running, I can access the SSD, without problems. Is there something wrong, or what can I do?
↧
Unable to connect to ilo4 with the remote console
Hello everyone, I wanted to ask for advice on the following problem, I have a ProLiant DL380 Gen9 server before making the SPP "P05006_001_spp-2018.03.0-SPP2018030.2018_0226.84", I could connect to the server with the remote console of ilo4 without anyproblem, now after the update, I connect to the remote console of ilo4 but in the java window after the word "connected", at the bottom left, after a few seconds I see the words "no video", and I can not interact with the system, what happened to you? And yet I opened all the right doors on the firewall, ie 17990, 17988, 443
Waiting for your kind advice, thank you.
Waiting for your kind advice, thank you.
Antonio.
↧
ProLiant ML150 G6 - Partition Failure
Got a recycled server from my university. It's functional, but they removed the hard drives before resale. I replaced one of the hard drives with a 1 TB SATA hot swap. I attempted to use the hp proliant ml150 g6 easy setup cd, but when I was in the final step I received an error:
"partitioning has failed unable to continue could not update disk mbr code"
I have not done anything else to the server apart from booting with the cd. Currently though, the server indicates that the hard drive that I replaced is in slot 8. However, this would normally be perceived as slot 1 in the hot swap rack.
Any information would be helpful, specifically why my system is failing in partition.
↧
↧
Service Pack Proliant
Hi, last week we bought a Proliant ML30 Gen9. We've got problems installing Server 2016 Essentials. At the end we reset the server to it defaults values and installed Windows Server without Intellingence Provisioning.
Now all it's ok, but I want to install the Service Pack for Proliant, because there are some devices with warnings. We've created a bootable usb but it fails.
I search the drivers in the web of hpe, but I don't know exactly what to download.
Can anybody help me how to install SPP or where I can download all the drivers?
Thanks
↧
Custom SPP Creation
When I create a custom SPP and filter to a specific operating system (say VMware 6.5 for example) and I inherently excluding the ability to perform offline firmware updates. Or, in other words, are offline updates always included in a custom SPP build? Thank you, Brian.
↧
Intelligent Provisioning to backup operating system
Has anyone used the scripting capability in Intelligent Provisioning to make a backup of the operating system and then later use its scripting capability to restore it?
↧