I have followed the guide https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05088241 and setup urlboot for a moonshot cartridge, however when I go to the UEFI Boot options or Boot Once the Url File entry is not shown. Is this feature not fully supported o the Moonshot or is there something missing from this doc?
↧
Urlboot from a Moonshot cartridge
↧
ML110 G7 motherboard front panel connector
Hi,
Does this motherboard also have traditional front panel connector pin outs (power button, leds etc.) to be used in a non-HP branded case?
Thanks
↧
↧
hponcfg ERROR: iLO User authentication failed
Trying to reset an iLO password. System is running RHEL 7.4 and I am logged on as root. Simply running hponcfg -w out gives the above error. I thought running hponcfg as root was supposed to bypass login? Any ideas? This is a DL560 G10 with hponcfg 5.4.0.
↧
DL360P GEN8 cannot boot when smart array set to RAID mode, but HBA mode can boot normally
Hi all,
I have one DL360P GEN8 and already update to latest firmware include system ROM, iLO4, smart array, NIC, etc.
but now my server cannot boot when smart array set to RAID mode, but HBA mode can boot normally.
It will stuck in smart array P420i screen.
I can create array in SSA, but when i create logical unit it fail.
Anyone can help me? Thanks
↧
HP Proliant ML350p Gen8 max number of Media Bay Kits
I understand it is indended to equip one (1) additional Media Bay Kit in case another one or two optical or tape drives (5.25") are required. However, I intend to populate the 5.25" bays with high-density SFF hotswap bays. I require 5 external 5.25" bays. Is it possible to install a total of two (2) Media Bay kits to accomodate my needs? Thanks a lot!
↧
↧
General OS installation (manually)
I have both an ML350 G6 tower and DL320 G5p rackmount servers. I do not know how to install an OS manually on either of them. I have never used an HP server before, only Dell. I would like to install Ubuntu Server 18.04 or Windows Server 2016 but it ignores CDs and USB boot drives. I won't use SmartStart because it only allows older OSes. I've seen 2016 Server installed on the ML350 G6 before, but no explanation as to how.
↧
HPE DL20 Gen10 - Storage Options
Dear community
I have some questions on the HPE DL20 Gen10 storage options:
1) There is the option to configure a modular smart array controller which does not occupy a PCIe slot such as E-208i-a SR or P408i-a SR. What happens if both PCIe slots on the riser are populated in addition to the modular smart array controller?
Intel E-2100 processors only have 16 PCIe lanes to the CPU which are already covered by both PCIe slots (each is x8 wired). Is one of the PCIe slots disabled if the modular smart array controller is in place, or is the controller connected via the C242 chipset (and not directly to CPU)?
2) There is the option to use a M.2 nvme ssd in the respective mainboard slot. The data sheet says that it is PCIE x2 wired, Is it connected directly to the CPU or connected via the C242 chipset?
Thanks for clarification
Christian
↧
Getting "Logical Drive error IO fatal error" in RIS Event Log
Hi
After we changed 1 faulty harddrive in a raid (Smart Array P400 in ProLiant ML370 G5 ) we started getting "Logical Drive error IO fatal error" in RIS Event Log. I cannot find any more details, all physical drives are fine, no system status errors. at the same time I see disk warning event 153 in Windows System log.
Any ideas what might be the problem and how to sort it?
Thanks
↧
Getting "Logical Drive error IO fatal error" in RIS Event Log
Hi
After we changed 1 faulty harddrive in a raid (Smart Array P400 in ProLiant ML370 G5 ) we started getting "Logical Drive error IO fatal error" in RIS Event Log. I cannot find any more details, all physical drives are fine, no system status errors. at the same time I see disk warning event 153 in Windows System log.
Any ideas what might be the problem and how to sort it?
Thanks
↧
↧
HPE Fast Fault Tolerance Memory Configuration with ML 350 G10
I would like to use HPE Fast Fault Tolerance with a new ML350 G10 with DUAL Intel Xeon 3106 processors. Right now I have eight 16GB Dual Rank memory modules specified (four per processor). I have studied the Memory RAS Technologies document here,
https://psnow.ext.hpe.com/doc?id=4aa4-3490enw.pdf
It says, "There must be a minimum of two ranks on each populated channel. Furthermore, only HPE SmartMemory in x4 organization can be used. "
I don't know what "x4 organization" means. I also went to the memory configurator, but it only shows you how to populate the server memory with no consideration for fault tolerance.
Any help would be appreciated.
↧
The cache for Smart Array P410i in Embedded Slot is disabled because one or more attached batteries.
Hi all
i have just spend a lot of mony on new bigger disc.
Then i can expand disc cuss BAT is broken.
I have bye new bat and cabels.
Now i have the problem: The cache for Smart Array P410i in Embedded Slot is disabled because one or more attached batteries are not supported by the currently running firmware.
Controller Hardware Information
Controller Smart Array P410i
Slot 0
PCI Address (Domain:Bus:Device.Function) 0000:05:00.0
Hardware Revision C
Controller Serial Number 5001438013A867B0
Firmware Version 6.64
Number of Ports 2 (Internal only)
Controller Memory Module Size 256 MiB
Battery/Capacitor Pack Count 1
plz help me out here.....
Cheers
Jimmy
↧
Smart Intelligence [F10] Prompt Missing In setting Setup [F9] Bios.
I had an event with my ProLiant DL60 Gen9 servers that I cannot explain. Hopefully someone can help explain.
I want to make Window2012R2 installation on my server using [F10] Smart Intelligence, when I noticed that Smart Intelligence [F10] Prompt Lost during POST. I'm trying to enter Setup bios [F9] to enable Smart Intelligence Allocation, but the settings for ENABLE / DISABLE disappear from the menu list. How do I make it?
How to FIx This Problem.
Thanks.
↧
how to start a server with one processor?
For the test I need to run the server with one processor. How to do this? HP Prolian DL380 Gen10 Server. When I pull out the processor, the power is not supplied. Can be pull out memory modules?
↧
↧
Disable network card using ilorest
Hi!
I'm trying to automate our physical servers installation process. I'm playing around with the ilorest tool and managed to get my machine's network interface status:
# /usr/sbin/ilorest list Name "PhysicalPorts/MacAddress" --selector=NetworkAdapter
iLOrest : RESTful Interface Tool version 2.4
Copyright (c) 2014, 2019 Hewlett Packard Enterprise Development LP
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Name=HPE Ethernet 1Gb 4-port 331i Adapter - NIC
PhysicalPorts=
Status=
State=Enabled
PhysicalPorts=
MacAddress=C4:34:AA:AA:AA:00
MacAddress=C4:34:AA:AA:AA:01
MacAddress=C4:34:AA:AA:AA:02
MacAddress=C4:34:AA:AA:AA:03How can I enable/disable a network card or network interface using ilorest? I've seen some examples using the APIrest (coding in Python, for example) but I would like to avoid to code something from scratch when we already have a tool available.
↧
DL360:BMC IPMI Watchdog Timer Timeout: Action=System Power Reset, TimerUse: 0x44, timerActions: 0x01
Hi ,
I am facing server restart issue with ProLiant DL360 G7 Server. ALl 4 DL360 Servers in same network have similar restarts. Sometimes all 4 servers restarts at same time.
iLO Log has below information:
BMC IPMI Watchdog Timer Timeout: Action=System Power Reset, TimerUse: 0x44, timerActions: 0x01
Watchdog reset on smif_domain, pc 01780a28, sp 0000ec98.
Software Information:
Server has Centos release 5.11 (Final) installed.
iLO Firmware Version 1.82 Jan 15 2015
BIOS Version : P68
↧
SUM 8.4.0: smartupdate requires does not provide all relevant hdd, smartarray, powerpic, ...packages
Hello,
since version 8.4.0 SUM no longer provides all required packages for hdd, powerpic, sas, sata and smartarray firmware updates when calling smartupdate requires.
version <= 8.3.7:
[root@server ~]# smartupdate requires firmware(hp:system:p89) firmware(pci:v0000102Bd00000533sv0000103Csd00003381bc*sc*i*) firmware(pci:v0000103Cd00003239sv0000103Csd000021C0bc*sc*i*) [...] firmware(pci:v00008086d00008D44sv0000103Csd00008030bc*sc*i*) firmware(pci:v00008086d00008D7Csv0000103Csd00008030bc*sc*i*)firmware-hdd-* firmware-powerpic-* firmware-sas-* firmware-sata-* firmware-smartarray-* hp-firmware-hdd-* hp-firmware-powerpic-* hp-firmware-sas-* hp-firmware-sata-* hp-firmware-smartarray-*
version = 8.4.0
[root@server ~]# smartupdate requires firmware(hp:system:p89) firmware(pci:v0000102Bd00000533sv0000103Csd00003381bc*sc*i*) firmware(pci:v0000103Cd00003239sv0000103Csd000021C0bc*sc*i*) [...] firmware(pci:v00008086d00008D44sv0000103Csd00008030bc*sc*i*) firmware(pci:v00008086d00008D7Csv0000103Csd00008030bc*sc*i*)
[missing hdd, powerpic, sas, sata and smartarray packages]
We use yum install $(smartupdate requires) for installing all required firmware update packages before we actually apply them with smartupdate upgrade. With 8.4.0 all hdd, powerpic, sas, sata and smartarray firmware updates will we skipped.
Apart from the fact that the variant with the wildcard packages (e.g. firmware-hdd-*) was not the best variant before, because countless irrelevant packages were installed, but at least the necessary packages were also installed.
↧
Installing Windows Server 2016, We couldn't create a new partition or locate an existing one
Installing Windows Server 2016, We couldn't create a new partition or locate an existing one
What I can do to fix that.
HP Proliant ML110 G7
↧
↧
Installing Windows Server 2016, We couldn't create a new partition or locate an existing one
Installing Windows Server 2016, We couldn't create a new partition or locate an existing one
What I can do to fix that.
HP Proliant ML110 G7
↧
DL360 G9 - unable to update BIOS, iLO communication errors
I have a DL360 Gen9 that is being a royal pain. Current primary ROM is 1.50, backup is 2.50. I cannot boot from 2.50 - when I try, it hangs at 24% and never finishes POST so that ROM is effectively useless. When I boot 1.50, it can't communicate with iLO (iLO FW Communication Issue - Unable to communicate with iLO FW) and I can't access iLO via the network (although it does seem to grab an address via DHCP...). When I try to update the firmware via RBSU or UEFI (fwupdate), I get an immediate red screen of death (x64 exception type 0d - general protection exception) with various firmware versions. If I try from within SPP or CentOS, it fails with "Unable to initialize the iLO Channel interface". I cannot get Windows to install - it either hangs while loading or gives me a red screen of death, depending on version. I've tried clearing NVRAM via system switches. I've tried reseating all RAM, removing all cards (HBA, NIC, etc), power cycles, etc. Any other ideas or things to try? Is there a way to wipe the backup ROM?
↧
Booting from pcie m.2 ssd on ml30 g10
Hey guys, thank you in advance for your insight,
I'm wondering if I can manage to install an m.2 nvme card with a pcie adapter and boot from it on ml30 gen10.
For example using m.2:
-Samsung 970 EVO 2TB - NVMe PCIe M.2 2280 SSD (MZ-V7E2T0BW)
Or Sabrent 2TB Rocket NVMe PCIe M.2 2280 Internal SSD High Performance Solid State Drive (SB-ROCKET-2TB)
Using pcie adapters:
-EZDIY-FAB PCI Express M.2 NGFF PCI-E SSD to PCIe 3.0 x4 Host Adapter Card with Heatsink Cooler- Support M.2 PCIe (NVMe or AHCI) Type 22110,2280, 2260, 2242
I'm wondering if I can manage to install an m.2 nvme card with a pcie adapter and boot from it on ml30 gen10.
For example using m.2:
-Samsung 970 EVO 2TB - NVMe PCIe M.2 2280 SSD (MZ-V7E2T0BW)
Or Sabrent 2TB Rocket NVMe PCIe M.2 2280 Internal SSD High Performance Solid State Drive (SB-ROCKET-2TB)
Using pcie adapters:
-EZDIY-FAB PCI Express M.2 NGFF PCI-E SSD to PCIe 3.0 x4 Host Adapter Card with Heatsink Cooler- Support M.2 PCIe (NVMe or AHCI) Type 22110,2280, 2260, 2242
↧