Quantcast
Channel: ProLiant Servers (ML,DL,SL) topics
Viewing all 10362 articles
Browse latest View live
↧

DL360 G7 pre-POST Problems, accidental short. (Solved, Ish)

September 8, 2019, 11:35 am
$
0
0

Hi all.

So i got this DL360 G7, and after a year of the mind numming drone from the server, I decided to convert it to a tower server and slap in some watercooling.

All went surprisingly well, until i had to extend the SAS backplane power cables, where i accidentaly reversed the wires and shorted something. (I have fixed the cable corectly now btw)

Now the Health LED flashes Red and nothing on the SID, Starting the system powers it up for a second and goes to standby again, and does this no matter the config, except when no cpu's are present., the fans also spin up for a hot second.

I have exhausted the manuals and flow-charts and the only info that has given me, is that theres a System Board Fault.

So i was wondering if theres any Debug tools or a pinout for the SAS Power cable? i suspect i killed a voltage regulator or something, on the SAS Power Cable im getting 2xGND 1x12v 2x3.3v and a 2.8v??? is the 2.8v correct or should it have been 5v maybe?

INFO

DL360 G7 2x X5650 maxed out with 192GB RAM (Motherboard 602512-001) 2x 460W PSU's (505908-001 Controller)

Also, this is a secondhand server i got from a school, and being 18 i don't have the money to spend on a new motherboard, so im willing to fix the board myself, and i do have good experience in THT and SMT Soldering.

Hope you can help me

Best regards - Gustav K. Andersen

SOLUTION

So I ended up finding a good price on a refurbished Board. and then il'll keep the other board for spares i guess.

↧
Search

HPE Proliant ML30 - the processor Core Disable = 1 and VM ESXi 6.5.0 work again CPU ?

September 8, 2019, 7:30 pm
$
0
0

Dear All,

my Server is HPE Proliant ML30 Gen 9.

it turn to PSOD after running 2 years.

Host OS is ESXI 6.5.0 

RAM 64G, in each 16G in 4 slot 

CPU xeon E3-1240v5 

-------------------------------------------------

check IML:

Uncorrectable Machine Check Exception (Board 0, Processor 0, APIC ID 0x00000006, Bank 0x00000000, Status 0xBD800000'00000006, Address 0x00000000'00000000, Misc 0x000007FE'8A97D000)

And when i change core diable in BIOS from [0] to [1]

the host run back.

Question:

- CPU broken or not, do i need to replace cpu?

- can i run the host as normal with this situation?

- why i change the processor core diable = 1 per socket the host OS work again as CPU not failed?

-  what is the meaning of the processor core diable?

Too many questions ?, thanks all for your time?

↧
↧

no eligible disk found : hp, dl380 g10

September 8, 2019, 9:47 pm
$
0
0

bonjour,

j'ai un probleme avec la detection des disques dures avec ce serveur ,

card raid : HPE SMART ARRAY P408I-a SR GEN10 : ACTIVé

HPE SMART ARRAY S100I SR GEN10 : Desactivé

disque : 10 k sas ds 300gb 872735

malgré ça je reçois le message :NO ELIGBLE DISK FOUND AU MOMENT DU CONFIGURATION D'un array.

merci pour votre soutien.

Google Translate:
I have a problem with the detection of hard disks with this server,
card raid: HPE SMART ARRAY P408I-a SR GEN10: ON
HPE SMART ARRAY S100I SR GEN10: Disabled
record: 10 k sas ds 300gb 872735
in spite of that I receive the message: NO ELIGBLE DISK FOUND AT THE TIME OF CONFIGURATION OF an array.
Thank you for your support.

 

 

↧

Can you install Proxmox on an HP DL380p Gen8?

September 5, 2019, 11:00 pm
$
0
0

Hallo Leute,

ich habe einen HP DL380p Gen8 und würde am liebsten darauf Proxmox installieren um die eingebuaten Grafikkarten ( RTX 2070, Radeon) an eine  Windows 10 VM durchreichen damit ich in Blender diese verwenden kann. Aber irgendwie will das nicht so wirklich funktionieren.

Jemand eine Idee wie man das machen muss ? für eine Anleitung wäre ich sehr dankbar.

Google Translated

Hi folks,

I have a HP DL380p Gen8 and would like to install Proxmox on it to pass the onboard graphics cards (RTX 2070, Radeon) to a Windows 10 VM so that I can use them in Blender. But somehow that does not really work.

Someone an idea how to do that? I would be very grateful for a tutorial.

MFG 

Kirito

↧

Server gets Down Automatically

September 7, 2019, 11:28 pm
$
0
0

Dear All,

    Good Day ! We have a server proliant DL380 G9. which was working fine and now it gets down automatically  but no crash in OS level. 

Done few troubleshoot but it will get up & running for few days again it will be down. Kindly rectify.

↧
↧

HPE Proliant ML30 - the Host OS run back when the Processor Core Disable = 1

September 8, 2019, 11:15 pm
$
0
0

Dear All,

my Server is HPE Proliant ML30 Gen 9.

Host OS is ESXI 6.5.0 

RAM 64G, in each 16G in 4 slot 

CPU xeon E3-1240v5 

it turn to PSOD after run in 2 years.

-------------------------------------------------

check IML:

Uncorrectable Machine Check Exception (Board 0, Processor 0, APIC ID 0x00000006, Bank 0x00000000, Status 0xBD800000'00000006, Address 0x00000000'00000000, Misc 0x000007FE'8A97D000)

And when i change core diable in BIOS from [0] to [1]

the host run back.

Question:

- CPU broken or not, do i need to replace cpu?

- can i run the host as normal with this situation?

- why i change the processor core diable = 1 per socket the host OS work again as CPU not failed?

-  what is the meaning of the processor core diable?

Thanks all for your time

↧

Nividia Tesla K40 not working properly on Hp Proliant ML350p Gen 8

September 8, 2019, 10:54 pm
$
0
0

I'm trying to connect my Nvidia Tesla K40 with my Hp Proliant ML350P.

Specs: HP Proliant ML350P Gen 8 Tower

DUAL e5-2670 V1 CPU

32gb DDR3 RAM

Dual 750W PSU

350GB Raid, 500gb SSD and 2Tb Disc HD

OS: Windows 10 Pro. Hardware is stable with OS.

I had connected an Nvidia Gtx 1060 6gb GPU and it worked great using a 6pin power cable and was stable.

I then took the GTX 1060 out and put in an Nvidia Tesla k40 (passive heat sink) but was unable to get it to work/register in bios when plugging 6pin and 8pin power. However, it was able to register/detect the Tesla K40 without the power cables and just using the PCI-e power. However when that was the case, I received the Code 12 lack of resources error message in the device manager,

Nvidia Tesla k40 is in the servers quick spec manual as compatible, so would be great to hear from you experts of any other technicalities that may be preventing it from working/registering when the 6pin and 8pin are connected.

 

Thanks in advance.

 

Cheers Mark

↧

HPE Proliant DL385 GEN 10 Windows server Installation and Smart Array problems

September 8, 2019, 11:49 pm
$
0
0

Dears,

 

Good day, I have issues with HPE Proliant DL385 GEN 10 Installation and Smart Array,  when I create the smart array and tryed to install both windows server 2012 r2 and 2016 the smart array is not showing, the problem is when I enter the windows installation window the array which created is not listed there,

is there any recommendations from your side may I try to fix these issue.

Please note that I am not professional in HPE products so please explain everything in details.

Thanksin advance.

↧
Search

Upgrade ESXi6.0 to 6.7 with custom image

September 10, 2019, 3:24 am
$
0
0

Hello,

I could download and sucessefully install the custom image from HP of ESXi 6.0 U3 that contains the drivers for our Proliant DL360e Gen8.

I would like to upgrade into ESXi 6.7 but There's not custom image for the server Proliant DL360e Gen8.

Anyone allready install the ESXi 6.7 on a this server? Any tips?

thanks in advance!

doa82

↧
↧

Device discovery in progress. Refresh the page in a few minutes.

September 10, 2019, 3:46 am
$
0
0

Good afternoon, colleagues!
Today, one server suddenly launched Device discovery, this process has been going on for 16 hours, someone has encountered a similar problem, what is better to do in such situations?

↧

ProLiant DL380 G6 Fan failure

September 11, 2019, 2:19 am
$
0
0

Hello everyone,

One of the 6 fans in my ProLiant DL380 G6 server stopped working recently, causing the machine to gracefully shutdown in a few hours, due to insufficient cooling capacity (even though the machine was idle).

I opened the server and swapped around the failing fan, only to find out that it worked flawlessly in other sockets. Conversely, any of the other functional fans that I placed in the socked of the initially failing fan did not work at all, so it seems that it's the socked that is faulty. Also, in the process of performing these tests, the adjacent socket seems to have become faulty as well.

I have visually checked the pins in the connectors and they are fine. Also, I have measured with a multimeter the voltage of the 12V pin in both faulty sockets and it was close to 0V (a few tens of millivolts), whereas the other fuctional sockets showed the expected 12V.

The machine is quite old and I don't have a service contract. It seems to be a motherboard problem, but I am not sure if something can be done to recover (part of) the functionality.

Any comments/suggestions will be much appreciated.

Best regards,

CRLS

 

 

 

 

 

↧

Missing HP Tools

September 11, 2019, 10:38 am
$
0
0
Hi 

My HP Proliant Microserver Gen 8 won't install HP Tools when I have running HP Smart Update Manager. 

even when I have trying to install via Intelligent Provising, Windows Server 2019.

 

Sokoban

 

 

 

↧

Prosesor Intel Xeon X5690 compatible with HP ProLiant ML350 G6 Server?

September 11, 2019, 7:38 pm
$
0
0

I have an HP ProLiant ML350 G6 Server, I want to add a second processor. I'm going to buy an Prosesor Intel Xeon X5690. Is this processor compatible with my server?

good GPU recommendations for my server?

I will use my server for computing

 

↧
↧

Missing HP Tools

September 11, 2019, 10:38 am
↧

ProLiant DL380 G7 HDD Power Supply Status: Not Redundant

September 9, 2019, 11:48 pm
$
0
0
Hi, I have ProLiant DL380 G7 with RAID 1 configuration. One of the HDD's (in Bay 2) has "Power Supply Status: Not Redundant" issue. Is this a power supply or a hard drive issue? Is replacing the hard drive will fixed this? Can I just grab a had drive with the same type from other server as a replacement or it needs to be a new hard drive? Please advise. Thanks in advance.
↧
Search

HPE DL360 G7 firmware update

September 12, 2019, 2:16 am
↧

Dl380 Gen 10 Windows Server 2016

September 12, 2019, 6:09 am
$
0
0

HI have a DL380 Gen10 with Windows Server 2019 Datacenter. 

Where can i download Windows Server 2016 for HPE DL380 gen10 ISO to install Windows Server 2016?

 

↧
↧

ML310e Gen8 Smart Array P410 no SATA drive LED's

September 12, 2019, 1:02 pm
$
0
0

Hello,

I just purchased a "refurbished" ML310e Gen8 with a P410 array. Raid array is 4 4TB SATA drives in a Raid 5 configuration.

I have tested all the hardware and updated to the latest firmware. Installed Server 2012 R2 and all HP drivers from the HPE SPP 8.1.

My issue is, I have no status LED's on the drives in the array. The LED's all flash during power up and then stay dark. All diagnotics show the array and the controller are working. Server boots normally.

Any ideas?

↧

while booting HP ProLiant DL360p Generation 8 getting ilo embedded health initialization error and s

September 12, 2019, 2:24 pm
$
0
0

Folks,

I replace system board on HP ProLiant DL360p Generation 8 and after that i rebooted machine but it gets stuck on bios at 68% 

iLo embedded health initialization

↧

G8 DL 380p server and p840 controller

September 12, 2019, 6:54 am
$
0
0

Hi,

I have G8 DL 380p server and I would like to buy p840 controller. Is it possible to use it in G8 server? Is there some a technical limit?

I would like to extend my server about 25 sff cage and I want to use 12G drives.

thank you

↧
Viewing all 10362 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>