I have 2 questions:
1 - Can the failed drive be replaced with a 300GB SAS drive?
2 - When the array rebuilds is the data still available or will it be offline until the array has finished building?
Thanks
Dears,
getting an issue while performing a reboot a host OS "redhat 7.'4" with virtualization enabled, running on of an HPE DL 360 server,
i have installed a VM with cpu pining to install a VM on.
Have anyone faced the same or have an idea?
Bios setting:
Hyperthreading Desabled.
RAID1, and leagacy boot mode
Thanks in advance for your support.
Hi,
I would like to know if we can divide two disks into two partitions each and then create raid 1 with one from each physical drive.
Can it be possible?
BR,
Hongseo
Hi,
I'm using 02 HPE Integrity rx2800 i2 Servers.
I access to server system heath via iLO3 in order see status of server components but there is not any information about hard dirves.
Does any one know the reason, and how can I see my HD?
Thanks.
SUM 8.5.6 throws a python stacktrace while running smartupdate upgrade:
OS: RHEL 7.8
Verified on multiple servers and generations (DL380 Gen10, DL380 Gen9, DL380p Gen8).
Hi!
I am creating an OEM Install of Windows Server 2012 R2 for Proliant DL380 G10 servers.
After installation there is a "Virtual NIC" device shown in device manager as a device without approriate driver.
I did not find a driver for this device. It is a plain DL380 G10 without additional hardware.
PN: P06420-B21
Thanks for your support.
1.316376] Initramfs unpacking failed: LZMA data is corrupt
1.568374] Kernel Panic - not suncing: VFS: Unable to mount rootfs on unknown-block (0.0)
Podem me ajudar, Já tentei de tudo, pra conseguir instalar só pela porta sata interna com 1 hd instalei sistema, mas não consigo ler os outros Hds do servidor
Google Translated
1.316376] Initramfs unpacking failed: LZMA data is corrupt
1.568374] Kernel Panic - not suncing: VFS: Unable to mount rootfs on unknown-block (0.0)
Can you help me, I've tried everything, to be able to install only through the internal sata port with 1 hd I installed the system, but I can't read the other Hds on the server
P.S<Admin> This post was moved as a new Topic from
Is there a quarterly rollup package available for the ML350 Gen 8 running Windows Server 2012?
I tried to use the sum update but it can't find a baseline. (Do I need to download that?)
Dear All
What is the different between
1. HP Firmware ISO HP_IP_Firmware_Gen9.iso
and
2. HP_SPP_Firmware_gen9_Gen10.iso
Thank you
Are there mounting brackets or a mounting tray that would support installing a 3.5" hard drive in one of the two media bays normally populated by a DVD or tape drive? I'd like to install more than the 4 drives in the LFF drive cage.
Hello everyone,
sorry for my english.
I'm trying to install 2019 evaluation in my two new HP ML360Gen10, but with Intelligent provisionig after I entered in IP and created raid 5 and started the OS installation process, once the OS install started it throws an error saying that
WINDOWS CANNOT FIND THE MICROSOFT SOFTWARE LICENSE TERMS. MAKE SURE THE INSTALLATION SOURCES ARE VALID AND RESTART THE INSTALLATION.
After I tried SMB ,but it showed me an error:
"We see storage volumes, but the controller or the disks themselves are reporting errors. You will not to be able to install an Os at this time. You can use The Hardware validation Tool on the following pages to diagnose the problem".
I used the HVT tool and no problem showed me.
I used the Intelligent Storage configuration and showed me that
"No controllers Found. If there are controller installedand detected, possibly the server has not completed POST, please come back to this page after POST".
But the controller exist! I Have a RAID 5 with 8Hdd.Please
Please Can We help me? thanks
Hello everyone,
sorry for my english.
I'm trying to install 2019 evaluation in my two new HP ML360Gen10, but with Intelligent provisionig after I entered in IP and created raid 5 and started the OS installation process, once the OS install started it throws an error saying that
WINDOWS CANNOT FIND THE MICROSOFT SOFTWARE LICENSE TERMS. MAKE SURE THE INSTALLATION SOURCES ARE VALID AND RESTART THE INSTALLATION.
After I tried SMB ,but it showed me an error:
"We see storage volumes, but the controller or the disks themselves are reporting errors. You will not to be able to install an Os at this time. You can use The Hardware validation Tool on the following pages to diagnose the problem".
I used the HVT tool and no problem showed me.
I used the Intelligent Storage configuration and showed me that
"No controllers Found. If there are controller installedand detected, possibly the server has not completed POST, please come back to this page after POST".
But the controller exist! I Have a RAID 5 with 8Hdd.Please
Please Can You help me? thanks
Hi,
I downloaded ILO Amplifier and entered 100 servers during the registration. In the Q&A there is stated that there is no fixed limit for the number of servers. But on the info page in ILOAmplifier GUI I found this:
When attaching an iso image to a DL380Gen10 machine it works fine for some time and then for some reason a couple of reboots later becomes not visible anymore so can't boot the system from the virtual media. Every now and then I also see messages like connection to ilo has been denied yet I'm still connected with an admin user. Any idea?
Hello, I need to update our server documeation. Has HP publsihed end of life/end of service dates for the following models?
Proliant DL560 G8
Proliant DL360 G9
I am wanting to buy a HP Proliant Ml150 G6 but from what I have heard, the iLO is a bit different than the 300 series counterparts. Can you explain please?
Good morning, everybody,
I need your help with a problem that I can't solve.
I have a Gen10 Microserver that is only an administration manager where only one program running is installed.
In practice, every now and then the server stops/restarts correctly only without my giving the command. I've noticed that it has some important peaks in the CPU that reaches even 100%. But I have not noticed any articular applications that justify this.
I have found that one way to solve the problem is to update the BIOS of the machine. Is this possible?
You can help me or give me feedback.
Thank you in advance
Jacopo Sandri
Please join us for the Online Expert Day on June 16-17 , 2020. Our Experts will be Live for 24 hours.
More detailed information is available here
Online Expert Day June 2020- Servers, Storage, Networking & Software-Defined Infrastructure
Hello
Is there any HP website or tools to check the EOL or EOS of the servers using Product Number and/or Serial Number. Or any other method to check ?
Thank you