speed write to disk
HelloI use a ML350 (Novell 6,5) with a SA641 scsi raidcontroller with 4 disks 36 Mb. When I write to disk the speed is max. 1200 kb/sec by small blocks (512) this speed is getting higher with greater...
View ArticleHP Smart Array with Super Micro Enclosure (LSI based expanders)
Hello all,We have a DL360P Gen8 with a Smart Array P822 controller that is being used with a SuperMicro sc847de16 enclosure. This enclosure is a 45 disk JBOD with an LSI based expander in each...
View ArticleP420i add Parity Group.
Hi!Two quick questions. Long time since I did some real hardware configuration. Anyway.Current configuration: => ctrl all show config detailSmart Array P420i in Slot 0 (Embedded)Bus Interface:...
View Articleserveur hp proliant serveur hp proliant
hello,a have probleme in hp proliant server,i have this error :smart array p104i controller on system boardPhysical drive- port......status: Predictive failure. any idea pleeze
View ArticleHP Proliant DL 360 Gen9 do not detect all HDDs installed
Hi, I have an issue with server HP Proliant DL 360 Gen9. Server has 2x 600 GB and 8x 900 GB drivers. Disks are connected to HP Smart Array P440ar/2G (raid mode). Server detects only 6x 900 GB drives, 2...
View ArticleHP PROLIANT ML310E GEN8 V2
WE HAVE BOUGHT ONE SERVER HP PROLIANT ML310E GEN8 V2 WITH 2 HARD-DISKS (2 x 1To).BUT ONLY ONE APPEARS IN WINDOWS SERVER 2012 R2.
View ArticleHP ProLiant DL580 Generation 5 Error led red
Al prender servidor HP ProLiant DL580 Generation 5 Hace un Pitido y empieza a poner en Rojo Boton numero 3 Indicador LED de estado externo del sistema Rojo (parpadeando) = Estado externo del sistema...
View ArticleHP ProLiant DL580 Generation 5 Error led red
Al prender servidor HP ProLiant DL580 Generation 5 Hace un Pitido y empieza a poner en Rojo Boton numero 3 Indicador LED de estado externo del sistema Rojo (parpadeando) = Estado externo del sistema...
View ArticleHP DL380P G8
I have DL380 configured RAID 0 two hard disk 300G, and have critical data My Q for redadancy its better : 1.Add another two 300G hard disk and confiure Raid 1 without any losing data, its possible ?...
View Article130W+ one socket server, cheap and fast - when?
I'm using HP server for HFT trading.In HFT it's preffered to use single-processor config (no QPI latancy, no NUMA etc)Recent processors offer up to 18(!) cores, this is enough for HFT in most cases. So...
View ArticleDL980 G7 Lower Processor Drawer
We had an issue on our DL980 G7 server and had to replace the lower processor drawer. We got two of those from HP and another vendor but when we replaced our drawer, our system wouldn't POST. We've...
View ArticleAgain: Third Party SSD on ML150 Gen9
Hi everybody, I know, it was asked several times, but may be there are some updates meanwhile, which give me some hope! :-) I'm tied to HP servers since many years and am offering Proliant ML150 Gen9...
View ArticleHP ProLiant ML350 G4p. What HDD is suitable?
Hi everybody!. I have a old HP ProLiant ML350 G4p that I would like to increase it´s storage, but I´m a total rookie here. I posted a few pictures of the outside and inner parts of the server in the...
View ArticleProLiant ML350 G5 HDD with different spare number problem (Enquiry)
We've same server model at two different site which are not near each other on location.Site-1 Server is occassionaly down and we may give up.Site-2 Server already have two HDD failed. (Raid-5 with 4...
View ArticleML 350 G6 does not power on
Hi, Monday morning we found our server ML 350 G6 down, The power supply seems to be working, because it was tested on another server and it started ok When we plug the power supply two things happens,...
View ArticleWhich Server is best DL 380E GEN 8 OR dL 380 gEN 9?
Which Server is best DL 380E GEN 8 OR dL 380 gEN 9? COMPARING ALL THE FEATURES IS THE DL 380 E REACHING END OF LIFE?
View ArticleRAID 5 replacement disk
This is my first experience with RAID. If I have a disk failure (3 drive RAID setup) in RAID 5 under W2k and buy a replacement drive, does the dirve have to be formatted as NTFS first or will it...
View ArticleHorrible Write Performance with Smartarray P400 in DL320, DL320s and DL1xx
We are a small hosting company in austria and are using P400 controllers in about 20 HP Servers (DL 320(s), 160, 180)Now, since more servers have mucher to do, we recognize very strange...
View ArticleHp P400 only 30mb/sec
I've had a terrible time with this. I have an HP p400. It started with 256mb cache but I upgraded to 512mb with bbwc and got nothing out of it, I was still maxing out at 10mb/sec. I finally found the...
View ArticleMemory problem on DL580 G7 512Gb
Hi.We have some problem with memory on DL580G7.After suddenly fail our server lose about 32Gb memory.Our configuration is 8 memory riser x 8x8Gb on each and must be 512Gb.So we have try mix,remap...
View Article